基于褐藻酸钠-纳米金复合物作非酶标记的新型电化学免疫传感器的研制

比较了用三碘甲状腺氨酸抗体(T3抗体)、褐藻酸钠(AS)标记T3抗体及褐藻酸钠-纳米金复合物(ASN)标记的T3抗体,在通过免疫反应结合到免疫电极表面后,引起的电极表面微环境发生改变的程度;用Fe(CN)3-/4-6为电化学探针,用循环伏安法获取金电极表面微环境改变的电流信息来检测 T3抗体,检测的线性范围为100～1 600ng·ml-1,检出限为45ng·ml-1.     

Background-free,fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes,zincon and ethyl violet

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.     

Conductance studies in amide-water mixtures. II. Sodium salts inN,N-dimethylformamide-water mixtures at 35°C

Conductance data for sodium nitrite, chloride, and acetate in water andN,N-dimethylformamide (DMF)-water mixtures (74.82D42.48) for the concentration range 0.001–0.04N, as well as the densities, viscosities, and dielectric constants of the solvent mixtures at 35°C, are reported. The data have been analyzed by the Fuoss (1975) equation. The existence of a maximum in the viscosity at a 13 mole ratio of DMF and water is indicated. The Walden products for all the three salts pass through a maximum while the equivalent conductances show a minimum with increasing DMF content. The maxima in the Walden product are attributed to the dehydration of ions by the cosolvent (DMF).Part I:Indian J. Chem. 14A, 1015 (1976).Deceased.     

Cu4O12-Baugruppen aus planaren CuO4-Polygonen im Barium-Vanadyl-Oxocuprat(II)-phosphat Ba(VO)Cu4(PO4)4

Cu₄O₁₂ Groups Built of Square Planar CuO₄ Polygones in the Barium Vanadyl Oxocuprate(II) Phosphate Ba(VO)Cu₄(PO₄)₄ Single crystals of Ba(VO)Cu₄(PO₄)₄ have been prepared by solid state reactions just below the melting points of the reaction mixtures of BaP₂O₆, Cu₃(PO₄)₂, CuO, V₂O₅ and V₂O₃ in evacuated closed quartz glas tubes. The compound crystallizes with tetragonal symmetry, Space group D? P42₁2, a = 9.560(2), c = 7.160(2) Å, Z = 2. Special and new features of the crystal structure are to each other isolated Cu₄O₁₂ and (VO)(PO₄)₄ groups. The crystal chemistry of the Cu₄O₁₂ groups is discussed with respect to other compounds containing out of plane connected square planar MO₄ polygones.     

Zwei neue Metatitanate mit fünffach koordiniertem Titan: CsNaTiO3 und RbNaTiO3

Two New Metatitanates with Five-coordinated Titanium: CsNaTiO₃ and RbNaTiO₃ [1] The new oxides CsNaTiO₃ (I) and RbNaTiO₃ (II) are obtained by heating well grounded mixtures of the binary oxides in Ni-tubes as colourless platelike crystals. I: CsO_0.56, NaO_0.48 and TiO₂, Cs:Na:Ti = 1.1:1.1:1.0; 600°C, 61 d as well as CsO_0.97, NaO_0.48 and Ti₂O₃, Cs:Na:Ti = 1.5:3.0:1.0; 760°C, 27 d. II: RbO_0.52, NaO_0.48 and TiO₂, Rb:Na:Ti = 1.1:1.1:1.0; 750°C, 14 d as well as RbO_0.98, NaO_0.48 and Ti₂O₃, Rb:Na:Ti = 1.5:3.1:1.0; 760°C, 27 d. CsNaTiO₃ (orthorhombic, Cmcm) is nearly isostructural with KNaTiO₃ [2]; a = 601.4(1) pm, b = 1 120.3(1) pm, c = 563.4(1) pm (Guinier-Simon-Data, Z = 4). RbNaTiO₃ (monoclinic, C2/c) is isostructural with KNaTiO₃; a = 590.3(1) pm, b = 1 098.4(1) pm, c = 555.1(0) pm, β = 92.15° (Guinier-Simon-Data, Z = 4). Both structures are determined by using four-circle diffractometer data (CsNaTiO₃: Siemens AED2, 2 896I_o(hkl), MoKα , R = 2.4%, R_w = 2.3%; RbNaTiO₃: Philips PW 1 100, 2 743I_o(hkl), AgKα , R = 9.9%, R_w = 8.9%; additional data see text). The Madelung Part of Lattice Energy (MAPLE), Effective Coordination Numbers (ECoN), Mean Fictive Ionic Radii (MEFIR) and the Charge Distribution in Solids are calculated and discussed.     

