Optimization of the process parameters of synthesis of vinblastine imprinted polymer

Molecularly imprinted polymers (MIPs) are tailor-made polymers with high selectivity for the template molecule. This selectivity arises from the synthetic procedure followed to prepare the MIP. In this work, the influence of process parameters on the preparation of vinblastine (VLB) imprinted polymers was presented. In the procedure of polymerization, VLB (0.1 mmol) was used as the template molecule and a commonly used initiator, azobisisobutyronitrile (AIBN), was employed to initiate the reaction at 60 °C. The influence of the following parameters was investigated: the moles of functional monomer (MAA, 0.3-1.0 mmol), the moles of cross-linker (EDMA, 1.5-5.0 mmol) and the porogenic solvent (toluene or acetonitrile). A mathematical method of uniform design was applied to optimize these selected parameters in order to increase the selectivity of MIP for template molecule. The experimental data were analyzed to obtain the regression model and the optimal conditions were achieved by optimization with uniform design software. The MIP was synthesized under the optimal conditions that 1.0 mmol of MAA and 5.0 mmol of EDMA copolymerized in toluene in the presence of 0.1 mmol of VLB. After removal of the template molecule, the obtained MIP was then employed as the sorbents of solid-phase extraction (SPE) to separate VLB from Catharanthus roseus extract. The results showed that the polymer exhibited high affinity to the template molecule and could separate and enrich VLB from C. roseus extract effectively. The recovery of VLB on the optimal MIP was 89.00%, which agreed closely with the predicted recovery. Therefore it is possible to further improve the nature of the polymer by optimizing the polymerization parameters with the method of uniform design.     

Evaluation of new selective molecularly imprinted polymers prepared by precipitation polymerisation for the extraction of phenylurea herbicides

Three different molecularly imprinted polymers (MIPs) have been prepared by precipitation polymerisation using linuron (LIN) or isoproturon (IPN) (phenylurea herbicides) as templates and methacrylic acid (MAA) or trifluormethacrylic acid (TFMAA) as functional monomers. The ability of the different polymers to selectively rebind not only the template but also other phenylurea herbicides has been evaluated. In parallel, the influence of the different templates and functional monomers used during polymers synthesis on the performance of the obtained MIPs was also studied through different rebinding experiments. The experimental binding isotherms were fitted to the Langmuir-Freundlich isotherm allowing to describe the kind of binding sites present in the imprinted polymers under study. It was concluded that TFMAA-based polymer using IPN as template presents the best properties to be used as a selective sorbent for the extraction of phenylurea herbicides.     

Material transport between the atmosphere and sediment of the Lake Balaton

A monitoring system was developed to gain information on the present level of pollutants in the Lake Balaton, Hungary. Determination of 13 polycyclic aromatic hydrocarbons (PAHs) and inorganic pollutants (mostly toxic metals) in aerosol, precipitation and sediment samples was carried out. The aim of collecting aerosol and precipitate samples in the same site at the same period was to determine the distribution of elements in two depositions. For the fractionation by particle size, aerosols were sampled by a cascade impactor. A simple three-stage sequential leaching procedure was applied to establish the distribution of metals among environmentally mobile, bound to carbonates and oxides, and environmentally immobile, (bound to silicates) fractions in aerosols. Sediment samples were collected from 17 different sites inside of the lake and 10 sites at harbors at 30–70 cm in depth. Core samples were cut to 10-cm pieces, dried at room temperature, and finally passed through a 63-μm sieve. Total concentrations of elements were determined by atomic absorption spectrometry (AAS) after an acidic digestion. The concentrations of PAHs were determined by HPLC method with fluorescence detection.In aerosol samples collected from September 6, 2002 to January 26, 2003, concentration of Cd was <0.1 μg/m³, and the majority of Cd has been found in the mobile fraction. Cadmium was associated to particles between 0.25 and 2 μm indicating the anthropogenic origin. Similar distribution of Pb was obtained in all seasons, and the highest concentration of Pb was found as 8.6 ng/m³ in particle size of 0.7 and 1.4 μm. Results of total concentration of elements of bottom sediments of the Lake Balaton and harbors were compared to Interim Sediment Quality Guideline (ISQG) values and the Probable Effect Level (PEL) values. Data showed that the average concentrations of elements were usually less than those of ISQGs and other background data for soils and geochemical values. The sediment is not polluted and its disposal is feasible. There is no direct correlation between the concentration of elements deposited onto the surface of the lake from dry and wet deposition and the upper part of the sediment. So, from the budget of the deposition, the concentration of elements in the upper layer of the sediment cannot be predicted.Seasonal changes of the concentration of PAHs in aerosol was observed, samples collected at winter contained the highest values. In December–January 2002/2003, the wet deposition was found as 64 μg/m² period. Among the individual compounds, the wet deposition rate of phenantrane, fluoranthene and pyrene was dominant, while for dry deposition, these compounds were fluoranthene and pyrene. The concentrations of ∑PAHs found for all sites and depth of sediment samples ranged from 11 to 1734 μg/kg dry weight with an average of 132 μg/kg. These values represent a quite low pollution level compared to other sediment with anthropogenic influence. Based on the results, it can be definitely confirmed that the chemical quality of the water and sediment of the Lake Balaton is satisfactory.     

