Application of Graphite-Epoxy Composite Electrodes in Differential Pulse Anodic Stripping Voltammetry of Heavy Metals

An analytical study on the use of graphite-epoxy composite (GEC) electrodes for differential pulse anodic stripping voltammetry (DPASV) of heavy metals is presented. This study is accompanied by microscopic observations of the electrode surface before and after the stripping step in comparison to glassy carbon electrode. GEC electrodes show much better accumulation properties and consequently acceptable behaviour which makes them suitable as working electrodes in the DPASV of heavy metals. Lead determination in real water samples in a batch system as well as some preliminary results in a flow-through system are presented. The detection limits in batch measurements were 100ppb for Cd, 10pb for lead and 50ppb for copper. The detection limit for lead in the flow-through system was similar to that in the batch. The results obtained show that these low cost and easy to prepare materials can be of interest in future research concerning stripping techniques of heavy metals and other analytes.     

Selection of Anodic Material Used in Electrolytic Process for Producing Hypophosphorous Acid

Black lead, Ti-Ru and Ti-PbO2 were used as anode and stainless steel was used as cathode The electrolytic process of producing hypophosphorous acid with four-compartment electrodialytic cell was studied. The comparison of some factors, such as anodic voltage, product concentration and current efficiency, of black lead, Ti-Ru, and Ti-PbO2 electrodes was conducted. As a result, theTi-PbO2 electrode is the optimal anode material used, it can be in electrolytic process for producing hypophosphorous acid.     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

Electrokinetic characterization of a microporous non-commercial polysulfone membrane: phenomenological coefficients and transport parameters

Electrical and electrokinetic phenomena (electrical resistance, streaming potential and membrane potential) in a porous polysulfone membrane was studied in the framework of the linear thermodynamics of irreversible processes and the phenomenological coefficients were determined for different concentrations of NaCl and MgCl₂ solutions (10⁻³M<5×10⁻²M). From experimental values, other characteristic membrane parameters such as the concentration of fixed charge in the membrane (=−3×10⁻³M), the ionic transport numbers and permeabilities through the membrane (t(Na⁺)=0.392 and t(Mg⁺²)=0.363; P(Na⁺)=3.5×l0⁻⁸m/sec and P(Mg⁺²)=2.9×10⁻⁸m/sec) were also obtained. Membrane surface-electrolyte solution interface was characterized by zeta potential values. The effect of both salt concentration and pH on zeta potential results was also studied.     

SbF5/PAF—a novel fluorinating reagent in preparing fluorine compounds

A novel fluorination reagent and catalyst, SbF₅/PAF (porous aluminum fluoride), was prepared by impregnating SbCl₅ into PAF and then treating with anhydrous hydrogen fluoride. The prepared reagent had an excellent catalytic activity in halogen-exchange, and also improved the properties of SbF₅, such as hydroscopicity, corrosion, and toxicity. SbF₅/PAF was successfully used in organic synthesis as a fluorinating reagent, and a fixed bed catalyst for F/Cl exchange.     

Kaolin as support for porous layer open tubular columns

Summary PLOT columns have been prepared with kaolin as the liquid phase support. These columns show good efficiency with different stationary phases and good thermal stability with polar phases. The performance of columns is shown by the separation of various mixtures such as fatty acids, phenols and anilines which are of analytical importance.     

Preparation and evaluation of a large-volume radial flow monolithic column

In this study, a 38 mL monolith with homogeneous porous structure was produced by a single polymerization from glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) in the presence of porogens and an initiator. The uniform temperature distribution within the reaction system was achieved by adding reactant mixture continuously and enhancing the heat transfer ability of the polymerization system. Homogeneous porous structure in the monolith was proved by SEM and the pore size distribution profiles measured by mercury intrusion porosimetry. Experimental results from proteins separation indicated that the dynamic capacity and resolution of radial flow monolithic column were independent of flow rates. Furthermore, the pressure drop on the column was linearly dependent on the flow rate and did not exceed 1.7 MPa even at a flow rate of 50 mL/min, which proved that the prepared monolith could be used in the quick separation and preparation of biopolymers.     

Electrokinetic investigations of charged porous membranes

Asymmetric ultrafiltration membranes were prepared from fully aromatic polyamides differing in the diamine monomers of the polymeric backbone and from polysulfone. Nanofiltration membranes were made from polysulfone and polyethersulfone. The polysulfone as well as the polyethersulfone were chemically modified to change the surface charges of the membranes that were made from these polymers. This means neutral, positively as well as negatively charged membranes could be employed for the measurements. The surface properties of the membranes as a function of pH were determined by measuring the streaming potential in a perpendicular and horizontal mode. Applying proteins the values of the streaming potential changed depending on the original charges of the membranes as well as on the pH of the solution. The values shifted to either higher or lower absolute values. Thus, characterization of unused and used membranes can be carried out by electrokinetic measurements. This was also demonstrated using a membrane fitted out with invertase. The zeta potential of nanofiltration membranes, however, was only evaluated from the results obtained with the horizontally run cell.     

Characteristics of subtractive anodic stripping voltammetry of Pb and Cd at silver and gold electrodes

Silver and gold electrodes are useful for the quantitative determination of lead and cadmium with subtractive anodic stripping voltammetry (SASV). The use of SASV is essential for achieving good separation between the two peaks, to eliminate the interference of nitrates when cadmium is present and to allow analysis at very low concentrations without the removal of oxygen. The deposition and dissolution of Pb²⁺ and Cd²⁺ proceed at underpotential (UPD) on both electrodes. The UPD properties of the deposits are the main factor determining the analytical characteristics of the ASV method and are strongly affected by the type and concentration of the electrolyte. The effects of anions (Cl⁻, Br⁻, SO₄²⁻, NO₃⁻) and acids (HNO₃, HClO₄, H₂SO₄, HCl) are shown. The two electrodes complement each other and, in addition, enable the qualitative identification of Pb²⁺ and Cd²⁺, since the peaks appear in opposite order on the two electrodes. Analysis of mixtures of the two analytes is restricted on gold but not on silver. At gold the two peaks overlap: (i) at concentrations of cadmium higher than 250 nM at deposition times greater than 30 s, (ii) in the presence of copper at concentrations higher than 1 μM, and (iii) in the presence of Triton X-100 at concentrations above 10 mg/l. The repeatability at 10 nM analyte is better than 2.5%. The detection limits for Pb²⁺ and Cd²⁺ at 120 s deposition time and 3500 rpm rotation rate are: dl_Pb/Ag=0.04 nM; dl_Cd/Ag=0.7 nM; dl_Pb/Au=0.1 nM; dl_Cd/Au=0.3 nM. The analysis of lead and cadmium in natural waters has been performed.