Cathodic Stripping Determination of Water in Organic Solvents

A cathodic stripping voltammetry (CSV) method has been developed to determine water content in organic solvents based on electrooxidation of a gold electrode in the presence of water to form gold oxides upon anodic polarizations. Following cathodic potential scan, a sharp reductive stripping peak of gold oxides is generated and the magnitude of the peak current is related to the water content in the organic solvents. The method has been applied for determination of water in four commonly used water miscible organic solvents, acetonitrile, tetrahydrofuran, acetone and glacial acetic acid, with limits of detection of 60, 10, 40 and 10 ppm, respectively.     

Isothermal Titration Calorimetry Study of a Bistable Supramolecular System: Reversible Complexation of Cryptand[2.2.2] with Potassium Ions

Isothermal titration calorimetry (ITC) is used to investigate the thermodynamics of the complexation of potassium ions by 1,10‐diaza‐4,7,13,16,21,24‐hexaoxabicyclo[8.8.8]hexacosane (cryptand[2.2.2]) in aqueous solution. By changing the pH of the solution it was possible to trigger the reversible complexation/decomplexation of the cryptand in consecutive in situ experiments and to assess for the first time the use of ITC to monitor the thermodynamics of a bistable system.     

关于一元酸准确滴定判据的商榷

化学分析教科书中给出的弱酸能被准确滴定的条件是cKa≥1.0×10-8。本文根据这一判据的来源(滴定突跃≥0.3pH单位),对一元酸体系的滴定情况进行了严格数学处理。计算结果表明,只有同时满足弱酸的浓度c1.0×10-3mol/L和cKa≥1.0×10-8条件下,弱酸才能被准确滴定。对于浓度极稀的酸溶液(c≤1.4×10-4mol/L),无论强酸还是弱酸都不能被准确滴定。对教材很少涉及的不同浓度酸碱互相滴定的情况也给出了有价值的结论。     

High Na+ Mobility in rGO Wrapped High Aspect Ratio 1D SbSe Nano Structure Renders Better Electrochemical Na+ Battery Performance

We chose to understand the cyclic instability and rate instability issues in the promising class of Na⁺ conversion and alloying anodes with Sb₂Se₃ as a typical example. We employ a synthetic strategy that ensures efficient rGO (reduced graphene oxide) wrapping over Sb₂Se₃ material. By utilization of the minimum weight of additive (5 wt.% of rGO), we achieved a commendable performance with a reversible capacity of 550 mAh g⁻¹ at a specific current of 100 mA g⁻¹ and an impressive rate performance with 100 % capacity retention after high current cycling involving a 2 Ag⁻¹ intermediate current step. The electrochemical galvanostatic intermittent titration technique (GITT) has been employed for the first time to draw a rationale between the enhanced performance and the increased mobility in the rGO wrapped composite (Sb₂Se₃-rGO) compared to bare Sb₂Se₃. GITT analysis reveals higher Na⁺ diffusion coefficients (approx. 30 fold higher) in the case of Sb₂Se₃-rGO as compared to bare Sb₂Se₃ throughout the operating voltage window. For Sb₂Se₃-rGO the diffusion coefficients in the range of 8.0×10⁻¹⁵ cm² s⁻¹ to 2.2×10⁻¹² cm² s⁻¹ were observed, while in case of bare Sb₂Se₃ the diffusion coefficients in the range of 1.6×10⁻¹⁵ cm² s⁻¹ to 9.4×10⁻¹⁵ cm² s⁻¹ were observed.     

“Titration” polymerization of monovinylacetylene

A polymer consisting of a saturated carbon backbone with pendent acetylenic groups was prepared from monovinylacetylene. A titration was performed between the monomer and tertiary butyllithium, its lithiating agent. The charge transfer complex formed between the solvent THF and the tertiary butyllithium was used as an indicator of the unreacted butyllithium. Hence, a stoichiometric quantity of tertiary butyllithium was added dropwise to a solution of monovinylacetylene in THF to form lithiovinylacetylene. The addition of a slight excess of butyllithium led to the polymerization of the lithiated monomer. The obtained polymer was reprotonated and characterized. This polymerization was evaluated as a possible route to synthesize poly(vinylacetylene) with processable molecular weights, for its application as a potential carbon fiber precursor. © 1996 John Wiley & Sons, Inc.     

计算滴定分析法的分类及其进展

提出了将计算滴定分析法分为控制体积滴定法和控制电位滴定法两个大类的观点。控制体积滴定法包括线性滴定法、单点滴定法及双点滴定法;控制电位滴定法包括控制单电位滴定法和控制多电位滴定法。本文介绍了两类计算滴定分析法的基本原理、方法特点、相互联系、引起误差的原因及其最新进展。     

Use of solid electrolyte GeSe-GeI<Subscript>2</Subscript> for electrochemical doping with germanium

Lead tellurite is study to show that solid electrolyte GeSe-GeI₂, which has the optimum composition and contains 5 mol % of GeI₂, can in principle be used for electrochemical doping of semiconducting materials with germanium by the coulometric titration method. Some parameters of the coulometric titration are considered. The doping efficiency is monitored by determining variations in the concentration of charge carriers using the Hall method and by measuring the EMF of corresponding galvanic cells.     

乙酸中沉淀聚合制备窄分散聚二乙烯基苯微球

在沉淀聚合中利用含无毒的乙酸溶剂合成出窄分散交联聚二乙烯基苯(PDVB-55)微球,用扫描电镜(SEM)对其表面形态和粒度进行了表征,结果显示PDVB-55微球均匀且互相分离,平均粒径是2.69μm.X射线光电能谱(XPS)分析表面化学组成显示,微球表面有大量残余双键.     

示波电位滴定法测定僵蚕中草酸铵

以高锰酸钾为滴定剂，用示波器指示终点，提出了在酸性介质中直接测定僵蚕中活性草酸铵的示范波电位滴定方法，该法灵敏度高（可指示８×１０＾－７ｍｏｌ．Ｌ＾－１ＫＭｎＯ４的浓度变化），精密度好（ＲＳＤ＝０．０６％），简便快速，且不受颜色及混浊等干扰，用于中，日，欧等多国僵蚕品种中草酸铵的直接测定，结果与氯化钙沉淀重量法相差－０．２２～０．７８％。     

花椰菜状碳酸钙的"一步法"制备及表征

以碱土金属锶的硝酸盐为添加剂, 采用“一步法”制备了大小均一、 分散性良好的花椰菜状碳酸钙粒子. 考察了反应温度、 反应时间等因素对碳酸钙结晶行为的影响, 确定了最佳反应条件. 利用扫描电子显微镜(SEM)、 X射线衍射仪(XRD)、 X射线能谱仪(EDAX)等对所得产物的结构和性能进行了表征, 并探讨了其反应原理.