氧化-还原低温引发甲基丙烯酸甲酯/丙烯酸丁酯超浓乳液聚合研究

以乳化剂十二烷基硫酸钠 (SDS)和共乳化剂十六烷醇 (HD)作为复合乳化体系 ,过氧化二苯甲酰(BPO)和N ,N 二甲基苯胺 (DMA)作为氧化还原引发体系 ,甲基丙烯酸甲酯 丙烯酸丁酯 (MMA BA)作为混合单体 ,制备了分散相占 83 %以上的稳定的超浓乳液 ,然后在低温下引发聚合 .探讨了引发剂浓度、氧化剂与还原剂的摩尔比、乳化剂的浓度、液膜增强剂的种类、聚合温度等因素对聚合稳定性和聚合速率的影响 ,测定并计算得到了聚合速率的公式 ;用激光散射粒度分布仪测定了聚合物乳胶粒子的大小及粒径分布 ,用透射电子显微镜观察了聚合物乳胶粒的形态 ,讨论了乳化剂浓度、聚合温度等对乳胶粒形态、大小的影响     

A competitive particle nucleation mechanism in the polymerization of homogenized styrene emulsions

The effects of concentrations of surfactant (sodium lauryl sulfate [SLS]) and initiator (sodium persulfate [SPS]) on the polymerization of homogenized styrene emulsions, stabilized by SLS/lauryl methacrylate (LMA) or SLS/stearyl methacrylate (SMA), were studied. The rate of polymerization increases with increasing [SLS] or [SPS]. In addition to monomer droplet nucleation, the formation of particle nuclei in the aqueous phase (homogeneous nucleation) plays a crucial role in the polymerization kinetics. In comparison with the LMA containing polymerization system, monomer droplet nucleation becomes more important when the more hydrophobic SMA was used as the costabilizer. Furthermore, the degree of homogeneous nucleation increases with increasing [SPS].     

Methylene‐Bridged Metallocenes with 2,2′‐Methylenebis[1H‐inden‐1‐yl] Ligands: Synthesis,Characterization, and Polymerization Catalysis of a Synthetically Simple Class of C2‐ and C2v‐Symmetric ansa‐Metallocenes

The acid‐catalyzed reaction between formaldehyde and 1H‐indene, 3‐alkyl‐ and 3‐aryl‐1H‐indenes, and six‐membered‐ring substituted 1H‐indenes, with the 1H‐indene/CH₂O ratio of 2 : 1, at temperatures above 60° in hydrocarbon solvents, yields 2,2′‐methylenebis[1H‐indenes] 1 – 8 in 50–100% yield. These 2,2′‐methylenebis[1H‐indenes] are easily deprotonated by 2 equiv. of BuLi or MeLi to yield the corresponding dilithium salts, which are efficiently converted into ansa‐metallocenes of Zr and Hf. The unsubstituted dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 1′ )]) is the least soluble in organic solvents. Substitution of the 1H‐indenyl moieties by hydrocarbyl substituents increases the hydrocarbon solubility of the complexes, and the presence of a substituent larger than a Me group at the 1,1′ positions of the ligand imparts a high diastereoselectivity to the metallation step, since only the racemic isomers are obtained. Methylene‐bridged ‘ansa‐zirconocenes’ show a noticeable open arrangement of the bis[1H‐inden‐1‐yl] moiety, as measured by the angle between the planes defined by the two π‐ligands (the ‘bite angle’). In particular, of the ‘zirconocenes’ structurally characterized so far, the dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[4,7‐dimethyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 5′ )] is the most open. The mixture [ZrCl₂( 1′ )]/methylalumoxane (MAO) is inactive in the polymerization of both ethylene and propylene, while the metallocenes with substituted indenyl ligands polymerize propylene to atactic polypropylene of a molecular mass that depends on the size of the alkyl or aryl groups at the 1,1′ positions of the ligand. Ethene is polymerized by rac‐dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1‐methyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 2′ )])/MAO to polyethylene waxes (average degree of polymerization ca. 100), which are terminated almost exclusively by ethenyl end groups. Polyethylene with a high molecular mass could be obtained by increasing the size of the 1‐alkyl substituent.     

