Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Some developments in reaction and solution microcalorimetry,with particular reference to its use in biochemistry and cellular biology

The field of isothermal microcalorimetry as applied to systems of interest for aqueous solution chemistry, biochemistry and in cellular biology is briefly reviewed. Some techniques recently developed in the author's laboratory are described.     

探针反应和FTIR法研究Pt与L型沸石的相互作用

探针反应和ＦＴＩＲ法研究Ｐｔ与Ｌ型沸石的相互作用董家禄,朱建华,须沁华,张婕,刘大壮（南京大学化学系,南京,２１０００８）（郑州工学院化工系,郑州,４５０００２）关键词Ｐｔ／Ｌ沸石,沸石催化剂,异丙醇分解反应,Ｐｔ－载体相互作用Ｐｔ的分散度和电子状态...     

Halex reactions of aromatic compounds catalysed by 2-azaallenium, carbophosphazenium, aminophosphonium and diphosphazenium salts: a comparative study

An increasing number of biologically active compounds in the pharma and agro-chemical sector contain carbon fluorine bonds. One of the most common methods to introduce fluorine into intermediates is the well-investigated halogen-exchange reaction, in which chloro- and bromoaromatics activated towards nucleophilic substitution, react with a fluoride source to yield the corresponding fluoroarenes. In general, the reaction is supported by phase-transfer catalysts. The use of a new class of very active phase-transfer catalysts gives the possibility of substituting even halogens with weak activation giving a convenient access to interesting compounds that are not available so far and opening up new synthetic routes in Halex chemistry. Our new classes of catalysts, CNC⁺ (1a), PNC⁺ (2a) and several different approaches presented by other groups are described and experimental results discussed.     

Protection of immobilized sulfhydryl groups against autooxidation by alterations in their microenvironment

Immobilized sulfhydryl groups were prepared by partial thiolation of NH₂-glass beads. The microenvironment of the immobilized SH groups was varied by different chemical modifications of neighboring NH₂ groups. Introduction of a strong charge in the surroundings of immobilized sulfhydryls results in their dramatic stabilization against autooxidation. This effect is due to the salting of O₂ from the surface microlayer of the thiolated beads.     

New aspects of thermal analysis,Part I. Resolution of DSC and means for its optimization

The definitions of the temperature resolution, the so-called resolution of DSC instruments given in literature are discussed. A new definition of the resolution for DSC instruments is presented and outlined. The main characteristic introduced in this new definition is a minimum between two caloric events as a prerequisite of an existing resolution. Possible candidates of test substances have been evaluated. The oligomer n-hexatriacontane is revealing an interesting phenomenon, namely a lambda transition which is in the peak temperature only 2 K lower than the melting temperature of 76°C. The substance was selected as an ideal test substance for the quantification of the resolution of DSC instruments. The lambda transition is a second order process which may reach under certain conditions the saturation of the occurring molecular dislocation within 0.2 K, and after saturation the heat flow rate drops sharply down. Investigations concerning the main characteristics of n-hexatriacontane in respect to the temperatures of transition (lambda transition and melting), to the involved enthalpies, and to the resolution factors were performed as functions of the sample mass and the heating rate. The importance of relevant evaluation procedures increasing the resolution factors of DSC curves are discussed and these procedures are integrated into the testing of the resolution. The necessity for widening the experimental scope from instruments to evaluation procedures is forced by the existence of instruments with built-in signal treatments based on electronic devices and software procedures. A comparison with literature data is outlined for all of the mentioned characteristic values of n-hexatriacontane. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis of protected peptides from the human IgG1 hinge region on PEG support using disulfide bond synthons and alkaline or enzymatic detachment

Peptides from the hinge region of human IgG1 are potential defined carriers of synthetic immunogens. Their synthesis was carried out on the soluble support—PEG-OMe 2000 using disulfide bond synthons. The loading capacity of the polymer was increased twofold by anchoring the lysine as a simple branching unit. The amino acid leucine was used as an enzymatically cleavable linker. Peptide detachment from the polymer was performed either by classical ester bond saponification or newly by peptide bond cleavage catalyzed by thermolysin in water.     

Magnetic behavior of copper diethyldithiocarbamate at low temperatures: A reinvestigation

The title compound, Cu(S₂CNEt₂)₂, behaves at low temperatures (1–20 K) as a normal spin-1/2 molecule, with 〈g〉 =2.06 and the Curie-Weiss θ = +0.25 K. This result contradicts an earlier investigation that led to the suggestion that the crystallographically-occurring dimers are coupled ferromagnetically.     

Vibrational and high pressure conformational studies of 1,1,2-trichloroethane

The infrared spectra of 1,1,2-trichloroethane were recorded from 4000 to 50 cm^?1 in the vapour and liquid states. Additional spectra above 200 cm^?1 of the low temperature crystal and of two crystalline solids, prepared by compressing the sample in a diamond anvil cell, were obtained. Also, infrared spectra of the liquid and of the compound dissolved in CS₂ were recorded at increased pressures. Raman spectral data of the liquid (including polarization measurements) and of the low temperature crystal were obtained.The fundamental frequencies for each of the two conformers, C₁ and C_s, were assigned and the results checked by normal coordinate analysis. The same diagonal and off-diagonal force constants were employed for the two conformers and the force fields were derived by means of a least squares refinement, including data for chloroethane, 1,1-dichloroethane and various deuterated species. A standard deviation of 3 % was obtained in the final fit.From the changes in relative intensities for infrared bands belonging to the C₁ and C_s conformers with increasing pressure, the volume differences (ΔV¯between the conformers were determined in CS₂ solution and in the pure liquid.     

Synthese und Charakterisierung neuer Cyclischer und acyclischer Silachalkogenane mit Disilanyleinheiten

Synthesis and Characterization of New Cyclic and Acyclic Silachalcogenanes with Disilanyl Units Synthesis and properties of (4-CH₃? C₆H₄)₃SiSiH₃, (C₆H₅)₂HSiSiH₂C₆H₅, C₆H₅Cl₂SiSiH₃, (C₆H₅)₂ClSiSiH₃, (H₃SiSiH₂)₂Se, H₃SiSiH₂ESiH₃, , as well as characterisation by IR-, MS-, NMR-spectroscopy are described. Reactions of phenylsubstituted disilanes with HCl in the presence of catalytic amounts of AlCl₃ provide chorinated chlorophenylsubstituted disilanes. Condensation of these chlorodisilanes with disilathiane or disilaselenane yield cyclic and acyclic silachalkogenanes containing disilanyl units. The structure of (C₆H₅)₃SiSiH₃ has been determined by X-ray analysis. The compound crystallizes in space group C2/c with the cell dimensions a = 16.366(2), b = 11.458(1), c = 19.719(2) Å, β = 110.93(1)°.