Simultaneous Determination of Seven Pesticides and Metabolite Residues in Litchi and Longan through High-Performance Liquid Chromatography-Tandem Mass Spectrometry with Modified QuEChERS

This study established a QuEChERS high-performance liquid chromatography/tandem triple-quadrupole mass spectrometry method for determining azoxystrobin, pyraclostrobin, picoxystrobin, difenoconazole, chlorantraniliprole, imidacloprid, and cyantraniliprole and its metabolite (IN-J9Z38) in litchi and longan, and applied this method to the real samples. The residues in samples were extracted with acetonitrile and purified with nano-ZrO₂, C₁₈, and PSA. The samples were then detected with multireactive ion monitoring and electrospray ionization in the positive ion mode and quantified using the external matrix-matched standard method. The results showed good linearities for the eight analytes in the range of 1–100 μg/L, with correlation coefficients (r²) of >0.99. The limit of quantification was 1–10 μg/kg, and the limit of detection was 0.3–3 μg/kg. Average recovery from litchi and longan was 81–99%, with the relative standard deviation of 3.5–8.4% at fortified concentrations of 1, 10, and 100 μg/kg. The developed method is simple, rapid, efficient, and sensitive. It allowed the rapid screening, monitoring, and confirming of the aforementioned seven pesticides and a metabolite in litchi and longan.     

Analytical methods applied to the determination of pesticide residues in foods of animal origin. A review of the past two decades

Pesticides are widely used in agriculture and can be transferred to animals in a number of ways. Consequently, reliable analytical methods are required to determine pesticide residues in foods of animal origin. The present review covers published methods and research articles (1990-2010) in which pesticide residues have been extracted from meat and meat products, milk and dairy products, fish and seafood, and eggs, then cleaned up, and isolated by chromatographic techniques to be identified and quantified by various detection methods. Recovery rates, quantification limits, the matrix effect and related parameters have all been considered. Lastly, future developments in this field are outlined.     

离子液体溶胀对煤直接液化残渣结构及热解性能的影响

采用四种相同阴离子不同有机链长阳离子的离子液体([EMIM][MeSO_4]、[BMIM][MeSO_4]、[HMIM][MeSO_4]和[OMIM][MeSO_4])对煤直接液化残渣(DCLR)进行溶胀处理,通过SEM、FT-IR和TG-DTG表征,分析了各离子液体溶胀对煤直接液化残渣溶胀效果、表面形貌、官能团分布、主体结构和热解性能的影响。溶胀结果表明,不同链长离子液体对煤直接液化残渣具有不同的溶胀效果,[HMIM][MeSO_4]对残渣溶胀效果最好,其溶胀度高达1.78。FT-IR表明,不同链长离子液体会不同程度地破坏煤中C-H键,使得脂肪族和芳香族类化合物的相对含量有所差异。由TG-DTG可知,不同链长离子液体溶胀对残渣热解性能的影响具有较大差异,其中,以离子液体[OMIM][MeSO_4]溶胀对残渣的热解最为有利,失重率高达47.5%;而离子液体[BMIM][MeSO_4]溶胀在一定程度上抑制了残渣的热解,其失重率低于未经溶胀处理的残渣。基于Coats-Redfern法的热解动力学分析表明,煤直接液化残渣及其溶胀残渣在低温段(180-480℃)的热解过程均符合二级反应动力学,高温段(480-825℃)均以三级和四级反应动力学为宜。另外,不同链长离子液体溶胀处理明显改变了残渣的热解活化能,其链越长残渣的热解活化能越高。     

Conformational dependence of the intrinsic acidity of the aspartic acid residue sidechain in N-acetyl- -aspartic acid-N′-methylamide

The sidechain conformational potential energy hypersurfaces (PEHS) for the γ_L, β_L, α_L, and α_D backbone conformations of N-acetyl- -aspartate-N′-methylamide were generated. Of the 81 possible conformers initially expected for the aspartate residue, only seven were found after geometric optimizations at the B3LYP/6-31G(d) level of theory. No stable conformers could be located in the δ_L, _L, γ_D, δ_D, and _D backbone conformations. The ‘adiabatic’ deprotonation energies for the endo and exo forms of N-acetyl- -aspartic acid-N′-methylamide were calculated by comparing their optimized relative energies against those found for the seven stable conformers of N-acetyl- -aspartate-N′-methylamide. Sidechain conformational PEHSs were also generated for the estimation of ‘vertical’ deprotonation energies for both endo and exo forms of N-acetyl- -aspartic acid-N′-methylamide. All backbone–sidechain (N–H⁻O–C) and backbone–backbone (N–HO=C) hydrogen bond interactions were analyzed. A total of two backbone–backbone and four backbone–sidechain interactions were found for N-acetyl- -aspartate-N′-methylamide. The deprotonated sidechain of N-acetyl- -aspartate-N′-methylamide may allow the aspartyl residue to form strong hydrogen bond interactions (since it is negatively charged) which may be significant in such processes as protein–ligand recognition and ligand binding. As a primary example, the molecular geometry of the aspartyl residue may be important in peptide folding, such as that in the RGD tripeptide.     

