STUDY ON OXID TIVE COUPLING OF METHANE Ⅱ.CATALY TIC PERFORMANCE AND CHARACTERIZATION OF TiO_2-BASED CATALYSTS

The catalytic performance of Mn/TiO_2,La-Mn/TiO_2,Li-La-Mn/TiO_2 etc for the oxidetive coupling of methane(OCM)was investignted.Thecatalysta were cheracterised with X-ray diffraction(XRD)and X-rayphotoelectron spectroscopy(XPS).The results reveal that catalyst Li-La-Mn/TiO_2 exhibits high activity and C_2 selectivity;Ti in this catalyst exists asTi~( 4) state;Li can promote the formation of lanthanum tituate via theinteraction between La and TiO_2;the formed La_2Ti_2O_7 and La_4Ti_9O_(24) aredistributed in the inner surface layer and Mn exists in outer surface layer in lowvalence states.The high activity and C_2 selectivity of catalyst Li-La-Mn/TiO_2are intimately related to the valence states of Mn,Li,La and theirdistribution on the catulyst surface layer.     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.     

Application of thermal analysis to study of the synthesis of K0.5Bi0.5Tio3 ferroelectric

Synthesis of potassium bismuth titanate ferroelectric by heating of mixtures prepared using oxide precursors, i.e. Bi₂O₃, TiO₂ and K₂CO₃ was investigated. DTA, TG, XRD and SEM methods were used to study the formation of intermediate compounds and the final product. Usage of associated homogenization and grinding of precursors mixture permits to decrease the temperature of formation of K_0.5Bi_0.5TiO₃. This revised version was published online in July 2006 with corrections to the Cover Date.     

A vibrational spectroscopic study of the adsorption of 4,4′-bipyridyl by sepiolite and smectite group clay minerals from Anatolia (Turkey)

The adsorption of 4,4-bipyridyl by natural sepiolite and smectite group clay minerals (bentonite, hectorite and saponite) from Anatolia (Turkey) has been studied using vibrational spectroscopy. Investigation of Fourier-transform infrared and Fourier-transform Raman spectra of adsorbed 4,4-bipyridyl indicate the presence of chemisorbed species. However, any evidence for the generation of anionic species on the surface of the phyllosilicates has not been detected. It is proposed that the adsorbed bipyridyl molecules on sepiolite are centrosymmetric and H-bonded to the surface hydroxyls through both the nitrogen lone pairs as bidentate ligands. The adsorbed bipyridyl molecules on the smectite group clays are coordinated to exchangeable cations both directly and also indirectly through water as monodentate ligands. XRD patterns of the clays studied are also recorded.     

Shear flow experiments in an assembly of gel beads and modelling of bingham behavior

In this paper, we present a rheological study of a compact layer of highly swollen gel beads. The flow regimes of these systems are modelled by an elastic sinusoid moving in a Newtonian fluid. This model predicts a yield stress varying with the square root of the elastic modulus of the gel bead. The slope at the origin (at zero velocity) of the flow curve is expected to depend only on geometrical parameters and on the solvent viscosity. The experimental data are in qualitative agreement with the theoretical predictions.     

Thermal transformations in phosphorites

The thermal transformations in phosphorites during flash calcination were investigated by FT-IR spectroscopy, X-ray diffraction and chemical analyses. During flash calcination changes occur, both in the composition of the phosphorite and in the crystallochemistry of the fluor-carbonate-apatite (francolite). The former changes include: decomposition of a great part of the calcite in the rock and oxidation of organic matter. The latter changes include: partial removal of the structural carbonate; partial relocation of the remaining carbonate ions in the apatite structure; a new arrangement of hydroxyl groups and fluorine on the hexagonal axis; partial condensation of the orthophosphate groups and increase of crystallite sizes. Isomorphous substitution of PO ₄ ^–3 in apatite by SO ₄ ^–2 and SiO ₄ ^–4 may take place.Dedicated to Prof. Menachem Steinberg on the occasion of his 65th birthdayThe financial support from Rotem-Amfert-Negev Phosphate Co. is gratefully acknowledged. We thank Dr. B. Pregerson of the Rotem-Amfert-Negev for supplying samples     

