Determination of the uronic acid composition of seaweed dietary fibre by HPLC

A high-performance liquid chromatographic (HPLC) method is described for determination of the ratio of beta-d-mannuronic acid to alpha-l-guluronic acid (M/G ratio) in dietary fibre of edible seaweeds. Total dietary fibre (TDF) content was determined gravimetrically. The TDF fraction was hydrolysed with 12 m and 1 m H(2)SO(4), then neutralized with AG 4 x 4 resin. The uronic acids were separated in a Tracer Extrasil SAX 5 micro m column (25 cm x 4 mm) at 35 degrees C, with 2 mm KH(2)PO(4) containing 5% methanol as mobile phase at a fl ow rate of 1.5 mL/min. The detection wavelength was UV 210 nm. The chromatographic identifications of beta-d-mannuronic acid and alpha-l-guluronic acid were confirmed by liquid chromatography-mass spectrometry (LC-MS). The method precision was 1.4% for beta-d-mannuronic acid and 3.5% for alpha-l-guluronic acid. The method was used to determine M/G ratio in canned seaweeds (Saccorhiza polyschides and Himanthalia elongata) and in dried seaweeds (H. elongata, Laminaria ochroleuca, Undaria pinnatifida, Palmaria sp. and Porphyra sp.).     

Preparation and Characterization of Trimethylsilylpyridylacetylene Bridged,Dicobalt Carbonyl Complexes Containing Bis(diphenylphosphino)methylene or Bis(diphenylphosphino)ethylene Ligand

Reaction of an alkyne‐bridged dicobalt complex, [Co₂(CO)₆(μ‐Me₃SiC=Cpy)] 4 , with bis(diphenylphosphino)methylene (DPPM) or bis(diphenylphosphino)ethylene (DPPE) in THF at 55 °C yielded a DPPM or DPPE doubly bridged dicobalt compound, [{μ‐P,P‐PPh₂CH₂PPh₂}Co₂(CO)₄(μ‐Me₃SiC=Cpy)] 5 or [{μ‐P,P‐PPh₂CH₂CH₂PPh₂}Co₂(CO)₄(μ‐Me₃SiC≡Cpy)] 6 . Compound 5 and 6 were characterized by spectroscopic means as well as X‐ray crystal structure determination.     

Open-access liquid chromatography/mass spectrometry in a drug discovery environment

The use of open-access mass spectrometry to monitor synthetic chemistry reactions, and also the integrity and purity of new chemical entities, has been a part of the medicinal chemist's tool-box for more than 5 years. Originally in our group at Wyeth Research there were two open-access methods available to the chemists, flow injection analysis (FIA) and liquid chromatography/mass spectrometry (LC/MS). The FIA method was approximately 3 min long, while the LC/MS method was approximately 20 min long (including an 8 min gradient). Within the first 2 years, the total number of open-access analyses increased by approximately 125%. It is interesting, however, that the number of LC/MS analyses increased by more than 285%. This is attributed to the fact that the chemists began using the LC/MS data to monitor reactions and also to check final product integrity and purity. In addition, the number of chemists performing parallel synthesis reactions has increased; thus, individual chemists can produce sample sets of up to 100 vials. This paper describes the implementation of new methodology, which accommodates the need for much faster run times and also the ability to acquire alternating positive and negative ion spectra within the same run. In addition, the instrument has been configured to e-mail the resulting processed data report to the submitting chemist. Several methods have been developed, including structure elucidation using in-source collision-induced dissociation (CID) and night-time analysis. The LC/MS methods for this system are described herein and are applicable to both industrial and academic synthetic chemistry optimization efforts.     

Characterization of proteins separated by displacement chromatography using low angle laser light scattering photometry

Summary -Lactoglobulin A and B (-LACT) were separated by displacement chromatography (DSC) on an ionexchange column using dextran sulfate as the displacer. A LALLS photometer and a UV detector, in series, were used to determine the molecular weight (MW) of the proteins, on-line. The results indicate that both, -LACT A and B, were present as dimers in the buffer used for the mobile phase. The MWs of the proteins were about 6–8% higher than the theoretical MW of a dimer (37,000). Additional control studies have shown the presence of a high molecular weight species in both the proteins, which could possibly be an aggregate. This species was observed in the LALLS signal but was nearly absent in the UV signal. Our work has demonstrated the feasibility of interfacing LALLS with displacement chromatography for detecting impurities or aggregates which may be difficult to detect by conventional detectors used for chromatography.     

