Microchip electrophoretic protein separation using electroosmotic flow induced by dynamic sodium dodecyl sulfate-coating of uncoated plastic chips

Separation of sodium dodecyl sulfate (SDS)-protein complexes is difficult on plastic microchips due to protein adsorption onto the wall. In this paper, we elucidated the reasons for the difficulties in separating SDS-protein complexes on plastic microchips, and we then demonstrated an effective method for separating proteins using polymethyl methacrylate (PMMA) microchips. Separation difficulties were found to be dependent on adsorption of SDS onto the hydrophobic surface of the channel, by which cathodic electroosmotic flow (EOF; reversed flow) was generated. Our developed method effectively utilized the reversed flow from this cathodic EOF as a driving force for sample proteins using permanently uncoated but dynamic SDS-coated PMMA microchips. High-speed (6 s) separation of proteins and peptides up to 116 kDa was successfully achieved using this system.     

烟碱分子烙印聚合物的吸附特性

利用分子烙印技术，以烟碱为烙印分子，甲基丙烯酸(MAA)为功能单体，乙二醇二甲基丙烯酸酯(EDMA)为交联剂，合成了对烟碱具有特异性作用的分子烙印聚合物P(Nic)；通过平衡吸附实验，评价了其对烟碱的亲和力和选择性。与非烙印聚合物相比，P(Nic)对烟碱表现了很高的亲和力；Scatchard分析表明在P(Nic)中存在对烟碱有不同的亲和力的两类作用位点。通过与氨基吡啶类物质在P(Nic)上的吸附行为比较，表明P(Nic)对烟碱具有很好的选择性。本工作证明了用P(Nic)作为固相萃取(SPE)材料选择性地从烟草烟雾中提取烟碱的可能性。     

Preparation, characterization and effect of annealing on performance of cellulose acetate/sulfonated polysulfone and cellulose acetate/epoxy resin blend ultrafiltration membranes

Polymeric membranes based on cellulose acetate (CA)--sulfonated polysulfone blends at three different polymer compositions were prepared by solution blending and phase inversion technique, characterized and subjected to annealing at 70, 80 and 90 °C. The permeate water flux, separation of bovine serum albumin and its flux by the blend membranes before and after thermal treatment, have been compared and discussed. Similarly, CA and epoxy resin (diglycidyl ether of bisphenol-A) were blended in various compositions, in the presence and in the absence of polyethyleneglycol 600 as non-solvent additive, using N,N^′-dimethylformamide as solvent, and used for preparing ultraflltration membranes by phase inversion technique. The polymer blend composition, additive concentration, casting and gelation conditions were optimized. Blend membranes were characterized in terms of compaction, pure water flux, water content and membrane resistance. The effects of polymer blend composition and additive concentration on the above parameters were determined and the results are discussed.     

Spherical molecularly imprinted polymers (SMIPs) via a novel precipitation polymerization in the controlled delivery of sulfasalazine

Spherical molecularly imprinted polymers (SMIPs) have been prepared via a novel precipitation polymerization using sulfasalazine (prodrug used in the diseases of the colon) as template. The sulfasalazine was incorporated into SMIPs and into a spherical non-imprinted polymer (control), and then the release rate of the bioactive agent at different pH values was evaluated. Considerable differences in the release characteristics between imprinted and non-imprinted polymers have been observed. This opens the possibility of the development of drug release systems capable of modulating the release of a specific molecule. Photomicrography of spherical molecularly imprinted polymers (SMIPs).     

Separation of proteins with a molecular mass difference of 2 kDa utilizing preparative double-inverted gradient polyacrylamide gel electrophoresis under nonreducing conditions: application to the isolation of 24 kDa human growth hormone

A method for separating proteins with a molecular mass difference of 2 kDa using SDS-PAGE under nonreducing conditions is presented. A sample mixture containing several human growth hormone (hGH) isoforms was initially separated on a weak anion-exchange column. Fractions rich in 24 kDa hGH as determined by analytical SDS-PAGE were pooled and further separated by cation-exchange chromatography. The fractions pooled from the cation-exchange chromatography contained two hGH isoforms with a 2 kDa molecular mass difference according to SDS-PAGE analysis, 22 and 24 kDa hGH. The 22 and 24 kDa hGH were separated using continuous-elution preparative double-inverted gradient PAGE (PDG-PAGE) under nonreducing conditions. The preparative electrophoresis gel was composed of three stacked tubular polyacrylamide matrices, a 4% stacking gel, a 13-18% linear gradient gel, and a 15-10% linear inverted gradient gel. Fractions containing purified 24 kDa hGH were pooled and Western blot analysis displayed immunoreactivity to antihGH antibodies. PDG-PAGE provides researchers with an electrophoretic technique to preparatively purify proteins under nonreducing conditions with molecular mass differences of 2 kDa.     

