Characteristics of Subtractive Anodic Stripping Voltammetry of Lead,Cadmium and Thallium at Silver‐Gold Alloy Electrodes

Silver‐gold alloy electrodes have been studied for the purpose of the quantitative determination of heavy metals by subtractive anodic stripping voltammetry, (SASV). The results have been compared with those obtained with the silver and gold electrodes. The 50/50 a/o Ag/Au alloy electrode is the most suitable for quantifying thallium in the presence of lead and cadmium. The separation of its peak from those of lead and cadmium is 200 mV, which is about twice the separation obtained on the pure metal electrodes and is also better than on mercury. The silver electrode is suitable for the simultaneous determination of thallium, lead and cadmium. The peaks of lead and cadmium overlap on the 50/50 alloy. Pure silver or pure gold can be used for simultaneous quantification of these two metals. The use of gold for quantifying lead and cadmium is more limited because the peak potential of cadmium is shifted in the negative direction as its concentration increases and at [Cd²⁺]>200 nM, the two peaks merge. SASV enables correction for background currents and is of utmost importance for obtaining well‐defined peaks. The peaks of lead, cadmium and thallium appear over a relatively narrow potential range (ca. 200 mV) on all the electrodes presented in this work. For this reason, the quantifying of a peak is based on the derivative at the inflection point of only one of its branches (ascending or descending). All SASV measurements were carried out without removal of oxygen.     

微孔型固体偏氟乙烯-六氟丙烯共聚物电解质

将固体聚合物电解质 (Ｓｏｌｉｄｐｏｌｙｍｅｒｅｌｅｃｔｒｏｌｙｔｅ)用于锂离子电池的研究已经有 3 0年的历史[1] ,从物理角度来看 ,研究过干态型 (ＤｒｙＳＰＥ)、凝胶型 (ＧｅｌｌｅｄＳＰＥ)和微孔型固体聚合物电解质 (ＰｏｒｏｕｓＳＰＥ)三大类型[2 ] ;从化学角度来看 ,研究过含氧、含氮、和含氟的等聚合物[1～ 6 ] .微孔型固体含氟聚合物电解质是近 1 0年来才开始研究并受到产业界很大关注的一种ＳＰＥ .固体聚合物电解质的应用可以解决液体电解质锂离子电池的漏液问题 ,并提高其安全性 ,还可以通过使用塑料包装来减小电池的重量…     

Complexation of Ni, Cu, Zn, and Cd by DOC in some metal-impacted freshwater lakes: a comparison of approaches using electrochemical determination of free-metal-ion and labile complexes and a computer speciation model, WHAM V and VI

Complexation of Ni(II), Cu(II), Zn(II), and Cd(II) by dissolved organic carbon (DOC) in some freshwater lakes in Rouyn-Noranda, Québec, Canada, where they were impacted by effluents from a nearby copper smelter, was measured by kinetic and equilibrium methods using cathodic and anodic stripping voltammetry. The measured free-metal-ion and labile metal-complex concentrations were compared with the predictions made by a widely-used computer speciation model, the Windermere Humic Aqueous Model (WHAM): WHAM V and its improved version WHAM VI. If it is assumed that 65% of the DOC is “active”, i.e. behaving as isolated humic substances such as fulvic acid, both versions of WHAM are able to predict the labile and free-metal-ion concentrations of Ni, Zn, and Cd reasonably well; however, both underestimate the free-copper-ion concentration by one to two orders of magnitude. WHAM VI is generally better than or equal to WHAM V for successfully predicting most of the free-metal-ion concentrations. The modelled competition by Al(III) and Fe(III) in the lake surface waters showed that in most cases Cu(II) was most affected by this competition. WHAM VI predicts a larger effect from the Al(III) and Fe(III) competition than does WHAM V.     

Transient electrophoresis of a charged porous particle

The starting electrophoretic motion of a porous, uniformly charged, spherical particle, which models a solvent-permeable and ion-penetrable polyelectrolyte coil or floc of nanoparticles, in an arbitrary electrolyte solution due to the sudden application of an electric field is studied for the first time. The unsteady Stokes/Brinkman equations with the electric force term governing the fluid velocity fields are solved by means of the Laplace transform. An analytical formula for the electrophoretic mobility of the porous sphere is obtained as a function of the dimensionless parameters , , , and , where a is the radius of the particle, κ is the Debye screening parameter, λ is the reciprocal of the square root of the fluid permeability in the particle, ρ_p and ρ are the mass densities of the particle and fluid, respectively, ν is the kinematic viscosity of the fluid, and t is the time. The electrophoretic mobility normalized by its steady-state value increases monotonically with increases in and , but decreases monotonically with an increase in , keeping the other parameters unchanged. In general, a porous particle with a high fluid permeability trails behind an identical porous particle with a lower permeability and a corresponding hard particle in the growth of the normalized electrophoretic mobility The normalized electrophoretic acceleration of the porous sphere decreases monotonically with an increase in the time and increases with an increase in from zero at .     