Microemulsion photopolymerization of methacrylates stabilized with sodium dodecyl sulfate and poly(N-acetylethylenimine) macromonomers

Methyl methacrylate and butyl methacrylate were polymerized in oil-in-water microemulsions that were stabilized by sodium dodecyl sulphate (SDS). A poly(N-acetylethylenimine) (PNAEI) macromer was also included in the recipe, as a cosurfactant and a comonomer. Polymerizations were initiated by UV-irradiation. The average diameters of latex particles, obtained by STM, were in the range of 17-200 nm. The experimental data evidenced that the particle size was mainly dependent on the SDS/PNAEI ratio. Polymerization yields were around 75-85%. The synthesized copolymers have viscosity average molecular weights in the range of 2.1-2.4×10⁶ and glass transition temperatures of 38.0-43.5°C, lower than those obtained without using PNAEI. The investigation by means of FTIR and 1H-NMR techniques revealed that PNAEI was incorporated into the nanoparticles.     

Studies of sodium humate/polyacrylamide/clay hybrid hydrogels. I. Swelling and rheological properties of hydrogels

A type of novel hybrid hydrogels from sodium humate (SH), polyacrylamide (PAM), and hydrophilic Laponite clay were prepared using potassium persulfate (KPS) as the initiator and N,N′-methylenebisacrylamide (MBA) as the cross-linker. The structures of the hydrogels were characterized by field emission scanning electron microscope and FTIR. Their swelling properties, swelling mechanism and rheological properties were also investigated. Experiments show that the composite is heterogeneous in the PAM/SH hydrogel system, while the clay collaborates with SH and improves the network structure of PAM/SH/clay hydrogel. High water-absorbing capability is shown for both hydrogel systems. Han plot proves that clay and SH are compatible with PAM for PAM/SH/clay hydrogels.     

The solvation of Li and Na in acetonitrile from ab initio-derived many-body ion–solvent potentials

Several Li⁺- and Na⁺-acetonitrile models were derived from ab initio calculations at the counterpoise-corrected MP2/TZV++(d,p) level for distorted ion-(MeCN)_n clusters with n=1, 4 and 6. Two different many-body ion-acetonitrile models were constructed: an effective three-body potential for use with the six-site effective pair model of Böhm et al., and an effective polarizable many-body model. The polarizable acetonitrile model used in the latter model is a new empirical model which was also derived in the present paper. Mainly for comparative purposes, two ion-acetonitrile pair potentials were also constructed from the ab initio cluster calculations: one pure pair potential and one effective pair potential. Using all these potential models, MD simulations in the NPT ensemble were performed for the pure acetonitrile liquid and for Li⁺(MeCN) and Na⁺(MeCN) solutions with 1 ion in 512 solvent molecules and with a simulation time of at least 120 ps per system. Thermodynamic properties, solvation-shell structure and the self-diffusion coefficient of the ions and of the solvent molecules were calculated and compared between the different models and with experimental data, where available. The Li⁺ ion is found to be four-coordinated when the new many-body potentials are used, in contrast to the six-coordinated structure obtained for the pure pair and effective pair potentials. The coordination number of Na⁺ is close to six for all the models derived here, although the coordination number becomes slightly smaller with the many-body potentials. For both ions, the solvent molecules in the first shell point their nitrogen ends towards the cation, while in the second shell the opposite orientation is the most common.     

Prescriptions and Ingredients for Controlled CC Bond Formation with Organometallic Reagents. New synthetic methods (5)

Merits and drawbacks of known carbon-carbon linking procedures are outlined. Two novel methods are discussed in some detail: the copper-catalyzed alkylation of Grignard reagents and reactions with allylpotassium compounds. Both methods provide a very efficient access to saturated, unsaturated, as well as functionally substituted hydrocarbons and moreover permit an astonishing degree of regio- and stereoselective control of olefin synthesis.     

An easy preparation of per- and poly-fluoroalkyl propenyl sulfones

Sodium tridecafluorohexanesulfinate (1a) and sodium 1-chloro-2,2,2-trifluoroethanesulfinate (1b) were prepared by the treatment of 1-iodo-tridecafluorohexane and 1-bromo-1-chloro-2,2,2-trifluoroethane with sodium dithionite in a water-acetonitrile solution. Prolonged reaction of 1a with allyl bromide in DMF afforded tridecafluorohexane 1-propenyl sulfone 2 as the only product in good yield. A similar treatment of 1b gave exclusively 1-chloro-2,2,2-trifluoroethane 3-propenyl sulfone 4. Bromination of 4 followed by dehydrobromination with Et₃N resulted in a mixture of 1-chloro-2,2,2-trifluoroethane 3-bromo-1-propenyl sulfone 6 and 1-chloro-2,2,2-trifluoroethane 2-bromo-3-propenyl sulfone 7, while dehydrobromination with pyridine gave sulfone 6 practically as the only product. α,β-Unsaturated sulfones 2 and 6 were shown to be active dienophiles.