微波复合直流等离子体转化天然气制乙炔的研究

利用微波复合直流等离子体对天然气转化制乙炔反应进行了研究. 考察了氢烷比、气体流量、功率等参数对装置的能量利用率以及天然气转化反应的影响, 并考核了微波复合直流等离子体转化天然气制乙炔工艺的稳定性. 实验结果表明: 微波复合直流等离子体装置的能量利用率随等离子体工作气体的流量的增加而提高; 由于微波的作用使传统直流柱状等离子体分化为多根丝状等离子体, 从而使得电极的烧蚀方式由传统的点烧蚀变为面烧蚀, 并大幅度提高等离子体转化天然气工艺的稳定性和电极寿命; 甲烷的转化率和乙炔的收率随功率的增加而提高, 随CH₄/H₂比和气体流量的增加而降低, 在氢烷比为0.9、总气体流量为760 L/min、微波源输出电功率6 kW、直流电源输出功率90 kW时, 甲烷转化率可达84.4%, 乙炔选择性为75.6%, 乙炔收率为63.8%, 乙炔能耗达10.8 kWh•kg^－1; 电极寿命超过200 h.     

血红素LB膜的电化学行为

采用循环伏安法研究了血红素与脑磷脂混合Y型LB（Langmuir-Blodgett）膜在玻碳电极上的电化学行为，结果表明血红素LB膜有良好的电化学活性，在0．1mol/L KCl溶液中有一对氧化还原峰（－0．42V／－0．30V）；将血红素LB膜转移到玻碳电极表面得到的血红素LB膜修饰电极（heme LB-GC）对溶液中溶解氧的电化学还原有良好的催化作用，其催化还原过程具有不可逆电荷传递特性。     

多壁碳纳米管-酰基吡唑啉酮复合膜修饰电极测定异烟肼

报道了一种修饰电极--多壁碳纳米管-酰基吡唑啉酮复合膜修饰玻碳电极(MWNTs/HPMαFP/GCE ),研究了异烟肼在此修饰电极上的电化学行为及反应机理.与裸GCE和MWNTs/GCE相比,异烟肼在MWNTs/HPMαFP/GCE上的氧化峰电流和检测灵敏度大大提高,表明多壁碳纳米管和酰基吡唑啉酮产生了协同增效作用.在...     

碳纳米纤维负载Co3S4复合材料的合成及其在染料敏化太阳电池对电极的应用

采用水热法合成四硫化三钴（Co₃S₄）催化材料,并利用球磨和喷涂技术将其制备成对电极,结合新型无碘电解液Co²⁺/Co³⁺用于染料敏化太阳电池（dye-sensitized solar cells,简称DSCs）来研究其光电性能。测试结果显示,基于Co₃S₄对电极,DSCs的能量转化效率（power conversion efficiency,简称PCE）只有6.06%,远远低于Pt对电极（8.05%）。为了提高Co₃S₄的催化能力,采用静电纺丝技术制备碳纳米纤维（electrospun carbon nanofibers,简称ECs）,结合水热法制备出不同负载量的碳纳米纤维负载四硫化三钴（Co₃S₄/ECs）复合催化材料用于对电极,结果表明,Co₃S₄/ECs的PCE最高可达（8.22±0.08）%,优于Pt对电极。     

旋转铂盘电极上Cu(phen)_2~(2 )与6-巯基嘌呤的相互作用

在Tris-NaC1*(pH=7.2)缓冲溶液中,应用循环伏安法,微分脉冲伏安法、旋转圆盘电极实验、交流阻抗法及其数据模拟等技术研究了Cu(phen)2 25(phcn=1.10-邻菲咯啉)与6-巯基嘌呤(6-MP)的相互作用.结果显示.Cu(phen)2 2MP与6-MP无论在扩散控制过程或电化学控制过程都发生了相互作用.Cu(phen)2 2及其与6-MP的作用产物于铂电极上均呈现一对氧化还原峰,但后者呈现的氧化还原峰负移.峰电流减小.交流阻抗结果显示,无论6-MP存在与否,Cu(phen)2 2在交流阻抗谱上均呈现两个清晰的电容弧,但当6-MP存在时,电化学反应电阻和电化学吸脱附电阻均增大.Cu(phen)2 2在不同转速下的阻抗拟合结果显示.随转速增大.电化学反应电阻和电化学吸脱附电阻均减小.双电层电容呈增大趋势,而吸脱附电容呈减小趋势:当6-MP存在时.仍然呈现此变化规律.     

