Copolymerization of 2-Hydroxyethyl Methacrylate with Alkyl Methacrylates. Part IV. Mechanical Properties and Biocompatibility

Mechanical properties of copolymers of 2-hydroxyethyl methacrylate with methyl methacrylate, ethyl methacrylate, and n-butyl methacrylate have been investigated using an Instron tensile tester. It was observed that the overall mechanical properties decrease as the ester alkyl group of alkyl methacrylate becomes bulkier. Biocompatibility of the copolymers was also investigated by implanting them subcutaneously in rats.     

Polymers Derived from 4-Substituted Salicylic Acids as Antifungal Agents

4-Amino-, chloro-, and bromo-substituted salicylic acid-formaldehyde polymers and their metal chelates were screened for their antifungal activity. Various copolymers prepared from 4-chloro-(bromo)salicylic acid, formaldehyde, and other comonomers were also screened for their antifungal activity. All these polymers, copolymers, and polychelates were found active against several fungi Their fungicidal activities are compared with those of the corresponding monomers and monomeric chelates.     

Influence of Grafted Chain Length of a Phenolic Copolymer on Its Complex Formation with Poly(vinyl Pyrrolidone) and Poly(ethylene Oxide)

A phenolic copolymer has been grafted with oligomers of different chain lengths. Polymer-polymer complexation has been studied between graft copolymers and nonionic polymers, such as polyvinyl pyrrolidone) and poly(ethylene oxide), in an acetone-methanol mixture by several methods, e.g., viscosity, conductance, and apparent pH measurements. A distinct stepwise complexation between PVP and graft copolymers has been observed. The length of the side chain also seemed to influence interpolymer complex formation. Some of these observations have been interpreted with reference to the actual structure of the graft copolymers.     

Design,Synthesis, and Properties of Substituted Polyacetylenes

This article reviews recent topics on the polymerization of substituted acetylenes, focusing on the synthesis of poly(diphenylacetylenes) and the living polymerization of phenylacetylenes. Diphenylacetylene (DPA) polymerizes with TaCl_s-n-Bu₄Sn to give a polymer which is thermally very stable but insoluble in any solvents. DPAs with various groups (e.g.,p-Me₃Si,m-Me₃Ge, p-t-Bu,and_p-PhO) polymerize similarly. These polymers are soluble and their M¯_w's reach 1 × 10⁶ to 3 × 10⁶. Some of them are more gas-permeable than poly(dimethylsiloxane). Several acetylenes (e.g., ClC -n-C₆H₁₃ and HCUC-t-Bu) have been found to undergo living polymerization with MoOCl₄-n-Bu₄Sn-EtOH. Whereas phenylacetylene (PA) does not polymerize in a living fashion, ortho-substituents in PA more or less suppress termination and chain transfer. PAs with bulky ortho groups (e.g., CF₃ and Me₃Ge) especially undergo virtually ideal living polymerization.     

NMR Characterization of Substituted Aromatic Poly (Ether Sulofone)s

Abstract

The synthesis of a variety of substituted bisphenol A polysulfones, including nitro, amino, aminomethyl, ethyl, and methyl derivatives, is described. Nuclear magnetic resonance (NMR) (both proton and carbon, and several 2-D experiments) data confirm conclusions on the substitution site based on arguments on inductive effects in the phenyl rings. The proton ortho to the oxygen in the bisphenol A (BPA) residue is replaced in electrophilic substitution reactions. The degree of substitution was also calculated from the NMR results. The ethyl and methyl derivatives were expected, from the starting reactants, to each have a BPA ring substituted. The NMR data showed that, on the average, this is true. The nitro derivative also has substitution in every BPA ring, while the amino and aminomethyl derivatives have only intermittent BPA rings substituted. Measured degrees of substitution (DS) varied from 0.11 to 2.25.     

Polymer Composites with Plasma-Treated Fillers

A Large-volume Microwave Plasma (LMP) generator has been used to irradiate mica and ground-wood fibers in inert and active gas environments. Irradiated fillers were subsequently incorporated in a polypropylene matrix at solids levels of 10 and 20%. Calorimetrically measured heats of immersion showed that substantial changes in surface properties of fillers were effected by irradiation in ethylene, ammonia, and similar active gases. These surface changes are reflected In ultimate tensile and elongation properties of composites which show marked improvement over controls based on unirradiated fillers. Although no appreciable response in melt viscosity has been observed, surface treatment of fillers does seem to increase significantly melt elasticity of filled composites. The implications of improved performance motivate a more detailed study of the use potential of LMP in the fomulation of polymer composites.     

