Electrochemical Immunoassay for Carbohydrate Antigen‐125 Based on Polythionine and Gold Hollow Microspheres Modified Glassy Carbon Electrodes

A new electrochemical immunosensor for the detection of carbohydrate antigen‐125 (CA125), a carcinoma antigen, was developed by immobilization CA125 antibody (anti‐CA125) on gold hollow microspheres and porous polythionine (PTH) modified glassy carbon electrodes (GCE). The gold hollow microspheres provided a biocompatible microenvironment for proteins, and greatly amplified the coverage of anti‐CA125 molecules on the electrode surface. The performance and factors influencing the immunosensor were investigated in detail. The detection is based on the current change before and after the antigen‐antibody interaction. Under optimal conditions, the amperometric changes were proportional to CA125 concentration ranging from 4.5 to 36.5 U/mL with a detection limit of 1.3 U/mL (at 3σ). The CA125 immunosensor exhibited good precision, high sensitivity, acceptable stability, accuracy and reproducibility. The as‐prepared immunosensors were used to analyze CA125 in human serum specimens. Analytical results suggest that the developed immunoassay has a promising alternative approach for detecting CA125 in the clinical diagnosis.     

Electrochemical Synthesis of Co-intercalation Compounds in the Graphite-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>System

Anodic oxidation of highly oriented pyrolytic graphite in an electrolyte containing concentrated sulfuric and anhydrous phosphoric acids is studied for the first time. The synthesis was carried out under galvanostatic conditions at a current I = 0.5 mA and an elevated temperature (t = 80°C). Intercalation compounds of graphite (ICG) are shown to form at all concentration ratios of H₂SO₄ and H³PO⁴ acids. The intercalation compound of step I forms in solutions containing more than 80 wt % H₂SO₄, a mixture of compounds of intercalation steps I and II forms in 60% H²SO⁴, intercalation step II is realized in the sulfuric acid concentration range from 10 to 40%, and a mixture of compounds of intercalation steps III and II is formed in 5% H₂SO₄ solutions. The threshold concentration of H₂SO₄ intercalation is ∼2%. With the decrease in active intercalate (H₂SO₄) concentration, the charging curves are gradually smoothed, the intercalation step number increases, and the potentials of ICG formation also increase. As the sulfuric acid concentration in the electrolyte changes from 96 to 40 wt %, the filled-layer thickness d _i in ICG monotonously increases from 0.803 to 0.820 nm, which apparently is associated with the greater size of phosphoric acid molecules. With further increase in H₃PO₄ concentration in solution, d _i remains unchanged. According to the results of chemical analysis, both acids are simultaneously incorporated into the graphite interplanar spacing and their ratio in ICG is determined by the electrolyte composition.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 651–655.Original Russian Text Copyright © 2005 by Leshin, Sorokina, Avdeev.     

Creeping motion of an assemblage of composite spheres relative to a fluid

The sedimentation of a homogeneous distribution of spherical composite particles and the fluid flow through a bed of these particles are investigated theoretically. Each composite particle is composed of a spherical solid core and a surrounding porous shell. In the fluid-permeable porous shell, idealized hydrodynamic frictional segments are assumed to distribute uniformly. The effect of interactions among the particles is taken into explicit account by employing a fundamental cell-model representation which is known to provide good predictions for the motion of a swarm of nonporous spheres within a fluid. In the limit of a small Reynolds number, the Stokes and Brinkman equations are solved for the flow field in a unit cell, and the drag force exerted by the fluid on the particle is obtained in a closed form. For a distribution of composite spheres, the normalized mobility of the particles decreases or the particle interactions increase monotonically with a decrease in the permeability of their porous shells. The effect of particle interactions on the creeping motion of composite spheres relative to a fluid can be quite significant in some situations. In the limiting cases, the analytical solutions describing the drag force or mobility for a suspension of composite spheres reduce to those for suspensions of solid spheres and of porous spheres. The hydrodynamic behavior for composite spheres may be approximated by that for permeable spheres when the porous layer is sufficiently thick, depending on the permeability.     

Preparation and characterization of spherical polymer packings from polybutadiene for size-exclusion chromatography

Porous polymer spherical particles for column packings in nonaqueous size-exclusion chromatography (SEC) were prepared from 1,2-syndiotactic polybutadiene by suspension and evaporation method. The polymer microbeads obtained were crosslinked by radical reaction between 2-vinyl groups in polybutadiene with ultraviolet radiation, to render them insoluble. These microbeads have wider chromatographic separation width than polystyrene column packings. In addition, the polybutadiene microbeads did not show the excessive retention observed with commercial polystyrene columns for polycyclic aromatic compounds. Therefore, a close correlation between the elution volume and M, for polycyclic aromatic compounds was observed with polybutadiene microbeads columns.     