2-亚甲基-1,3-二氧己烷衍生物的合成及自由基开环聚合

本文报道了四种2-亚甲基-1,3-二氧己烷类单体:4-甲基-2-亚甲基-1,3-二氧己烷(Ⅱ)、4,6-二甲基-2-亚甲基-1,3-二氧己烷(Ⅳ)、5,5-二甲基-2-亚甲基-1,3-二氧己烷(Ⅵ)和5,5-二乙基-2-亚甲基-1,3-二氧己烷(V Ⅲ)的合成以及自由基开环聚合。结果表明,上述单体在聚合过程中出现异构化开环现象。Ⅲ和Ⅳ的甲基位置在环上氧原子的α-碳原子上时,显示对异构化反应的影响比Ⅵ及Ⅷ的甲基和乙基在β-碳原子上时更显著。上述现象与异构化开环形成仲碳自由基中间体的倾向更大有关。 Ⅳ在苯溶液中及过氧化二叔丁基存在下,120℃反应,得到全部是聚-δ-戊内酯骨架结构的聚合物。提出了一种合成聚-δ-戊内酯类链结构的聚酯的新的途径和方法。     

A novel zirconocene/ultradispersed diamond black powder supported catalytic system for ethylene polymerization

A novel carrier of ultradispersed diamond black powder (UDDBP) was used to support metallocene catalyst. Al₂O₃ was also used as carrier in order to compare with UDDBP. Supported catalysts for ethylene polymerization were synthesized by two different reaction methods. One way was direct immobilization of the metallocene on the support, the other was adsorption of MAO onto the support followed by addition of the metallocene. Four supported catalysts Cp₂ZrCl₂/UDDBP, Cp₂ZrCl₂/Al₂O₃, Cp₂ZrCl₂/MAO/UDDBP and Cp₂ZrCl₂/Al₂O₃/MAO were obtained. The content of the zirconium in the supported catalyst was determined by UV spectroscopy. The activity of the ethylene polymerization catalyzed by supported catalyst was investigated. The influence of Al/Zr molar ratio and polymerization temperature on the activity was discussed. The polymerization rate was also observed.     

The size distribution for theA g RB f−g Model of polymerization

This paper gives the equilibrium distribution of polymer sizes for Flory'sA _g RB _f–g model of polymerization. In this model, the polymers are composed of structural units withg functional groups of the typeA and (f-g) functional groups of the typeB. Reaction is subject to three conditions: (1) Functional groups of the typeA react only with those of typeB, and vice versa. (2) Intramolecular reactions do not occur [and therefore only branched-chain (noncyclic) polymers and formed]. (3) Subject to conditions (1) and (2), all functional groups are equally reactive. The derivation employs Stockmayer's statistical mechanical method (first used on Flory'sRA _f model), coupled with a recursion giving the number of distinct polymers which may be assembled fromk units of theA _g RB _f–g type. We also give distributions for a limiting case of theA _g RB _f–g model, the so-calledA _g RB model. This paper completes the solution of the Smoluchowski coagulation equation (monodisperse case) for the kernelsa _ij =A + B(i +j)+ Cij. The proof will be given in another publication.     

Styrene polymerization in ternary microemulsions: effects of water-soluble and oil-soluble initiators

The polymerization of styrene in ternary microemulsions stabilized by the cationic surfactant tetradecyltrimethylammonium bromide was studied as a function of concentrations of water-soluble (potassium persulfate, KPS) and oil-soluble (AIBN) initiators. At a particular molar ratio of the initiators, similar maximum rates of polymerization can be achieved from using both types of the initiators. In addition, both initiated systems produced microlatexes with similar hydrodynamic radius, number of polymer particles, molecular weight of polystyrene and number of polymer chain per latex particle. But the dependencies of these latex parameters on concentrations of KPS and AIBN may not be the same. The polymerization mechanism appears to be similar, irrespective of using KPS or AIBN. It is discussed in terms of effective radicals produced for the polymerization. While the different dependencies of some latex parameters on concentrations of the initiators are attributed to the different efficiencies of the initiators in producing effective radicals.