A convenient and regioselective oxidative bromination of electron-rich aromatic rings using potassium bromide and benzyltriphenylphosphonium peroxymonosulfate under nearly neutral reaction conditions

Regioselective oxidative bromination of electron-rich aromatic rings has been studied using potassium bromide as a bromine source in the presence of benzyltriphenylphosphonium peroxymonosulfate as oxidant under nearly neutral reaction conditions. In most cases we obtained monobrominated derivatives regioselectively and in good to high yields without the aid of strong acids.     

不同介质凝胶体系中草酸钙结晶的研究

研究了五种不同介质（水、氯化钠、合成尿、正常人尿液和尿石患者尿液）的凝胶体系中草酸钙（CaC2O4）晶体的生长,及各种体系中防石药物柠檬酸钾（K3cit）对CaC2O4生长的影响.没有加K3cit时,CaC2O4晶体以一水草酸钙（calcium oxalate monohydrate, COM）为主要物相,但在氯化钠和合成尿的凝胶体系中同时出现了二水草酸钙（calcium oxalate dihydrate, COD）和三水草酸钙（calcium oxalate trihydrate, COT）,肾结石患者尿液中出现COD,而正常人尿液中没有COD和COT生成.加入K3cit后,水、氯化钠和合成尿介质的凝胶体系中,COT的含量显著增加,患者尿液中产生大量COD,而正常人尿液中出现了少量的COD和极个别的COT.COT的增加与低温、体系中高的离子强度及金属离子等因素有关.K3cit具有诱导COD和COT的生成、减小COM晶体比表面积的作用,从而有利于防治草酸钙结石的形成.     

NaCl(或KCl)-CH3OH-H2O体系的摩尔电导

CHaOH－HzO体系具有非常特殊的性质，同时在工业生产及临床治疗方面有着十分广泛的应用，文献中有大量地从不同角度就这类体系进行研究的报道．然而，就N3CI及KCI－CH30H－H20体系的电导研究而言，文献中仅有关干KCI－CH30H－H20（间隔20％CH30H）的部分研究工作．作为全面、系     

偶联剂对钛酸钾晶须/双马来酰亚胺树脂摩擦磨损性能的影响

研究了不同偶联剂及钛酸钾晶须添加量对钛酸钾晶须 /双马来酰亚胺树脂复合材料的摩擦磨损性能的影响 .结果发现 ,钛酸钾晶须能明显提高复合材料的耐磨性 ,晶须的加入使材料的磨损率得到显著降低 ;钛酸钾晶须对材料具有一定的润滑性 ,添加晶须后材料的摩擦系数与树脂基体基本相当 ;偶联剂对复合材料的摩擦系数影响不大 ,但是合适的偶联剂对材料耐磨性的提高则具有明显的作用 .晶须添加量较低时 ,复合材料的磨损机理主要为较严重的粘着磨损 ,晶须添加量较高时 ,疲劳磨损占主导地位 .     

我国区域绿色技术创新效率的分类测度和提升模式研究——基于非期望产出的SBM-SupSBM模型

本文首先运用考虑非期望产出的SBM-SupSBM模型估计我国各省市绿色技术创新效率并进行分类:稳定上升类、平稳类、大幅度波动类以及下降类。之后从企业内部和外部两方面对绿色技术创新效率提升的影响因素提出假设,着重考虑大幅度波动类别省份的效率提升。运用面板数据模型各影响因素进行验证,结论显示:企业规模对绿色技术创新效率波动较大的省份起到显著的抑制作用,环境规制和技术进步对绿色技术创新效率波动较大的省份作用不明显。针对分析结果,提出结论:在提升绿色技术创新效率的过程中,应注重企业规模和技术进步的协同作用,以及技术的开放程度。     

Flow injection analysis of potassium using an all-solid-state potassium-selective electrode as a detector

The concentration of potassium was determined by a combination of flow injection analysis (FIA) with an all-solid-state potassium sensor detection. The all-solid-state potassium-selective electrode possessing long-term potential stability was fabricated by coating an electroactive polypyrrole/poly(4-styrenesulfonate) film electrode with a plasticized poly(vinyl chloride) membrane containing valinomycin. The simple FIA system developed in this laboratory demonstrated sensitivity identical to that in the batch system and achieved considerably rapid assay (150 samples h⁻¹). Analyses of soy sauce and control serum samples by this FIA system yielded results in good agreement with those obtained by conventional measurements.     

Kinetic spectrophotometric methods for the determination of dothiepin hydrochloride in bulk and in drug formulation

Two simple and sensitive kinetic methods for the determination of dothiepin hydrochloride are described. The first method is based on kinetic investigation of the oxidation reaction of the drug with alkaline potassium permanganate at room temperature for a fixed time of 25 min. The absorbance of the colored manganate ions is measured at 610 nm. The second method is based on the reaction of dothiepin hydrochloride with 4-chloro-7-nitrobenzofurazan (NBD-Cl) in the presence of 0.1 mol L^–1 sodium bicarbonate. Spectrophotometric measurement was achieved by recording the absorbance at 470 nm for a fixed time of 60 min. All variables affecting the development of the color were investigated and the conditions were optimized. Plots of absorbance against concentration in both procedures were rectilinear over the ranges 4–24 and 50–250 g mL^–1, with mean recoveries 99.33±0.42 and 99.88±0.53, respectively. The proposed methods were successfully applied for the determination of dothiepin hydrochloride in bulk powder and in capsule dosage form. The results obtained were found to agree statistically with those given by the non-aqueous B.P. method. Furthermore the methods were validated according to USP guidelines and also assessed by applying the standard addition technique. The determination of dothiepin hydrochloride by the fixed concentration method is feasible with the calibration equations obtained, but the fixed time method proves to be more applicable.     

氨-碘酸盐介质中白喉类毒素的平行催化氢波

在 0 .4mol/LNH3 NH4Cl (pH 8.3 1 )介质中 ,白喉类毒素 (DT)于 - 1 .89V(vs.SCE)处产生的极谱催化氢波可被碘酸钾进一步催化 ,峰电流明显增大 ,但峰电位不变 ,产生一种氢的新动力波 ,建议称其为平行催化氢波。在 0 .4mol/LNH3 NH4Cl(pH 8.3 1 ) - 5 .0× 1 0 - 3 mol/LKIO3介质中 ,DT平行催化氢波的二阶导数峰电流与其浓度在 0 .2 μg/mL～ 1 .0 μg/mL内呈线性关系 ,可用于生物制品中DT含量的测定。     

测定痕量锰的锰(Ⅱ)-锌试剂-重铬酸钾体系催化分光光度法

在Na2B4O7-NaOH缓冲介质及加热条件下 ,锰 (Ⅱ )对重铬酸钾氧化锌试剂引起褪色 ,有明显的催化作用 ,据此建立了测定痕量锰的新方法 ;该法的线性范围为0.69～40μg/L,检出限为0.22μg/L ,反应表观活化能为87.1kJ/mol,反应表观速率常量1.10×10-3/s,用该法测定蒙药样品中锰含量 ,结果令人满意     

平行双铂丝微电极用于铁氰化钾电流滴定法测定抗坏血酸的研究

平行双柱微电极是一种基于可逆氧化还原物质在电极间反馈扩散使得信噪比进一步增大的新型微电极,作者首次将这种电极应用于电流滴定分析中。结果显示,电极间距很小时,终点突跃变敏锐,使灵敏度进一步提高。该方法不需搅拌溶液,单次测量样品量只需约3μ1,是一种有实用价值的新方法。