Permeability of microscale fibrous porous media using the lattice Boltzmann method

The permeabilities of microscale fibrous porous media were calculated using the multiple-relaxation-time (MRT) lattice Boltzmann method (LBM). Two models of the microscale fibrous porous media were constructed based on overlapping fibers (simple cubic, body-centered cubic). Arranging the fibers in skew positions yielded two additional models comprising non-overlapping fibers (skewed simple cubic, skewed body-centered cubic). As the fiber diameter increased, the fibers acted as granular inclusions. The effects of the overlapping fibers on the media permeability were investigated. The overlapping fibers yielded permeability values that were a factor of 2.5 larger than those obtained from non-overlapping fibers, but the effects of the fiber arrangement were negligible. Two correlations were obtained for the overlapping and non-overlapping fiber models, respectively. The effects of the rarefaction and slip flow are also discussed. As the Knudsen number increased, the dimensionless permeability increased; however, the increase differed depending on the fiber arrangement. In the slip flow regime, the fiber arrangement inside the porous media became an important factor.     

A novel and simple pathway to synthesis of porous polyurea absorbent and its tests on dye adsorption and desorption

A novel one-step protocol for the preparation of porous polyurea material (PPU) through precipitation polymerization of toluene diisocynate (TDI) is presented. The process is based on step polymerization of one singlemonomer, TDI, with water in water-acetonemixed solvent. PPU is obtained without need for any porogen or additives, and no any chemical modification on the outcome polymer is necessary. The morphology, pore size and size distribution of PPU are characterized by scanning electron microscope and BET nitrogen adsorption. Taking acid fuchsine (AF) and Congo Red as dye examples in wastewaters, their adsorption on, desorption from PPU and the reusability of PPU were tested. Experimental conditions for AF adsorption were optimized with regard to pH, adsorption time, AF concentration and amount of PPU. Results demonstrate that the as-prepared PPU is of high performance in dyes adsorption and recycled use. This work presents therefore a novel and attractive candidate for removal of anionic dyes from wastewaters.     

Optimal error estimates of a decoupled scheme based on two-grid finite element for mixed Stokes–Darcy model

Although the numerical results suggest the optimal convergence order of the two-grid finite element decoupled scheme for mixed Stokes–Darcy model with Beavers–Joseph–Saffman interface condition in literatures, the numerical analysis only gets the optimal error order for porous media flow and a non-optimal error order that is half order lower than the optimal one in fluid flow. The purpose of this paper is to fill in the gap between the numerical results and the theoretical analysis.     

Photoswitchable Composite Polymer Electrolytes Using Spiropyran-Immobilized Nanoporous Templates

Composite polymer electrolytes (CPEs) with smart, stimuli-responsive characteristics have gained considerable attention owing to their noninvasive manipulation and applications in future technologies. To address this potential, in this work, we demonstrate photoresponsive composite polymer electrolytes, consisting of gel polymer electrolyte (GPE) and spiropyran-immobilized nanoporous anodic aluminum oxide (SP-AAO) templates. Under UV irradiation, the close SP form isomerizes to the open merocyanine (MC) form, creating extremely polarized AAO surfaces; whereas, under visible light irradiation, the MC form reverts to the SP form, creating neutral surface conditions. The electrostatic interactions between ions and AAO surfaces are investigated by attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Moreover, the behavior of ionic conductivity of the GPE@SP-AAO is found to be consistent with the kinetics of isomerization tracked by UV-Vis spectroscopy. This work provides a promising platform for developing next-generation photoelectronic smart devices.     

Ni–Al composite hydroxides fabricated by cation–anion double hydrolysis method for high-performance supercapacitor

Chemical doping of nickel hydroxide with other cations(e.g. Al~(3+)) is an efficient way to enhance its electrochemical capacitive performances. Herein, a simple cation–anion(Ni~(2+)and AlO_2) double hydrolysis method was developed toward the synthesis of nickel–aluminum(Ni–Al) composite hydroxides. The obtained composite hydroxides possesses a porous structure, large surface area(121 m~2/g) and homogeneous element distribution. The electrochemical test shows that the obtained composite hydroxides exhibits a superior supercapacitive performances(specific capacitance of 1670F/g and rate capability of 87% from 0.5 A/g to 20 A/g) to doping-free nickel hydroxide(specific capacitance of 1227 F/g and rate capability of 47% from 0.5 A/g to 20 A/g). Moreover, the galvanostatic charge/discharge test displays that after 2000 cycles at large current density of 10 A/g, the composite hydroxides achieves a high capacitance retention of 98%, indicative of an excellent electrochemical cycleability.     

硅氧烷交联的咪唑基团功能化聚苯醚/聚四氟乙烯耐高温质子交换膜

以聚苯醚(PPO)为基体材料, 通过溴甲基化及咪唑基团功能化, 与聚四氟乙烯(PTFE)复合、 硅氧烷基团水解交联及磷酸掺杂, 制备了兼具高磷酸掺杂含量、 高质子电导率和良好机械性能的高温质子交换膜材料. 以甲基咪唑(MeIm)和咪唑基硅氧烷化合物(SiIm)为功能化试剂(其中咪唑基团提供了磷酸作用位点, 同时SiIm中的硅氧烷基团水解后得到Si—O—Si交联网络结构), 提高了膜材料的机械稳定性. 与PTFE的复合进一步增强了膜材料的机械强度. 结果表明, 复合膜具有较高的电导率和一定的机械强度. 当磷酸掺杂质量分数为242.5%时, PPO-50%SiIm-50%MeIm/PTFE复合膜在160 ℃不加湿条件下的电导率为0.09 S/cm, 室温下的断裂拉伸强度为3.6 MPa.