Synthesis of AN-g-casein copolymer in concentrated aqueous solution of sodium thiocyanate and AN-g-casein fiber's structure and property

The main products of graft copolymerization of acrylonitrile (AN) onto casein in concentrated aqueous solution of sodium thiocyanate in homogeneous phase were characterized as a graft copolymer (AN-g-casein) by Fourier transform infrared. The effects of the monomer concentration, initiator concentration, reaction temperature and reaction time on copolymerization were investigated. The result of WAXD showed that the major part of casein in graft copolymer is amorphous. The SDSC determination showed that the lateral order of PAN, the side chain of copolymer, decreases and the lateral order distribution becomes wider with the increase of the casein component in copolymer. It revealed that the two systems of AN-g-casein copolymer are incompatible by an investigation of DMTA, SEM. The two systems of AN-g-casein exist in separating phases, but tie up each other. So the phenomena of characteristic boundary relaxation occur.Direct spinning of graft copolymer in concentrated aqueous solution of sodium thiocyanate in homogeneous phase was successfully carried out. The skin-core layer structure of AN-g-casein fiber cross-section was observed by scanning electron microscope (SEM). In the core layer, the dimension of phase domain of casein is about from 20 to 60 nm. When the fiber was drawn into broken, microfibrillation occurs, the fiber skin layer is compact, and its broken section is flat. Many long and thin casein strips are formed in the surface of the fiber, respective crystalline grade of two components is scarcely effected by the change of the content of casein. AN-g-casein fibers have good hygroscopicity and dyeability, and more, they can be dyed by acidic dyestuff and cationic dyestuff. AN-g-casein fiber still has good mechanical properties, so AN-g-casein fiber is a new type modified “silk-like” fiber for wide application.     

单扫描示波极谱法测定扑热息痛

扑热息痛与NaNO2在中性介质中发生反应，其亚硝化衍生物具有良好的电活性。在pH9．37的Britton-Robinson缓冲溶液中，于-0．56V(vs．SCE)产生灵敏的极谱还原峰，峰电流与扑热息痛质量浓度在0．007-0．4mg/L范围有良好的线性关系，检测下限为5μg/L。此法已用于测定小儿速效感冒灵。     

十六烷基三甲基溴化铵光度滴定法测定硫酸软骨素钠盐

建立一种测定硫酸软骨素的新方法。十六烷基三甲基溴化铵在KH2 PO4 Na2 HPO4 缓冲溶液中、乳化剂OP共存下与硫酸软骨素反应形成离子对缔合物 ,溶液转变成稳定的乳化液。用光度滴定法测定硫酸软骨素。用标准加入法做回收试验 ,回收率为 99.9%～ 10 0 .2 % ,相对标准偏差0 .32 %～ 0 .4 0 %。方法应用于外贸样品测定 ,结果满意 ,方法准确、简便、快速     

胶束增敏荧光光谱法测定吡哌酸

采用不同表面活性剂对吡哌酸在胶束体系中的荧光性质进行了研究，发现在酸性介质中十二烷基硫酸钠(SDS)对吡哌酸有较强的增敏作用，据此建立了胶束增敏荧光光谱法测定吡哌酸的新方法。方法线性范围为0．07-0．36μg／mL，检出限为0.04μg／mL，平均回收率为98．6％-101．3％，相对标准偏差为1．1％-1．2％。样品测定结果令人满意。     

Single Crystals of NaPrTe2 with LiTiO2‐Type Structure

During attempts to synthesize rare‐earth nitride tellurides black and bead‐shaped single crystals of the title compound sodium praseodymium(III) ditelluride (NaPrTe₂) were obtained as a by‐product by reacting a mixture of praseodymium, sodium azide (NaN₃) and tellurium at 900 °C for seven days in evacuated torch‐sealed silica vessels. NaPrTe₂ crystallizes cubic (space group: Fd3¯m, Z = 16; a = 1285.51(9) pm, V_m = 79.96(1) cm³/mol, R₁ = 0.028 for 146 unique reflections) and exhibits the Na⁺ and Pr³⁺ cations in slightly distorted octahedra of six telluride anions (d(Na—Te) = 325 pm, d(Pr—Te) = 317 pm) each. The main characteristics of this new structure type for alkali‐metal rare‐earth(III) dichalcogenides can be derived from the rock‐salt type structure (NaCl, cubic closest‐packed Te^2— arrangement, all octahedral voids occupied with Na⁺ and Pr³⁺) with alternating layers consisting of Na⁺ and Pr³⁺ cations in a ratio of 3:1 and 1:3, respectively, piled along the [111] direction.     

Darstellung,Charakterisierung und Reaktionsverhalten von Natrium‐ und Kaliumhydridosilylamiden R2(H)Si—N(M)R′ (M = Na,K) — Kristallstruktur von [(Me3C)2(H)Si—N(K)SiMe3]2·THF