Electrochemical Characteristics of Mg0.9Ti0.1-xZrxNi （x=0.02, 0.04, 0.06） Alloys

Mg-based hydrogen storage alloys Mg0.9Ti0.1-xZrxNi (x=0.02, 0.04, 0.06) were successfully prepared by means of mechanical alloying (MA). The effects of Zr addition on the discharge capacity and the cycle performance of the Mg-based electrodes were also studied. It was found that the discharge capacities were improved with addition of a small amount of Zr and the cycle performances of the alloy were stabilized with the addition of Ti. The effects of surface modification or coating on the properties of Mg0.9Ti0.06Zr0.04Ni were also studied. The results indicated that coating with graphite improved both the discharge capacity and cycle life of the amorphous Mg0.9Ti0.06Zr0.04Ni electrode.     

2，2′-联吡啶和去甲基斑蝥酸根桥联双核铜（Ⅱ）配合物的合成、结构表征及抗癌活性的研究

利用二水氯化铜、2，2’—联吡啶和去甲基斑蝥酸钠合成了桥联配体双核铜配 合物[(bipy)—(DCA)cu—(DCA)—Cu(bipy)—(H20)]·3H20(式中bipy为2，2’—联 吡啶，DCA为去甲基斑蝥酸根)．通过元素分析、红外光谱、紫外—可见光谱和电导 对其结构进行了表征．用X射线单晶衍射测定了该配合物的晶体结构．配合物经验 分子式为Cu2C36H40N4O14，属三斜晶系，空间群PI，a＝1．1251(2)nm，b＝1． 2707(3)nm，c＝1．7345(4)nm,α＝94．86(3)°，β＝107．61(3)°，γ＝112． 50(3)°，V＝2．1264(7)nm^3,μ=1.066mm^-1,Z=2,Dc=1.374g/cm^3,F(000)=908, R=0.0547,wR2=0.1355,GOF=0.185.配合物中两个铜原子呈六配位的拉长畸变八面体 构型．生物活性测试结果表明该配合物具有较强的体外抗肿瘤活性．     

Time and temperature-based study for the production of high T C phase by sol-gel technique in Pb-bscco system

The high T_C superconducting phase Bi₂Sr₂Ca₂Cu₃Ox (2223) in the Pb-BSCCO system has been produced by EDTA-gel processing using nitrate solutions. The precursor has heated in two stages, at 300 and 800°C each for 2 h, to avoid the burning of the important species involved in the final product. The effects of time (6 to 48 h) and temperature (845 and 855°C) on the formation of the 2223 phase have been studied by sintering the samples in air. Thermal analysis (TG/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and a vibrating sample magnetometer (VSM) have been employed to investigate the powder produced at different stages of decomposition, oxidation and formation of sintered materials from the powders. The volume-fraction of the 2223 phase at 845°C increases with time, the maximum value of the 2223 phase was obtained at 120 h. It has been observed that the formation of the high T_C phase is remarkably enhanced at the temperature of the endothermic peak of the DTA curve. The best result has been obtained in the sample sintered for 24 h at the temperature 855°C (endothermic peak). This also indicated that at 855°C, the large volume-fraction of 2223 phase with T_C 113 K grew in short time and as the sintering time increased, it decomposed into the Bi₂Sr₂CaCu₂Ox (2212) phase and other phases.     

Micrometric BN powders used as catalyst support: influence of the precursor on the properties of the BN ceramic

Thin powders and foams of boron nitride have been prepared from molecular precursors for use as noble metal supports in the catalytic conversion of methane. Different precursors originating from borazines have been tested. The best results were obtained using a precursor derived from trichloroborazine (TCB) which, after reacting with ammonia at room temperature and then thermolyzing up to 1800°C, led to BN powders with a specific area of more than 300 m² g⁻¹ and a micrometric spherical texture. Comparable results were obtained using polyborazylene under similar conditions. Aminoborazine-derived precursors did not yield such high specific area ceramics but the BN microstructure resembled a foam with a crystallized skin and amorphous internal part. These differences were related to the chemical mechanism of the conversion of the precursor into BN. Polyhaloborazines and polyborazines yielded BN through gas-solid reactions whereas aminoborazine polymers could be kept waxy up to high temperatures, which favored the glassy foam. Catalysts composed of BN support and platinum have been prepared using two routes: from a mixture of precursor or by impregnation of a BN powder leading to very different catalysts.