THE POLYMERIZATION THERMOKINETICS OF PYRROLE IN THE PRESENCE OF IRON TRICHLORIDE

The polymerization thermokinetics of pyrrole in the presence of iron trichloride art studied by using a Calvet microcalorimoter. The apparent activation energy, the pre-exponential constant and reaction order of this reaction in the temperature range of 25.2—37℃are 34.5 KJ·mol~(-1), 10~(2.74)S~(-1) and 1 respectively. The activation free-energies of this reaction at 25.2°, 30°and 37℃are 91.8, 92.9 and 94.2 KJ·mol~(-1) respectively.     

分数级反应热动力学研究—丙烯酰胺聚合反应动力学

应用n级等摩尔浓度反应的热动力学理论,在30℃和40℃下研究了丙烯酰胺在水溶液中和CTAB胶束溶液中由亚硫酸钠引发的聚合反应动力学.讨论了引发剂和CTAB的浓度对聚丙烯酰胺分子量的影响。     

二氧化碳同环氧丙烷交替共聚用催化剂的研究

探讨了有机金属催化剂的组成及其对二氧化碳同环氧丙烷交替共聚产物结构的影响,发现二乙基锌—助剂体系的催化活性按如次顺序递降:二乙基锌—连苯三酚>二乙基锌—间苯二酚>二乙基锌—对苯二胺>二乙基锌—亚乙基脲。若用三异丁基铝代替二乙基锌同连苯三酚构成催化剂,则失去对二氧化碳同环氧丙烷交替共聚反应的活性同时,著者发现二乙基锌—二元芳胺催化体系与二乙基锌—二元酚催化体系的催化活性规律完全不同。     

超高分子量聚苯乙烯的合成和聚合反应动力学

杯芳烃钕与Mg(n Bu) 2 、HMPA所组成的三元络合催化剂用于苯乙烯配位聚合能以高收率制得超高分子量聚苯乙烯 .以甲苯为溶剂 ,在一定条件下制成三元配位催化剂 ,当 [Nd]=8× 10 - 4mol L ,[St]=4 .0mol L ,Mg Nd =2 0 .0 (摩尔比 ) ,HMPA Mg =1.0 (摩尔比 ) ,5 0℃聚合 4 5min ,聚合转化率可达到 80 %左右 .所得聚苯乙烯的重均分子量高达 2 10× 10 4 ,分子量分布指数为 1.6 1.间规聚苯乙烯含量为 81% .动力学研究表明 ,聚合反应速率与单体和主催化剂 杯 [6 ]芳烃钕的浓度分别呈 1次方关系 ,聚合反应的表观活化能为 4 1.7kJ mol     

3，9－二羟乙基－3＇，9＇－二苯甲基－1，5，7，11－四氧杂螺环［5，5］十一烷的合成和聚合反应

从两二酸二乙酯、氯乙酸乙酯和氯苄出发，经ＬｉＡｌＨ４还原，合成新的二元醇，进而合成新的螺环化合物：３，９－二羟乙基－３＇，９＇－二苯甲基－１，５，７，１１－四氧杂螺［５，５］十一烷．该化合物的结构由它的氢和碳－１３核磁共振谱、红外光谱和元素分析得到证明．该单体在三氟化硼乙醚络合物的作用下进行开环聚合反应．由于环上四个取代基的稳定作用，聚合物的收率比较低（产率１０％左右）．通过对聚合物的结构分析，提出了这一单体的阳离子开环聚合反应机理．对随聚合温度升高，聚合物中酯基／苯基的克分子比降低，以及本体聚合时得到交联聚合物等一系列现象作了探讨．     

反应原料组成对单分散苯乙烯微球粒径及其分布的影响

采用分散聚合工艺制备微米级单分散聚苯乙烯微球，并对分散聚合反应的内部影响因素(分散稳定剂、助稳定剂、单体、引发剂)进行了研究．结果表明，随着分散稳定剂和助稳定剂用量的增加，聚苯乙烯微球的粒径减小；随着单体和引发剂用量的增加，聚苯乙烯微球的粒径增大．分散稳定剂和单体用量是影响聚苯乙烯微球粒径分布的两个主要内部因素．     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS ⅪⅤ. STUDY ON THE CATALYSTS OF THE POLYMERIZATION OF AROMATIC NITRILES*

Various catalysts for the polymerization ot aromatic nitriles were investigated. It was found that Lewis acid-metal is a preferable catalyst system for the polymerization of aromatic nitriles, and the polymerization rate is about 10 times faster than Lewis acid alone. The polymerization rate of benzonitrile catalyzed by Lewis acid and different metals was measured, and the activity of metals was in the following decreasing order ,magnesium, zinc, sodium, calcium. Furthermore, the polymerization of benzonitrile catalyzed by different Lewis acid and zinc was also investigated.     

稀土催化体系Nd(napb)_3-AlEt_2Cl-Al(i-Bu)_3对双烯烃聚合的活性

分析了催化剂Nd(naph)_3-AlEt_2Cl-Al(i-Bu)_3三组分反应产物的组成,用动力学方法研究了其催化异戊二烯聚合的活性。催化剂各组分的配比及制备方法对其活性及利用率有显著影响。催化剂的利用率随它使用时浓度的减小而增大,最后达到恒定链终止反应由体系中过量的AlEt_2Cl吸附于活性体而发生。     

Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials

Summary. To substitute cross-linked photopolymers in rapid prototyping of mold materials and therefore extend the range of materials which can be casted, organo-soluble photopolymers were developed. Branched bisalkylacrylamides were suitable as base component for such formulations, due to their high reactivity, good mechanical properties, and excellent solubility of the formed polymers. These molding materials were used to prepare cellular biocompatible materials which could be used as bone replacement materials. Biocompatible crosslinkers based on methacrylates from hydrolyzed gelatine or lactic acid ethyleneglycol blockcopolymers and commercially available reactive diluents are the base components of such a formulation. Biocompatibility was investigated by osteoblast-like cells. Cellular biocompatible parts were obtained by thermal polymerization in soluble mould materials prepared by 3D-photoshaping.     

Preparation, structure and ethylene polymerization behavior of mixed-halide nickel(II) complexes and cobalt(II) complex containing imidazolium

Preparation of two imidazolium salts, two monomeric nickel(II) and one cobalt(II) complexes bearing imidazolium ligands is described, The solid-state structures of these compounds have determined by single-crystal X-ray diffraction. After activation with methylaluminoxane (MAO) the nickel complexes show moderate catalytic activities of up to 6 × 10⁵ g PE mol⁻¹Ni h⁻¹ for polymerization of ethylene. Catalytic activities, molecular weights have been investigated under the various reaction conditions.