Preparation, Characterization and Reaction Behaviour of Sodium and Potassium Hydridosilylamides R₂(H)Si—N(M)R′ (M = Na, K) — Crystal Structure of [(Me₃C)₂(H)Si—N(K)SiMe₃]₂ · THF The alkali metal hydridosilylamides R₂(H)Si—N(M)R′ 1a‐Na — 1d—Na and 1a‐K — 1d‐K ( a : R = Me, R′ = CMe₃; b : R = Me, R′ = SiMe₃; c : R = Me, R′ = Si(H)Me₂; d : R = CMe₃, R′= SiMe₃) have been prepared by reaction of the corresponding hydridosilylamines 1a — 1d with alkali metal M (M = Na, K) in presence of styrene or with alkali metal hydrides MH (M = Na, K). With NaNH₂ in toluene Me₂(H)Si—NHCMe₃ ( 1a ) reacted not under metalation but under nucleophilic substitution of the H(Si) atom to give Me₂(NaNH)Si—NHCMe₃ ( 5 ). In the reaction of Me₂(H)Si—NHSiMe₃ ( 1b ) with NaNH₂ intoluene a mixture of Me₂(NaNH)Si—NHSiMe₃ and Me₂(H)Si—N(Na)SiMe₃ ( 1b‐Na ) was obtained. The hydridosilylamides have been characterized spectroscopically. The spectroscopic data of these amides and of the corresponding lithium derivatives are discussed. The ²⁹Si‐NMR‐chemical shifts and the ²⁹Si—¹H coupling constants of homologous alkali metal hydridosilylamides R₂(H)Si—N(M)R′ (M = Li, Na, K) are depending on the alkali metal. With increasing of the ionic character of the M—N bond M = K > Na > Li the ²⁹Si‐NMR‐signals are shifted upfield and the ²⁹Si—¹H coupling constants except for compounds (Me₃C)(H)Si—N(M)SiMe₃ are decreased. The reaction behaviour of the amides 1a‐Na — 1c‐Na and 1a‐K — 1c‐K was investigated toward chlorotrimethylsilane in tetrahydrofuran (THF) and in n‐pentane. In THF the amides produced just like the analogous lithium amides the corresponding N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2a — 2c ) in high yields. The reaction of the sodium amides with chlorotrimethylsilane in nonpolar solvent n‐pentane produced from 1a‐Na the cyclodisilazane [Me₂Si—NCMe₃]₂ ( 8a ), from 1b‐Na and 1‐Na mixtures of cyclodisilazane [Me₂Si—NR′]₂ ( 8b , 8c ) and N‐silylation product 2b , 2c . In contrast to 1b‐Na and 1c‐Na and to the analogous lithium amides the reaction of 1b‐K and 1c‐K with chlorotrimethylsilane afforded the N‐silylation products Me₂(H)Si—N(SiMe₃)R′ ( 2b , 2c ) in high yields. The amide [(Me₃C)₂(H)Si—N(K)SiMe₃]₂·THF ( 9 ) crystallizes in the space group C2/c with Z = 4. The central part of the molecule is a planar four‐membered K₂N₂ ring. One potassium atom is coordinated by two nitrogen atoms and the other one by two nitrogen atoms and one oxygen atom. Furthermore K···H(Si) and K···CH₃ contacts exist in 9 . The K—N distances in the K₂N₂ ring differ marginally.     

Determination of phosphate in hydroponic nutrient solutions using flow injection potentiometry and a cobalt-wire phosphate ion-selective electrode

The direct flow injection potentiometric (FIP) analysis of phosphate in hydroponic nutrient solution has been carried out using a cobalt-wire ion-selective electrode (ISE). Synthetic hydroponic nutrient solution, commercial hydroponic nutrient solution and working hydroponic farm nutrient solution were analysed for phosphate using the FIP technique. It is shown that FIP results compare favourably to standard methods of analysis such as spectrophotometry and indirect photometric ion-pair chromatography. Reproducible FIP response curves with a slope of −(47.57±0.03) mV per decade and intercept of −(169.7±0.1) mV were obtained for four separate calibrations in the concentration range 5.0×10⁻⁴–1.0×10⁻² M H₂PO₄⁻. Anion corrections for interferences by Cl⁻, NO₃⁻ and SO₄²⁻ were applied to all samples using the selectivity coefficients determined independently using a fixed interference method. Nevertheless, it was found that anion corrections were not necessary, as the deviations fell within the bounds of experimental error for the cobalt-wire ISE technique (i.e.±2–5% R.S.D.). The proposed FIP method enables the direct determination of phosphate in hydroponic nutrient solutions.     

Surface properties of the binary mixed systems of alkylpyridinium halides and sodium alkylsulfonates

Surface properties of the binary mixed systems of decyl- and dodecylpyridinium chloride or bromide and sodium pentyl- and heptylsulfonate have been investigated. The surface tension of solutions of equimolar mixtures of surfactants and individual surfactants was measured, and the composition of mixed monolayers and surface interaction parameter β were calculated with the regular solution theory. Our results indicate that the properties of mixed films depend on both ionic strength and the kind of added inorganic electrolyte. With the increase of inorganic electrolyte concentration, the content of more surface active ions in the adsorption films enhances and is the highest in the presence of NaI and the smallest when solutions contain NaCl. Mutual interactions in mixed adsorbed films were found to be attractive. However, the strength of interaction weakens with the increase of ionic strength and depends on the kind of inorganic ions in the order: Cl⁻>Br⁻>I⁻.     

Comparison of standard capillary and chip separations of sodium dodecylsulfate-protein complexes

Conditions for converting a set of five standard proteins to electrochemically active sodium dodecylsulfate (SDS) complexes were worked out with the aim of using such complexes for conductivity detection with a a chip electrophoresis system. The results obtained were compared with standard capillary electrophoresis (37 cm (effective length 30 cm)×75 μm I.D. capillary, 10 kV, negative polarity at the inlet). The chip separations were run at 500 V per chip (100 V/cm) as compared to the standard capillary arrangement, which was run at 266.6 V/cm. For the capillary set-up the protein complexes were prepared in aqueous solution (Milli-Q water) made 10 mM with respect to SDS. If the SDS concentration was increased to 50 mM, the separation in the capillary was incomplete. On the other hand with the chip system both approaches yielded acceptable results. The chip separations were slightly (but not distinctly) shorter and offered better separations than the standard set-up. The concentration of the surfactant used for the preparation the complexes results in alternations of the elution sequence, which is preserved if the chip separation is used instead of the capillary set-up. Apparently the full capacity of protein–SDS binding is not exploited for the preparation of the adducts.