Formation Thermodynamics of Binary and Ternary Lanthanide(III) Complexes with 1,10-Phenanthroline and Chloride in N,N-Dimethylformamide

Formation thermodynamics of binary and ternary lanthanide(III) (Ln = La, Ce, Nd, Eu, Gd, Dy, Tm, Lu) complexes with 1,10-phenanthroline (phen) and the chloride ion have been studied by titration calorimetry and spectrophotometry in N,N-dimethyl-formamide (DMF) containing 0.2 mol-dm^–3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25°C. In the binary system with 1,10-phenanthroline, the Ln(phen)³⁺ complex is formed for all the lanthanide(III) ions examined. The reaction enthalpy and entropy values for the formation of Ln(phen)³⁺ decrease in the order La > Ce > Nd, then increase in the order Nd < Eu < Gd < Dy, and again decrease in the order Dy > Tm > Lu. The variation is explained in terms of the coordination structure of Ln(phen)³⁺ that changes from eight to seven coordination with decreasing ionic radius of the metal ion. In the ternary Ln³⁺-Cl^–-phen system, the formation of LnCl(phen)²⁺, LnCl₂(phen)⁺, and LnCl₃(phen) was established for cerium(III), neodymium(III), and thulium(III), and their formation constants, enthalpies, and entropies were obtained. The enthalpy and entropy values are also discussed from the structural point of view.     

芥子气纯度测定不确定度分析与评定

采用酸碱滴定法测定芥子气纯度,对测量结果的不确定度进行评定。分析了测定过程中不确定度来源,包括滴定剂的标定、消耗滴定剂体积、样品称量等引入的不确定度及其计算方法,最后合成得到标准不确定度。当芥子气纯度测定结果为94.78%时,扩展不确定度为0.34%(k=2)。实验结果表明,样品称量引入的不确定度对测量结果的影响最大。     

Preparation and Superconductivity of a Series of Bi2CaSr2-XBaxCu2O8+δ

By means of the addition of Ba into the Bi-Ca-Sr-Cu-O 2122 system, a series of Bi₂CaSr_2-xBa_xCu₂O_8+δ (0 ≤ × ≤ 2) quinary metal oxides were prepared by the citrate route and by the conventional powder reaction method. The samples prepared by the former method have better properties than the latter. It was found that 5 was not equal to zero for all of them and that it increased with decreasing Tc. Two phases were indentified in the oxides containing all five metal elements. One is the Bi-Ca-Sr-Cu-O 2122 phase, the other is a new insulating phase which probably contains Bi-Ca-Ba-Cu-O with undetermined stoichiometry. Superconductivity was found in those samples for which × ≤ 1.50 with their Tc onsets between 93–78 K by resistivity measurements. Superconductivity decreased monotonically with increasing x. However, residual resistance was found in those samples for which 1.00 ≤ × ≤ 1.50, The Meissner effect appears in the samples where × ≤ 1.00 with Tc onsets between 88–80 K. For x = 1.75 and 2.00, the samples were semiconductors with resistivities of 6.66 × 10² and 6.96 × 10³ Ω cm at 290 K, and activation energies of 0.109, and 0.298 eV, respectively.     

Correlation between Solution and the Solid State: The pH Dependent Composition in the Ternary System [Co(H2O)6]2+ or [Ni(H2O)6]2+/Piperazine/Phosphate

The protolytic equilibria of piperazine (C₄H₁₀N₂) and phosphate have been investigated in the presence of cobalt or nickel chloride or nitrate by potentiometric titrations between pH 2 and 8. Potentiometric titrations suggest the presence of [M²⁺(H₂O)₅(C₄H₁₁N₂⁺)]³⁺ and [M²⁺(H₂O)₅(C₄H₁₀N₂)]²⁺ in solution with stability constants logK of 3.1 and 3.8 for M = Co and 3.1 and 3.6 for M = Ni, respectively. Crystallization experiments were then conducted at selected pH values to isolate desired species from the known solution composition. Crystallization afforded [M(H₂O)₆]²⁺(C₄H₁₂N₂²⁺)(HPO₄^2—)₂ at pH 3.5 and 6.2 (M = Co, Ni), and Co₃(PO₄)₂·8H₂O at pH 10.5. No crystals with the dihydrogenphosphate anion or a metal‐bound piperazine ligand could be isolated under the reaction conditions. The solid‐state assembly in the isomorphous structures of [M(H₂O)₆](C₄H₁₂N₂)(HPO₄)₂ with M = Co and Ni is based on an extended hydrogen bonded network between the three ionic building blocks.     

Redox-iodometry: a new potentiometric method

A new iodometric method for quantifying aqueous solutions of iodide-oxidizing and iodine-reducing substances, as well as plain iodine/iodide solutions, is presented. It is based on the redox potential of said solutions after reaction with iodide (or iodine) of known initial concentration. Calibration of the system and calculations of unknown concentrations was performed on the basis of developed algorithms and simple GWBASIC-programs. The method is distinguished by a short analysis time (2–3 min) and a simple instrumentation consisting of pH/mV meter, platinum and reference electrodes. In general the feasible concentration range encompasses 0.1 to 10^–6 mol/L, although it goes down to 10^–8 mol/L (0.001 mg Cl₂/L) for oxidants like active chlorine compounds. The calculated imprecision and inaccuracy of the method were found to be 0.4–0.9% and 0.3–0.8%, respectively, resulting in a total error of 0.5–1.2%. Based on the experiments, average imprecisions of 1.0–1.5% at c(Ox)>10^–5 M, 1.5–3% at 10^–5 to 10^–7 M, and 4–7% at <10^–7 M were found. Redox-iodometry is a simple, precise, and time-saving substitute for the more laborious and expensive iodometric titration method, which, like other well-established colorimetric procedures, is clearly outbalanced at low concentrations; this underlines the practical importance of redox-iodometry.

