超临界二氧化碳在高分子合成及加工领域的应用

重点概述了近年来超临界二氧化碳作为环境友好介质在高分子合成与加工方面研究的新进展,具体介绍了在超临界二氧化碳中丙烯酸的合成及疏水改性方面所做的工作,并在此基础上,展望超临界二氧化碳作为高分子合成介质的前景。     

六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合过程热互补效应的研究

六甲氧基甲基三聚氰胺（HMMM）－多元醇－丙烯酸酯－酸催化剂的混合体系在较高温度下同时进行缩聚和自由基聚合并表现出协同效应，DSC研究结果表明，丙烯酸酯在HMMM和酸的催化作用下可在较低温度下发生自由基聚合反应，并把反应释放出来的大量的热量有效地传递给缩聚发反应，满足缩聚反应吸热的要求，从而节省固化所需要的能量，为了提高储存稳定性。本文以潜酸催化剂作为酸的来源，对该混杂聚合体系进行了研究，仍有明显的热互补效应。     

Vanadium and Chromium Catalysts for Polymerization of Ethylene

In the present progress report literature data concerning homogeneous catalyst systems based on vanadium and chromium are reviewed and complemented by a combined study of the magnetic properties and the polymerization activity of such systems. The results show that vanadium forms active species as V (III ) and as V (II ), but chromium only as Cr (II ); models are suggested for the polymerization process. — A comparison with heterogeneous systems (Phillips catalyst) allows the establishment of some general principles concerning the activity of the catalyst and the properties of the polymers.     

苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

THE POLYMERIZATION OF AROMATIC AND HETEROCYCLIC DINITRILES

This review is a concise survey about the works in our laboratory on the polymerization of aromatic and heterocyclic dinitriles, including the polymerization kinetics and mechanism, synthesis of heterocyclic dinitriles, the structure of polymers, and the correlation between the structures of dinitriles and polymerization rates and thermal performances of Polymers.     

π－烯丙基稀土配合物的合成、结构及其催化烯烃聚合反应机理的研究 Ⅲ．LiLn（π－C_3H_5）_4·nD催化异戊二烯和苯乙烯均聚合反应的研究

本文研究了ＬｉＬｎ（π－Ｃ_３Ｈ_５）_４·ｎＤ（Ｌｎ＝Ｌａ、Ｔｂ，ｎ＝３；Ｌｎ＝Ｃｅ、Ｐｒ、Ｎｄ、Ｓｍ、Ｇｄ、Ｅｒ，ｎ＝２；Ｌｎ＝Ｙ、Ｄｙ，ｎ＝２．５；Ｄ为二氧六环）催化异戊二烯和苯乙烯的均聚合反应．其中，钇配合物的催化活性为最高．聚异戊二烯顺式－１，４链节含量在４３－８１％．聚合体系内少量给电子体的加入使聚合物中３，４－链节含量高达８４％．所得聚苯乙烯为无规结构．     

Analytical procedures for quantification of peptides in pharmaceutical research by liquid chromatography–mass spectrometry

Peptide quantification by liquid chromatography–mass spectrometry (LC–MS) combines the high resolving power of reversed-phase (RP) chromatography with the excellent selectivity and sensitivity of mass spectrometric detection. On the basis of comprehensive practical experience in the analysis of small molecules, pharmaceutical research is developing technologies for analysis of a growing number of peptidic drug candidates. This article is a detailed review of procedures based on LC–MS techniques for quantitative determination of peptides. With the focus on pharmaceutical applications several technologies for sample preparation, various aspects of peptide chromatography, important characteristics of ESI–MS, selectivity of MS-detection modes, the large variability of internal standards, and modern instrumentation are discussed. The demand for reliable, robust, sensitive, and accurate methods is discussed using numerous examples from the literature, complemented by experiments and results from our laboratory.     

壳聚糖-盐酸溶液中温度敏感的相分离行为

研究了壳聚糖 盐酸溶液温度敏感的相分离行为.通过对壳聚糖-盐酸溶液浊度变化的考察以确定相分离温度.测定不同盐酸浓度、壳聚糖浓度以及不同脱乙酰度的条件下的相分离温度，并用DLVO理论(Deijaguin-Landau and Verwey-Overbeck Theory)进行了解释. FTIR、X-ray以及SEM分别描绘了壳聚糖经相分离过程后官能团、结晶状态、颗粒形态的特点.     

丁二烯阴离子聚合动力学及活性种的研究

本文对于n-BuLi/2G引发的丁二烯阴离子聚合动力学数据及产物微观结构进行了解析。建立了动力学模型,提出了聚合反应机理。求得了单量体、一络合体和二络合体的增长速度常数和诸活性种之间的平衡常数以及它们对形成乙烯基结构的贡献。     

AROMATIC AND HETEROCYCLIC NITRILES AND THEIR POLYMERS ⅩⅦ. THE POLYMERIZATION KINETICS OF CYANOPYRIDINES AND CHARACTERIZATION OF THE FORMED POLYMER*

The polymerization rates of three cyanopyridines catalyzed by cuprous chloride-zinc system are measured, and the structure of the formed polymer is also determined. Compared with aromatic nitrile, cyanopyridines polymerize faster and form polyconjugated polymer with skeleton—(C=N)—_n instead of triazine structure. This chain-polymer possesses semiconductive property, and can be converted into conductive material by thermal treatment. In addition, the polymerization kinetics of 3-cyanopyridine catalyzed by 3-cyanopyridinium perchlorate is investigated. It is found that the polymerization rate is directly proportional to the concentrations of monomer and catalyst, and the activation energy of the polymerization is 103.1 KJ/mol.