Determination of Selenium with a Poly(1,8‐diamino‐naphthalene)‐Modified Electrode

The performance of a poly(1,8‐diaminonaphthalene)‐modified electrode for the determination of the Se(IV) ion in an aqueous medium was investigated with anodic stripping voltammetry without the pretreating of the sample. The experimental parameters for the analysis of Se(IV) were optimized and the characteristics of this polymer‐modified electrode were investigated by using cyclic voltammetry. The Se(IV) ions were chemically deposited onto the surface of the pDAN‐Au electrode in an acidic medium. The detection limit employing the anodic stripping differential pulse voltammetry was 9.0×10^?9 M for Se(IV) with 4.4 % of RSD. Satisfactory result for the determination of Se(IV) was acquired employing a certified standard urine reference material, SRM's 2670 (trace element in urine) with 4.1 ppb of SD.     

A Study on Stripping Voltammetric Determination of Osmium(IV) at a Carbon Paste Electrode Modified In Situ with Cationic Surfactants

This article deals with the development of a method for the determination of osmium at a carbon paste electrode (CPE) modified with cationic surfactants of the quaternary ammonium salt type; namely, cetyltrimethylammonium bromide (CTAB) and 1‐(ethoxycarbonyl)‐pentadecyltrimethyl‐ammonium bromide (Septonex); both being added in situ and serving for preconcentration of osmium via its hexachloroosmate(IV) anion. The proper electrochemical detection was performed by cathodic scanning in the differential pulse voltammetric mode. Optimization studies concerning important experimental parameters also included a specially performed potentiometric titration, helping to define the actual stoichiometry for the ion‐pairing process, the main principle and driving force of the accumulation step. In a chloride/acetate buffer based supporting medium and with Septonex as the modifier of choice, the reduction signal for osmium was found to be proportional to the Os(IV) concentration in a range from 5×10^?9 to 5×10^?7 mol L^?1 with a limit of detection close to 5×10^?9 mol L^?1 (with preconcentration for 60 s). The method capable to determine Os(IV) in the presence of both Pt(IV) and Ir(III) was tested on model solutions as well as with real sample of industrial waste water (spiked with the analyte); both yielding the recovery rates within 88–99%.     

分子筛修饰电极中内电子传输机理的研究

用电化学方法聚合方法筛孔道内的苯胺,以聚苯胺分子筛修饰电极为模型研究了分子筛修饰电极的内电子传输机理,ＮａＹ分子筛的离子交换点位被苯胺修饰后,通过电聚合制得聚苯胺分子筛修饰电极（Ｐａｎ＾＋Ｙ－ＺＭＥ）,该电极通过聚苯胺链自身的电子跳跃来实现电子传输,且只有通过阴极富集后对溶液中Ｃｄ＾２＋才有响应,并能用于测定抗坏血酸。     

Determination of Trichloroacetic Acid (TCAA) Using CdO Nanoparticles Modified Carbon Paste Electrode

In this paper, the electrochemical behavior of a carbon paste electrode modified with CdO nanoparticles as a potential electrocatalyst for the reduction of trichloroacetic acid (TCAA) was investigated using cyclic voltammetry and double‐potential step chronoamperometry. The modified electrode showed a great enhancement in cathodic peak current with respect to reduction of TCAA in acidic aqueous solution. Using this increment, a quantitative method was developed for the determination of TCAA in aqueous solution. The detection limit and linear dynamic range of TCAA are 2.3×10^?6 M and 2.3×10^?4–3×10^?6 M, respectively.     

Interaction of the mutagen ethidium bromide with DNA, using a carbon paste electrode and a hanging mercury drop electrode

The interaction of ethidium bromide (2,7-diamino-10-ethyl-9-phenylphenanthridinium bromide; EB) with double stranded (ds) calf thymus DNA and thermally denatured single stranded (ss) DNA was studied in solution and at the electrode surface by means of transfer voltammetry using a carbon paste electrode (CPE) as working electrode in 0.2 M acetate buffer, pH 5.0. As a result of intercalation of this dye between the base pairs of dsDNA, the characteristic peak of dsDNA, due to the oxidation of guanine residues, decreased and after a particular concentration of EB a new peak at +0.81 V appeared, probably due to the formation of a complex between dsDNA and EB. The non-intercalated EB gives another peak, but at an increased concentration of the dye. A similar behaviour was observed during the interaction of the dye with ssDNA.Furthermore, the interaction of EB with ds, ss and supercoiled (sc) DNA was studied at the hanging mercury drop electrode (HMDE) surface by means of alternating current voltammetry in 0.3 M NaCl and 50 mM sodium phosphate buffer (pH 8.5) as supporting electrolyte. dsDNA yields a smaller peak at −1.42 V (peak III) compared to the one yielded by ssDNA, since the latter is a relaxed and more accessible form. By addition of EB into the buffer solution an increase of peak III was observed in the dsDNA form as well as in ssDNA resulting from their interaction with EB. Furthermore, the appearance of peak III in covalently closed circular scDNA after exposure to increasing concentrations of EB is a result of the introduction of ‘free ends’ in DNA affecting its structural integrity.