Electrodeposition of mercury film on electrodes modified with clay minerals

A new type of carbon paste electrode modified with clay mineral and covered with a mercury film is presented in this work. Electrodeposition of the mercury film was performed on the carbon paste electrode modified with montmorillonite. The mercury film was deposited by both electrodeposition in situ and a preliminary electrodeposition. The pre-deposited film of mercury showed to be suitable for anodic stripping voltammetry. An open-circuit sorption of Cd, Pb, and Cu with subsequent anodic stripping voltammetry exhibited higher current responses of metals. Besides the enhanced sensitivity superior separation of the current responses during a simultaneous stripping of metals is expected to be achieved by means of the newly prepared electrode. Presented at the 57th Congress of Chemical Societies, Tatranské Matliare, 4–8 September 2005.     

高砷低金银的铅阳极泥中银的冶炼

本文报导了将纯碱加入砷含量高的铅阳极泥熔炼成贵铅，用硝酸溶解，硫氰酸盐沉淀，再用锌粉还原得银的方法。从而避免砒霜挥发。     

Underpotential Deposition Study and Determination of Bismuth on Gold Electrode by Using Voltammetry

ＴｈｅｃｏｍｂｉｎａｔｉｏｎｏｆｓｔｒｉｐｐｉｎｇｖｏｌｔａｍｍｅｔｒｙｗｉｔｈＵＰＤｃａｎｌｅａｄｔｏｔｈｅｉｍｐｒｏｖｅｍｅｎｔｏｆｓｅｎｓｉｔｉｖｉｔｙ ,ｓｅｌｅｃｔｉｖｉ ｔｙａｎｄｒｅｖｅｒｓｉｂｉｌｉｔｙｆｏｒｅｌｅｃｔｒｏａｎａｌｙｔｉｃａｌｐｕｒｐｏｓｅａｎｄａｖｏｉｄｔｈｅｕｓｅｏｆｔｏｘｉｃｍｅｒｃｕｒｙａｓｔｈｅｗｏｒｋｅｌｅｃｔｒｏｄｅ1ａｎｄｔｈｅｎａｎａｌｙｔｉｃａｌａｐｐｌｉｃａｔｉｏｎｓｈａｖｅｂｅｅｎｄｅｓｃｒｉｂｅｄ .2 4 Ｉｎｔｈｉｓｗｏｒｋ ,ｗｅｄｅｖｅｌｏ…     

Anodic oxidation of silver in 1-butyl-3-methylimidazolium bromide ionic liquid

Electrochemical oxidation of silver in the 1-butyl-3-methylimidazolium bromide ([BMIm]Br) ionic liquid is studied by cyclic voltammetry, chronopotentiometry, chronoammetry, and gravimetry. Two electrode processes irreversibly proceed on the silver electrode in the potential range studied: the formation of compound [BMIm]⁺[AgBr₂]^?, which is soluble in [BMIm]Br, and difficultly soluble AgBr.     

Porous ceramic bed supports for fused silica packed capillary columns used in liquid chromatography

Porous ceramic bed supports for fused silica packed capillary columns utilized in liquid chromatography were prepared by polymerizing solutions containing potassium silicate in-situ within a column to create a mechanically stable, rugged, and easily constructed termination. The effect of the bed support length on efficiency, and comparisons to glass wool bed supports, were considered in terms of column efficiencies and hydrodynamic variables. Results obtained indicate better performance for the ceramic bed support.     

Morphological and structural change of nano-pored alumina membrane above 1200 K

The transition and the change in pore morphology of a porous alumina membrane prepared by anodically oxidizing aluminum in sulfuric acid were studied mainly by TG-DTA, TMA, dilatometry and TEM. At ca. 1243 K, TMA showed an expansion followed by contraction; the CO₂ and SO₂ gases were quickly discharged, and the pore morphology of the as-prepared porous membrane (ca 150 mm-t, with pores ca 25 nm in diameter and containing ca 11% by mass of SO₂) showed an abrupt change, but the pores were retained to ca. 1573 K. Sulfur incorporated in the membrane was lost in two stages, i.e., at ca 1243 K and in a range up to 1373 K. Isothermal measurements revealed the complex crystallization of the amorphous phase into polycrystalline phase. This revised version was published online in August 2006 with corrections to the Cover Date.