Conformational changes of the amyloid beta-peptide (1-40) adsorbed on solid surfaces

The conformational change of the 39-43 residues of the amyloid beta-peptide (Abeta) toward a beta-sheet enriched state promotes self-aggregation of the peptide molecules and constitutes the major peptide component of the amyloid plaques in Alzheimer patients. The crucial question behind the self-aggregation of Abeta is related to the different pathways the peptide may take after cleavage from the amyloid precursor proteins at cellular membranes. This work is aiming at determining the conformation of the Abeta (1-40) adsorbed on hydrophobic Teflon and hydrophilic silica particles, as model sorbent surfaces mimicking the apolar transmembrane environment and the polar, charged membrane surface, respectively. The mechanism by which the Abeta interacts with solid surfaces strongly depends on the hydrophobic/hydrophilic character of the particles. Hydrophobic and electrostatic interactions contribute differently in each case, causing a completely different conformational change of the adsorbed molecules on the two surfaces. When hydrophobic interactions between the peptide and the sorbent prevail, the adsorbed Abeta (1-40) mainly adopts an alpha-helix conformation due to H-bonding in the apolar part of the peptide that is oriented towards the surface. On the other hand, when the peptide adsorbs by electrostatic interactions beta-sheet formation is promoted due to intermolecular association between the apolar parts of the adsorbed peptide. Irrespective of the characteristics of the solid sorbent, crowding the surface results in intermolecular association between adsorbed molecules leading to a strong aggregation tendency of the Abeta (1-40). [Diagram: see text] CD spectra of Abeta (1-40) at pH 7: A) in solution ([Abeta]=0.2 mg.ml(-1)) freshly prepared (line) and after overnight incubation (symbols);B) on Teflon (Gamma=0.5 mg.m(-2)).     

[M(en)3] (ndt)•H2O的水热合成、晶体结构和光学性能 ( M=NiⅡ, CoⅡ, MnⅡ and ndt=1,5-naphthalenedithiolate )

水热条件下，合成了三个新的配合物[Ni(en)₃] (ndt) ·H₂O 1, [Co(en)₃] (ndt) ·H₂O 2 和[Mn(en)₃] (ndt) ·H₂O 3。晶体结构通过X-射线单晶衍射进行了表征。三个配合物均属于单斜晶系，Cc空间群。[M(en)₃]²⁺阳离子、ndt阴离子和结晶水分子通过氢键自组装出相同结构的三维网。通过紫外-可见-近红外漫反射光谱对这三个配合物的光吸收性能和能带进行了测定。     

Capillary electrophoresis coupled to time of flight-mass spectrometry of therapeutic peptide hormones

We have established a method for separation and characterization of a series of peptide hormones of pharmaceutical interest and wide therapeutical use by capillary electrophoresis-electrospray-mass spectrometry (CE-ES-MS) using a sheath flow interface. Several parameters were systematically investigated, such as concentration of the electrolyte, organic solvent and sheath liquid composition, gas flow rates and capillary position. Moreover, limits of detection, linearity, repeatability and day-to-day reproducibility of the proposed method were studied in order to obtain the main quality parameters.     

Immobilization of a Monolayer of Bovine Serum Albumin on Gold Nanoparticles for Stereo‐specified Recognition of Dansyl‐norvaline

The assembly strategy to prepare a monolayer of bovine serum albumin on the surface of silica gel supported gold nanoparticles is described. The stereo‐specific recognition ability of this material was evaluated by enantioresolution of Dansyl‐norvaline. For enantiomeric separation, the influences of buffer concentration and the concentration of organic modifier on the separation performance were investigated. A better separation in terms of enantioresolution and peak shape was found with the phosphate concentration at 30 mM. Moreover, the peak shape and resolution can be improved by the addition of methanol solution. Enantioresolution of Dansyl‐norvaline was obtained from this material at optimized conditions. It appears that the immobilization of a monolayer of bovine serum albumin on gold nanoparticles as the chiral selector of Dansyl‐derivative amino acid is promising.     

Detection of single nucleotide polymorphisms using electrospray ionization mass spectrometry: validation of a one-well assay and quantitative pooling studies

Single nucleotide polymorphisms (SNPs) are currently being mapped and databased at a remarkable pace, providing a viable means for understanding disease susceptibility, differential drug response and human evolution. Consequently, there is an increasing demand for SNP genotyping technologies that are simple, rapid, cost effective and readily amenable to automation for high-throughput analyses. In this study, we improved the Survivor Assay, a SNP detection method based on electrospray ionization mass spectrometry (ESI-MS), with several developments. One improvement is the development of a one-well assay, requiring no off-line purification of the polymerase chain reaction product, achieved by simple addition of reagent solution into a single well. Another is the on-line separation of magnesium and dideoxynucleotides using an in-house made monolithic metal chelating column, eliminating any off-line sample preparation prior to mass spectrometric analysis. Here the Survivor Assay is extended from a proof-of-principle concept to a validated method by genotyping six SNPs from five different regions of human genomic DNA in 55 individual samples with 100% accuracy. This improved Survivor Assay eliminates the tedious and time-consuming steps of sample preparation, minimizes sample handing and offers a high-throughput analysis of SNPs by ESI-MS. The current combined preparation and analysis time is 2 min per sample. The simplicity of this method has potential for full automation and parallel chromatography and, thus, reduced analysis time. In addition, we have adapted the Survivor Assay for quantitative SNP analysis in pooled DNA samples. The capabilities and sensitivity of this approach were evaluated. We demonstrate that an allele occurring at a frequency of 2% can consistently be quantitated.