Synthesis and evaluation of new propazine-imprinted polymer formats for use as stationary phases in liquid chromatography

Silica particles have been used as supports for the preparation of three different propazine-imprinted polymer formats. First format refers to grafting of thin films of molecularly imprinted polymers (MIPs) using an immobilised iniferter-type initiator (inif-MIP). The other two new formats were obtained by complete filling of the silica pores with the appropriate polymerisation mixture leading to a silica-MIP composite material (c-MIP) followed by the dissolution of the silica matrix resulting in spherical MIP beads (dis-MIP). These techniques offer a mean of fine-tuning the particle morphology of the resulting MIP particles leading to enhanced capacity in chromatographic applications. Porous silica (specific surface area S = 380 m² g⁻¹, particle size p_s = 10 μm, pore volume V_p = 1.083 ml g⁻¹ and pore diameter d_p = 10.5 nm), methacrylic acid and ethylenglycol dimethacrylate were used for the preparation of the materials. All the MIP formats imprinted with propazine have been characterised by elemental analysis, FT-IR spectroscopy, nitrogen adsorption and scanning electron microscopy. Further, the materials were assessed as stationary phases in HPLC. Capacity factors, imprinting factors and theoretical plate numbers were calculated for propazine and other related triazines in order to compare the chromatographic properties of the three different stationary phases. For the inif-MIPs the column efficiency depended strongly on the amount of grafted polymer. Thus, only the polymers grafted as thin films of ca. 1.3 nm average thickness show imprinting effects and the highest column efficiency giving plate numbers (N) of 1600 m⁻¹ for the imprinted propazine. The performance of the c-MIP stationary phase decreases as result of the complete pore filling after polymerisation and increases again after the removal of the silica matrix due to a better mass transfer in the porous mirror-image resulting polymer. From this study can be concluded that the inif-MIP shows the best efficiency for use as stationary phase in HPLC for the separation of triazinic herbicides.     

Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone

A hydrophilic polymer, poly(N-vinyl-2-pyrrolidone), was tethered on the surface of polypropylene microfiltration membrane (PPMM) by UV photo-assisted and γ-ray pre-irradiation induced graft polymerizations. Results revealed that the γ-ray pre-irradiation graft polymerization was more efficient in view of the grafting degree. The chemical changes of the membrane surface were confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Pure water contact angle on poly(N-vinyl-2-pyrrolidone)-grafted PPMM decreased with the increase of grafting degree, which indicated an enhanced hydrophilicity for the modified membrane. Both bovine serum albumin adsorption and static platelets adhesion were measured to evaluate the bio-compatibility of the poly(N-vinyl-2-pyrrolidone)-modified PPMM. The statistical amounts of adsorbed bovine serum albumin and adhered platelets on unit membrane area decreased significantly, which to a certain degree demonstrated that the hemocompatibility of PPMM was improved. The N₂ permeability and the mean pore diameters of different PPMMs increased at first, then decreased after certain grafting degree. The changes of water flux followed a similar tendency. These indicated that at low grafting degree pore degradation induced by γ-ray irradiation had a major impact on permeability, while this was overcompensated by the grafted polymer at high grafting degrees.     

Synthesis and evaluation of new lipomonosaccharide-imprinted polymers as MISPE supports

Molecular imprinted polymers (MIP) were prepared by the copolymerization of styrene (S) or methyl methacrylate (MMA) and methacrylic acid (MAA) using ethylene glycol dimethacrylate (EGDMA) as the crosslinker with molar ratios of [monomer]/[crosslinker] and [MAA]/[template] of 3:7 (to obtain a rigid structure) and 1:6 (to optimise hydrogen interactions), respectively. The polymerizations occurred in presence of the template molecule (MIP) - GlcNcouma - an amphiphilic monosaccharide. The same materials, non-imprinted polymers (NIP), were also prepared in absence of the template. These MIPs were characterized and used as SPE supports for selective enrichment. The results showed the correlation between retention efficiency and the porogen character of the polymerization solvent.     

二次乳化法(W/O)/W制备蛋白质流通色谱固定相的研究

以甲基丙烯酸缩水甘油酯为单体,二甲基丙烯酸乙二醇酯为交联剂,甲苯与正庚烷为有机致孔剂,20%的甘油水溶液为内水相(超孔致孔剂),利用二次乳化法制备了(W/O)/W乳液,通过紫外光引发悬浮聚合生成两类孔型高分子微球(BiPB).BiPB孔径为双峰分布,范围分别在10~100nm和1000~7300nm之间;而其体积平均粒径、比表面积、湿密度、静态吸附容量与不含超孔的微孔介质(MiPB)接近.修饰相同二乙胺密度的BiPB和MiPB介质虽在较低流速(5cm/min)下有相近的动态吸附容量,但在高流速(40cm/min)下BiPB的动态吸附容量约为MiPB的动态吸附容量的3倍,表明BiPB介质的超孔结构对孔内传质的强化作用,因而其更适合于高速的蛋白质色谱分离.     

Preparation, characterization and properties studies of quinine-imprinted polymer in the aqueous phase

The uniform-sized spherical molecularly imprinted polymers were successfully prepared through molecular imprinting technology by two-step seed swelling and mini-emulsion polymerization in the aqueous condition using quinine as template molecules and methacrylic acid (MAA) as functional monomer. The polymers were characterized by IR spectra, thermal-weight analysis, scanning electron microscope and laser particle size analysis. The properties of imprinted polymers were investigated in different organic phases and aqueous media. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions) between acidic monomer/polymer and template molecules are mainly responsible for the binding and recognition; whereas in the aqueous medium, a considerable recognition effect was also obtained where the ionic (electrostatic) interaction and hydrophobic interaction play an important role. The experiments of binding different substrates indicated that the MIPs possessed an excellent rebinding ability and inherent selectivity to quinine. __________ Translated from Zhongshan Dcocue Xuebao/Acta Scientianum Natralium University Sunyatseni, 2005, 44(3)(in Chinese)