纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.     

Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

碱性溶液中金电极上氧还原中间物研究

应用改进了的旋转全电极上的电势阶跃计时库仑法,分别测定了不同电极电势下氧还原过程中电极吸附中间物和溶解中间物氧化所需的电量,实验证明,在此过程中电极上确有吸附中间物存在,而且是电极电势的函数,但其分子属性尚需进一步鉴别。     

Mass transfer to horizontal gas-generating electrodes

Mass transfer to a horizontal electrode during electrolytic evolution of oxygen and hydrogen at current densities of 100 to 10 000 A/m² is studied. The mass transfer intensity is evaluated from the diffusion layer thickness, which varies from 60 to 5 μm at such current densities. Calculations show that the decrease in the diffusion layer thickness is due to bubbles with a stationary interphase surface crossing the diffusion layer. During the hydrogen evolution, the diffusion layer thickness is nearly the same for vertical and horizontal electrodes. During the oxygen evolution, the diffusion layer is much thinner for a horizontal electrode. Additional decrease of the diffusion layer thickness during the evolution of oxygen is associated with the lesser solution density in the near-electrode layer and with its transport away by means of natural convection.     

Anodic stripping voltammetry of sulphide at a nickel film: towards the development of a reagentless sensor

The determination of sulphide at an electrochemically generated nickel oxide layer at glassy carbon and screen-printed electrodes in acidic media has been examined and appraised. The NiO layer was found to produce a stripping-like signal to sulphide and gave a linear peak current response from 20 to 90 μM. The response was further enhanced by repetitive cycling allowing accumulation of nickel sulphide at the electrode surface such that lower micromolar levels of sulphide (i.e. 5 μM) can be determined. The response at the NiO layer to sulphide is shown to be reproducible over a period of 24 h, thereby offering the development of a disposable amperometric sensor for sulphide.     

Adsorption of the fluoride ion on the surface of various faces of a single crystal of silver: a quantum-chemical study

The fluoride ion adsorption from a gas phase on various faces of a single crystal of silver is studied by a density functional method within a cluster model for metal. The adsorption bond energy is found to increase in the series Ag(100) < Ag(111) < Ag(311) < Ag(110). A substantial structural and energetic heterogeneity of various adsorption sites is revealed. The results are utilized to simulate the electrochemical interface between individual faces of a single crystal of silver and aqueous solutions containing the fluoride ion. It is assumed that the adsorption potential may be represented as the sum of two contributions, one of which describes the metal–ion interaction and the other, the ion solvation energy. The plotted adsorption terms take into account partial degradation of the fluoride ion when adsorbed from an aqueous solution. Estimates of discreteness of the electrical double layer are presented. A conclusion on the maximum manifestation of specific adsorption of the fluoride ion for the Ag(100) face is made.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 232–238.Original Russian Text Copyright © 2005 by Nazmutdinov, Zinkicheva.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

Determination of the specific interaction of disubstituted aromatic compounds on hydrous zirconium oxide-loaded porous polymer resin

Summary A porous polymer resin loaded with hydrous zirconium oxide (Zr-gel) was evaluated as a stationary phase for the liquid chromatographic separation of disubstituted aromatic compounds. The prepared Zr-gel was used to separate disubstituted phenols andortho-substituted benzoic acid derivatives in reversed-phase mode. The retention time of catechol was greater than those of other disubstituted phenols; this implies that the Zr-gel has specificity for the phenolic hydroxyl group. The retention behavior ofortho-substituted benzoic acid derivatives on the Zr-gel was also evaluated in reversedphase mode using buffer. Phthalic acid was specifically retained in the vicinity of pH 6.0, which has been regarded as the equal adsorbic point. Similar behavior was also observed for salicylic acid, although the retention time of salicylic acid was less than that of phthalic acid. It seems that the specific retention behavior of hydrous zirconium oxide is a result of complexation with ligands such as hydroxyl and carboxyl groups. The results of this study have revealed that the retention mechanism of hydrous zirconium oxide is a combination of ion exchange and interaction based on complexation with ligands.     

Direct electron transfer reaction of glucose oxidase at bare silver electrodes and its application in analysis

The direct electron transfer reaction of glucose oxidase (GOx) at a bare silver electrode is verified. The electron transfer number n = 2, electron transfer coefficient α = 0.45 and rate constant of the electrochemical reaction K_s = 0.1 s⁻¹ are obtained. This communication presents a multimolecular adsorption model to explain the properties of the direct electron reaction between GOx and bare silver electrodes. The residual valence force may be an important factor to ensure a direct electron transfer reaction on the bare electrode. On the basis of the experimental fact that only biologically active GOx exhibits electrochemical activity in solution, a facile analytical method for analyzing the active GOx concentration is developed. The results determined correspond very well to that of a spectrometric method.     

Liquid chromatography of benzene derivatives on a porous methacrylate copolymer containing epoxy groups

Summary The retention of benzene derivatives with nonpolar and polar substituents on a porous methacrylate copolymer containing epoxy groups using both nonpolar and polar eluents was investigated. When n-hexane is used as the eluent, the retention of n-alkylbenzenes and polymethylbenzenes is weaker than that of benzene. In the case of benzene derivatives containing polar functional groups their capacity ratios (k) on this porous polymer increases approximately linearly with the increase of the adsorbate molecules dipole moment. The retention characteristics of the methacrylate copolymer were compared with that of a styrene-divinylbenzene copolymer and silica gels with a hydroxylated surface and with a surface modified by chemically bonded alkylsilyl groups.