---

An erratum to this article is available at .     

The effects of increasing NaCl concentration on the stability of inclusion complexes in aqueous solution

Equilibrium constants and standard molar enthalpies of reaction were determined by titration calorimetry for the reaction of 1-butanol with 2-hydroxypropyl-b-cyclodextrin (HP-b-CD) in aqueous solution at different concentrations of NaCl (0-1.9 M). The standard molar free energy and entropy changes associated to the complexation were calculated from the corresponding equilibrium constants, K, and standard enthalpies determined experimentally. In NaCl solutions the inclusion complexes ButOH/HP-b-CD are more stable than in water and their stability increases at increasing NaCl concentration; otherwise, the standard molar enthalpy associated to the formation of the complexes does not change with the increasing of salt concentration. The dependence of K on NaCl concentration were used to evaluate the number of water molecules displaced from the hydration shells of HP-b-CD and ButOH in forming complexes. This revised version was published online in July 2006 with corrections to the Cover Date.     

Spectroscopy, NMR and DFT studies on molecular recognition of crown ether bridged chiral heterotrinuclear salen Zn(II) complex

A barium-containing crown ether bridged chiral heterotrinuclear salen Zn(II) complex BaZn2L(ClO4)2, where L is a folded dinuclear chiral (R,R)-salen ligand, has been synthesized and characterized by elemental analysis, 1H NMR, UV-vis, IR, circular dichroism (CD) spectra, and mass spectra. As a folded dinuclear chiral host, its recognition with achiral guests (imidazole derivatives), rigid bidentate guest (1,4-diazobicyclo[2,2,2]octane, DABCO) and chiral guests (amino acid methyl esters) was investigated by means of UV-vis spectrophotometric titration, CD spectra. The association constants of D-amino acid methyl esters are found to be higher than those of their L-enantiomer. The sandwich-type binding of BaZn2L(ClO4)2-DABCO supramolecular assembly was specially studied via 1H NMR titration and 1H ROESY. To understand the recognition on molecular level, density functional theory (DFT) calculations on B3LYP/LanL2DZ were performed on the minimal energy conformations of host, guests, and host-guest complexes. The minimal energy conformations were obtained by molecular mechanics (MM) optimization and molecular dynamics (MD) simulation. The results of single point energy, HOMO energy, and charges transfer were analyzed. The results of theoretical calculations are in good agreement with the experimental data.     

Determination of the Dissociation Constants of Urocanic Acid Isomers in Aqueous Solutions

Summary. (E)- and (Z)-Urocanic acids are endogenous chemicals in the normal mammalian skin. The first and the second thermodynamic dissociation constants (pK _a1 and pK _a2) of urocanic acid isomers were determined using UV spectrophotometry in aqueous solutions. The values with standard deviation (pK _a1 = 3.43 ± 0.12 and pK _a2 = 5.80 ± 0.04) and (pK _a1 = 2.7 ± 0.3 and pK _a2 = 6.65 ± 0.04) were obtained to (E)- and (Z)-urocanic acids, respectively. The second dissociations were studied also by potentiometric titration in aqueous sodium chloride solutions up to the isotonic salt concentration (0.154 mol dm⁻³), and the second thermodynamic dissociation constants as well as activity parameters for both isomers were determined at temperature 25°C and for (E)-urocanic acid also at 37°C. The obtained pK _a2 values were close to those found by UV spectrophotometry. The equations for the calculation of the second stoichiometric dissociation constants of urocanic acid isomers on molality and molarity scale in aqueous sodium chloride solutions were derived. The obtained pK _a1 and pK _a2 values for (Z)-urocanic acid appear to be essentially lower than some previously reported values in literature. An erratum to this article is available at .     

单氧代-二硒烷基-1, w-二氧取代杯[4]衍生物的合成,结构及萃取性能研究

Novel macrocyclic monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a were synthesized by the reaction of calix[4]arene dibromides 1-5 with the disodium salt of bis（2-selenylethyl）ether in the yields between 28% and 64%. Their structures were characterized by proton and carbon NMR spectra. X-Ray structure analysis of la further confirmed the cone conformation of compounds 1a-5a. An interesting host-guest complex of la with dichloromethane via CH/π and C1/π interactions was elucidated. Extraction experiments showed that these novel monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a had strong extraction ability towards mercury ion. The interaction of Hg^2＋with the calix ligand has also been investigated by 1^H NMR titration.     

A novel and simple pathway to synthesis of porous polyurea absorbent and its tests on dye adsorption and desorption

A novel one-step protocol for the preparation of porous polyurea material (PPU) through precipitation polymerization of toluene diisocynate (TDI) is presented. The process is based on step polymerization of one singlemonomer, TDI, with water in water-acetonemixed solvent. PPU is obtained without need for any porogen or additives, and no any chemical modification on the outcome polymer is necessary. The morphology, pore size and size distribution of PPU are characterized by scanning electron microscope and BET nitrogen adsorption. Taking acid fuchsine (AF) and Congo Red as dye examples in wastewaters, their adsorption on, desorption from PPU and the reusability of PPU were tested. Experimental conditions for AF adsorption were optimized with regard to pH, adsorption time, AF concentration and amount of PPU. Results demonstrate that the as-prepared PPU is of high performance in dyes adsorption and recycled use. This work presents therefore a novel and attractive candidate for removal of anionic dyes from wastewaters.