无机与有机混合物的含量分析——以探究鼻可乐成分为例

在化学实验课堂上,以生活中常见药品作为实验对象更能激发起学生对化学学习的兴趣。鼻可乐是一种常见的市售洗鼻剂,主要成分为氯化钠、柠檬酸与柠檬酸钠,是一种典型的无机物与有机物的混合体系。本文设计了对鼻可乐的组成进行定量分析的方法,并且通过实验验证其合理性,以期为鼻可乐成分分析实验进入高校分析化学实验课堂提供指导方法。学生通过该实验不仅能掌握恒重坩埚、沉淀滴定等实验基本操作方法,而且能更好地理解定量分析数据的方法。     

Facile synthesis and characterization of β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide as novel nanocomposites for efficient photocatalytic degradation of methylene blue dye

In this paper, our research team has synthesized new nanocomposites by simple precipitation/ignition method and using low-cost chemicals. Hence, β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide new nanocomposites were synthesized by precipitation of Mn(II)/Co(II)/Cu(II) solution using sodium hydroxide and ignition of precipitate at 700 °C for 3 hrs, respectively. The synthesized nanocomposites were characterized using different instruments such as energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), nitrogen gas sorption analyzer, and UV–vis spectrophotometer. Energy dispersive X-ray analysis revealed that the nanocomposite formed as a result of precipitation consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.73, 27.01, 17.26, and 24 %, respectively. Also, the nanocomposite formed as a result of ignition consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.26, 23.87, 14.56, and 30.31 %, respectively. Transmission electron microscope revealed that the nanocomposites formed as a result of precipitation and ignition consist of polyhedral and spherical shapes with an average diameter of 34.50 and 28.56 nm, respectively. The synthesized nanocomposites were used as new photocatalysts for the efficient degradation of methylene blue dye. 0.05 g of the synthesized nanocomposites degrade 100 % of 50 mL of 15 mg/L of methylene blue dye solution within 25 min in the presence of H₂O₂ under UV light.     

Acrylation of biomass: A review of synthesis process: Know-how and future application directions

Over the years, eco-friendly raw biomass is being investigated to develop novel green monomer and oligomer components for sustainable polymer materials synthesis. The use of naturally obtained biomass can reduce the dependence on petrochemical suppliers and the impact of petroleum prices. Polymer materials obtained from biomass are a competitive alternative comparing with those made from petrochemicals. Domestically and industrially used vegetable oil derivatives are considered widely available, while cellulose derivatives are the most abundant natural polymers. Biobased acrylic polymers developed from vegetable oils and cellulose are very popular nowadays. Using acrylic derivatives of vegetable oils and cellulose as naturally obtained materials leads to long-lasting biopolymers with a wide range of high exploitation properties and applications. The characteristics of vegetable oil- and cellulose-based acrylate resins of high-biorenewable carbon content are suitable for industrial application, while their role is still underestimated. A brief analysis of biomass-derived biopolymer resin compositions, properties, and applications is critically outlined herein.     

Copolymeric nano/microgels of N-isopropylacrylamide and carboxyalkyl methacrylamides: Effect of methylene chains and the ionization state of the weak acids on size and sensitivity to pH and temperature

ABSTRACT

We prepared nano/microgels by precipitation copolymerization of N-isopropylacrylamide (NIPAAm), and one of three different carboxyalkyl methacrylamides [methacryloylamido hexanoic acid (M₅), 8-methacryloylamido octanoic acid (M₇), and 11-methacryloylamido undecanoic acid (M₁₀)], either in the acid forms or as carboxylates (potassium salts). The hydrodynamic diameter (Dh) of the nano/microgels prepared with the carboxylates was smaller (≈100 nm for M₁₀ copolymers), compared to the size of homopolymeric NIPAAm microgels prepared by dispersion polymerization (around 600 nm), indicating that the carboxylates act as surfactants reducing the size of the seeds during the polymerization process. These materials presented a swollen-shrunken transition temperature (T _tr) similar to the T _tr of the homopolymeric NIPAAm microgels, without pH sensitivity. On the other hand, the copolymeric microgels prepared from the acid form of the comonomers have a similar or bigger size than NIPAAm microgels. For these copolymers, the T _tr can be tuned by the type and proportion of acid comonomer used and present pH sensitivity. This is important for biomedical applications such as positive temperature control release. Polyelectrolyte titration demonstrates that the nano/microgels prepared with the carboxylates behave as hard spheres, while the microgels prepared with the weak acid behave as porous materials.     

Improved performance of porous LiFePO4/C as lithium battery cathode processed by high energy milling comparison with conventional ball milling

Porous LiFePO₄ is synthesized and coated with amorphous carbon by using high energy nano-mill (HENM) processed solid-state reaction method. FeCl₃ (38%) containing water solution which is originated from pickling of steel scrap (waste liquid) is used as a source material in this study. The result indicates that LiFePO₄ powders are well coated with the amorphous carbon. HENM process successfully produces the porous LiFePO₄ with homogeneously distributed pores and a well networked carbon web, which delivers an enhanced electrochemical rate capability. HENM process is incorporated as an effective route for reducing particle size, distributing particle homogeneously and averting agglomeration of particles of precursor in this study. X-ray diffraction, scanning electron microscopy with elemental mapping, transmission electron microscopy with selected area (electron) diffraction, Raman spectroscopy, cyclic voltammetry, and galvanostatic charge/discharge are employed to characterize the final product. Electrochemical measurement shows that the synthesized LiFePO₄/C composite cathode delivers an initial discharge capacity of 161 mAhg⁻¹ at 0.1C-rate between 4.2 and 2.5 V. Remarkably, the cathode delivers 101.9 mAhg⁻¹ at high charge/discharge rate (10 C).     