Case Studies With Mathematical Modeling of Free-Radical Multi-Component Bulk/Solution Polymerizations: Part 1

In part 1 of this series of two extensive overviews of multi-component polymerization case studies, we present mathematical modelling results with experimental confirmations. The case studies are from free-radical, bulk and/or solution polymerizations, covering the range from homo- to hexa-polymerization at both regular and elevated temperature levels, i.e., without and with possible depropagation steps. The model eventually tackles complex polymerization features, ranging from conversion-time histories to more esoteric multi-component composition and/or sequence length profiles. Part 2 of the series will describe more complicated situations with depropagation and composition control policies, all relying solely on a unique monomer/polymer database of physico-chemical properties and other characteristics, with no further parameter adjustment. These database items will be cited in tables in part 2 of the series.     

Synthesis of Stimuli-responsive Nanoparticles by Solution Polymerization

In this study, stimuli-responsive nanoparticles were prepared by solution polymerization. Two synthesis routes are proposed to synthesize the particles, the monomer route and the polymer/monomer route. For the monomer route, pH and thermal sensitive nanoparticles were synthesized from acrylic acid and N-isopropylacrylamide. For the polymer/monomer route, the pH sensitive nanoparticles were synthesized from chitosan and acrylic acid. The effect of reaction time, initiator concentration and agitation rate on the particle size and the size distribution were investigated. The stimuli-responsive nanoparticles could be directly blended with other polymers to prepare stimuli-responsive functional membranes.     

Synthesis and Characterization of Four-Arm Star Poly(ϵ-caprolactone)-Block-Poly(cyclic-carbonate methacrylate) Copolymers by Combining Ring-Opening Polymerization With Atom Transfer Radical Polymerization

Well-defined four-arm star poly(?-caprolactone)-block-poly(cyclic carbonate methacrylate) (PCL-b-PCCMA) copolymers were synthesized by combining ring-opening polymerization (ROP) with atom transfer radical polymerization (ATRP). First, a four-arm poly(?-caprolactone) (PCL) macroinitiator [(PCL-Br)₄] was prepared by the ROP of ?-CL catalyzed by stannous octoate at 110°C in the presence of pentaerythritol as the tetrafunctional initiator followed by esterification with 2-bromoisobutyryl bromide. The sequential ATRP of CCMA monomer was carried out by using the (PCL-Br)₄ tetrafunctional macroinitiator (MI) and in the presence of CuBr/2, 2′-bipyridyl system in DMF at 80°C with [(MI)]:[CuBr]:[bipyridyl] = 1:1:3 to yield block polymers with controlled molecular weights (M_n (NMR) = 10700 to 27300 g/mol) by varying block lengths and with moderately narrow polydispersities (M_w/M_n = 1.2–1.4). Block copolymers with different PCL: PCCMA copolymer composition such as 50:50, 70:30 and 74:26 were prepared with good yields (48-74%). All these block copolymers were well characterized by NMR, FTIR and GPC and tested their thermal properties by DSC and TGA.     

Preparation of Epoxy-Functionalized Magnetic Polymer Nanospheres for Magnetically Targeted Radiotherapy

Magnetic poly(styrene?methyl methacrylate-glycidyl methacrylate)/Fe₃O₄ nanospheres with epoxy groups were prepared by modified one-step mini-emulsion polymerization in the presence of Fe₃O₄ ferrofluids. The products were characterized by fourier-transform infrared spectrum, transmission electron microscopy, thermogravimetric analysis and vibrating sample magnetometer. After surface modification with diaminopropane, histidine was covalently linked to the amine group of magentic nanospheres using glutaraldehyde as crosslinker. Finally, the preliminary labeling study based on non-radioactive rhenium was carried out and the labeling efficiency reached 80.4%. Such magnetic nanospheres had promising potential in magnetically targeted radiotherapy of cancer.