IＣＰ－ＡＥＳ法测定铜阳极泥和分银渣中锡、碲的含量

目前资料介绍测定锡的方法大都比较繁琐,本文探索了氢氧化钾、硝酸钾熔融, 在氨水—氯化铵介质中,用氢氧化铁共沉淀分离和富集锡、碲后,标准系列中加入铁,进行基体匹配,用ICP－ＡＥＳ法测定铜阳极泥和分银渣中锡、碲的含量。本文对测定锡、碲的条件及共存元素的干扰情况进行了研究,方法的检出限: 锡为0.0012 μg/mL、碲为0.024μg/mL ;加标回收率：锡为98.00%～100.33%;碲为99.00%～102.00%;相对标准偏差：锡为2.42%～6.61%;碲为：1.32%～11.48%。方法简单快速,易于掌握。测定范围：0.02%～5.0%     

催化剂和供氢剂对渣油模型化合物裂化反应选择性的影响

供氢剂与分散性催化剂协同作用对于传统的煤液化体系和渣油加氢裂化体系非常重要。通过活化分子氢及煤分子，使液化反应在较低的温度下进行以减少副反应，继而提高氢转移效率，增加液体产物产率。供氢剂和催化剂起促进煤分子裂化的作用。将供氢剂与催化剂的协同作用应用于渣油加     

串联质谱法在农药残留分析中的应用

农药残留问题已经成为全球关注的热点问题,尤其是农产品和食品中的农药残留更受到各国政府和公众的普遍关注。快速、准确、灵敏的农药残留分析和检测技术已经成为保障食品安全的有效手段,是当前农药残留分析研究和发展的方向。1983年,McLafferty等发明了串联质谱技术(MS-MS),目前已发展成为一种成熟的技术,在许多研究领域发挥了巨大作用。同样,在农药残留分析领域,串联质谱技术也越来越体现出其定性准确、排除干扰能力强以及灵敏度高的特点。     

高效液相色谱法同时测定甜瓜样品中的抑霉唑和噻菌灵

提出了一种用高效液相色谱法 (HPLC)同时测定甜瓜样品中的抑霉唑和噻菌灵残留量的方法。用乙酸乙酯作提取剂提取甜瓜样品 ,通过一个净化步骤分离样品中共提取组分。采用InertsilC8 3色谱柱 (15 0mm× 4 .6mm ,5 μmi.d ,) ,流动相为乙腈∶水 =75∶2 5 ,外标法定量 ,方法的检出限噻菌灵为 0 .70ng ,抑霉唑为1.5 3ng ;回收率为 87.5 %～ 98.0 % ;相对标准偏差为 1.5 %～ 4 .2 %。本法用于甜瓜样品中抑霉唑、噻菌灵含量的测定 ,获得了满意的结果。     

玉米芯水解残渣热解焦气化反应性研究

利用热重分析仪研究了玉米芯及其酸水解残渣热解焦的气化反应性,重点考察了热解温度、升温速率、气化温度和气化介质(CO₂、H₂O)对残渣热解焦气化反应性的影响,并借助SEM观测了热解焦的表观形貌。结果表明,残渣热解焦的气化反应性较玉米芯热解焦有所下降;在热解温度550~850 ℃,残渣热解焦的气化反应性随热解温度提高而降低,在热解升温速率0.1 K/s下制取的热解焦,其气化反应性低于15.0 K/s下的热解焦;在气化温度850~950 ℃,提高气化反应温度和使用水蒸气作为气化介质能显著提高残渣热解焦的气化反应性;采用混合反应模型计算了残渣热解焦的气化反应动力学参数。     

改性生物凝胶对重金属离子的吸附性能研究

以桔子汁加工残渣为原料,制备钙型和氢型生物凝胶作为吸附剂,用于去除水溶液中的重金属离子.结果表明,上述凝胶在水溶液中稳定性较好,对重金属离子的吸附性能优良.钙型凝胶的吸附选择性顺序为:Fe3 ＞Pb2 ＞Cd2 ＞Zn2 ,饱和吸附容量分别为:Pb2 、Cd2 、Zn2 均为约1.1mmol/g、Fe3 为1.5mmol/g;氢型凝胶的吸附选择性顺序为:Pb2 ＞Zn2 ＞Cd2 .钙型凝胶对Fe3 的吸附行为明显不同于氢型凝胶,钙型凝胶以离子交换机理以及Fe3 与Ca2 之间的共沉淀作用为主;而氢型凝胶对Fe3 的吸附则以离子交换机理为主.