Preparation of ABA triblock copolymer assemblies through “one-pot” RAFT PISA

Poly(N,N-dimethyl acrylamide)-block-poly(styrene)-block-poly(N,N-dimethyl acrylamide)(PDMAc-bPSt-b-PDMAc) amphiphilic triblock copolymer micro/nano-objects were synthesized through reversible addition-fragmentation chain transfer(RAFT) dispersion polymerization of St mediated with poly(N,Ndimethyl acrylamide) trithiocarbonate(PDMAc-TTC-PDMAc) bi-functional macromolecular RAFT agent.It is found that the morphology of the PDMAc-b-PSt-b-PDMAc copolymer micro/nano-objects like spheres,vesicles and vesicle with hexagonally packed hollow hoops(HHHs) wall can be tuned by changing the solvent composition.In addition,vesicles with two sizes(600 nm,264 nm) and vesicles with HHHs features were also synthesized in high solid content systems(30 wt% and 40 wt%,respectively).Besides,as compared with typical AB diblock copolymers(A is the solvophilic,stabilizer block,and B is the solvophobic block),ABA triblock copolymers tend to form higher order morphologies,such as vesicles,under similar conditions.The finding of this study provides a new and robust approach to prepare block copolymer vesicles and other higher order micelles with special structure via PISA.     

原位沉析法制备磁性氧化铁羟基磷灰石/壳聚糖棒材

首先通过化学沉淀法制备磁性氧化铁羟基磷灰石(Fe3O4/HA),然后以壳聚糖(CS)为基体,利用原位沉析法将Fe3O4/HA与CS复合,制得磁性Fe3O4/HA/CS复合材料.经XRD、粒径分布和PPMS测试,结果表明了Fe3O4/HA复合物的生成.系统研究了磁性Fe3O4/HA/CS棒材力学性能的影响因素,最终确定Fe3O4与HA质量比为3∶17,磁性Fe3O4/HA与CS质量比为9∶91时,棒材的力学性能最优,弯曲强度可达到87.0 MPa,弯曲模量1.57 GPa.     

沉淀法制备EPDM-g-MAH/CaCO_3复合材料及其性能的表征

提供了三元乙丙橡胶(EPDM)交联的一种方法.以二甲苯为溶剂,溶液法制备马来酸酐(MAH)接枝EPDM,然后向溶液中加入适量碳酸钙(CaCO3),与已接枝的马来酸酐(MAH)反应.待反应完全后,滴加丙酮作为沉淀剂,沉淀物真空干燥,制得EPDM-g-MAH/CaCO3弹性体复合材料.溶解、溶胀及拉伸性能测试结果表明,复合材料样品已形成有效的交联,且材料的抗张强度、断裂伸长率和模量均得到较大幅度的提高,当CaCO3含量达到体系总重的20%时,复合材料呈现最佳力学性能.上述实验结果是因为碱性的CaCO3的Ca2+可以与接枝在EPDM上的MAH发生配合反应,进而成为EPDM的交联中心,形成有效交联,从而促进了EPDM机械性能的提高,ATR-FTIR和TGA的测试结果被用于证实上述观点.     

Cr/MCM-41催化剂上的乙烯聚合行为

以纯硅ＭＣＭ４１为载体，负载Ｐｈｉｌｉｐｓ烯烃聚合催化剂活性组分Ｃｒ．ＸＲＤ及ＴＥＭ表征结果表明，所得到的Ｃｒ／ＭＣＭ４１催化剂具有良好的晶体结构和较理想的长程有序一维孔道．ＦＴＩＲ和Ｒａｍａｎ光谱表征结果表明，Ｃｒ／ＭＣＭ４１上不仅可发生乙烯聚合过程，而且形成的聚乙烯以结晶和无定形两种形态存在．乙烯聚合活性不仅与反应参数有关，而且与Ｃｒ的负载量密切相关．用于乙烯聚合后，Ｃｒ／ＭＣＭ４１催化剂仍保持其特征的晶体结构和一维孔道结构．     

Investigation of polynuclear Zr(IV) hydroxide complexes by nanoelectrospray mass-spectrometry combined with XAFS

Polynuclear species of zirconium in acidic aqueous solution are investigated by combining X-ray absorption spectroscopy (XAFS) and nanoelectrospray mass spectrometry (ESI-MS). Species distributions are measured between pH_C 0 and pH_C 3 for [Zr] = 1.5–10 mM. While the monomer remains a minor species, with increasing pH the degree of polymerization increases and the formation of tetramers, pentamers, octamers, and larger polymers is observed. The high resolution of the mass spectrometer permits the unambiguous determination of polynuclear zirconium hydroxide complexes by means of their isotopic patterns. The relative abundances of mononuclear and polynuclear species present simultaneously in solution are measured, even if one of the species contributes only 0.1% of the Zr concentration. For the first time it has been directly observed that the hydrolysis of polynuclear Zr species is a continuous process which leads to charge compensation through the sequential substitution of water molecules by hydroxide ligands until doubly charged polymers dominate at conditions (H⁺ and Zr concentrations) close to the solubility of Zr(OH)₄(am). The invasiveness of the electrospray process was minimized by using very mild declustering conditions, leaving the polynuclear species within a solvent shell of approximately 20 water molecules. Figure Schematic Diagram of Multiplexed Measurement of 9 Anti-Nuclear Antibodies Using the AtheNa Multilyte Assay