CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS——Ⅱ. POLY(p-PHENYLENE 2,6-NAPHTHALATE)

Confined thin film melt polymerization (CTFMP) of naphthalene chloride/hydroquinone (NCMQ, 1/1, molar)mixtures at polymerization temperatures (T_p) below ca. 300℃ resulted in relatively thick, elongated crystals. Polymerizationof NC/HQ above 300℃ between glass yielded well-formed lamellar crystals ca. 100 A thick. Phase Ⅰ and Ⅱ [001] EDpatterns were obtained for all T_p, the relative amount of phase Ⅰ increasing with T_p. Polymerization of naphthalenedicarboxylic acid/hydroquinione diacetate 1/1 mixtures at high T_p also yielded lamellar crystals that "curled up" off of thesubstrate. When the high temperature CTFMP polymerization was conducted between mica, aggregates of lamellae on-edgedeveloped but epitaxial growth did not occur. Epitaxial growth of lamellae between mica could be obtained, however, byconfined thin film solution polymerization, with both of the latter samples yielding apparently related ED patterns from adifferent unit cell than phase Ⅰ or Ⅱ. Fiber patterns, obtained from sheared samples, indicated considerably greater crystaldisorder than in the nascent crystals. Refinement of the phase Ⅰ unit cell parameters, based on the [001] and [01 1] EDpatterns, with modeling based on Cerius~2, suggests a monoclinic phase Ⅰ unit cell with a = 7.76, b = 5.71, c = 14.99 A, α = γ= 90°, β= 99.7°, ρ = 1.47 g/cm~3, space group P12_1/al.     

Flame Temperature Effect on the Structure of SiC Nanoparticles Grown by Laser Pyrolysis

Small SiC nanoparticles (10 nm diameter) have been grown in a flow reactor by CO₂ laser pyrolysis from a C₂H₂ and SiH₄ mixture. The laser radiation is strongly absorbed by SiH₄ vibration. The energy is transferred to the reactive medium and leads to the dissociation of molecules and the subsequent growth of the nanoparticles. The reaction happens with a flame. The purpose of the experiments reported in this paper is to limit the size of the growing particles to the nanometric scale for which specific properties are expected to appear. Therefore the effects of experimental parameters on the structure and chemical composition of nanoparticles have been investigated. For a given reactive mixture and gas velocity, the flame temperature is governed by the laser power. In this study, the temperature was varied from 875°C to 1100°C. The chemical analysis of the products indicate that their composition is a function of the temperature. For the same C/Si atomic ratio in the gaseous phase, the C/Si ratio in the powder increases from 0.7 at 875°C up to 1.02 at 1100°C, indicating a growth mechanism limited by C₂H₂ dissociation. As expected, X-ray diffraction has shown an improved crystallisation with increasing temperature. Transmission electron microscopy observations have revealed the formation of 10 nm grains for all values of laser power (or flame temperature). These grains appear amorphous at low temperature, whereas they contain an increasing number of nanocrystals (2 nm diameter) when the temperature increases. These results pave the way to a better control of the structure and chemical composition of laser synthesised SiC nanoparticles in the 10 nm range.     

111In–L–LDL and 153Gd–L–LDL as radiotracers for detection of AR4‐2J rat pancreatic tumors

Pancreatic cancer has an extremely poor prognosis, due, in part, to lack of methods for early diagnosis. The present study was designed to evaluate the potential of labeling low‐density lipoprotein (LDL) with a radionuclide using a lipid chelating agent, bis(stearylamide) of diethylenetriaminepentaacetic acid (L), to detect pancreatic tumors by gamma‐scintigraphy. Previous studies indicated that the difficulty of visualization of pancreatic tumors was due to their poor vascularization. This study compares the ability of two radiotracers, ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL to target highly vascularized rat pancreatic tumors (AR4‐2J) implanted in nude mice. Biodistribution studies showed that the tumor uptake of ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL tracers was twofold and fivefold higher respectively than with the controls (¹¹¹In citrate and ¹⁵³Gd citrate respectively). These tracers would thus be suitable for scintigraphic imaging. We show here that LDL could be employed as a delivery system for tracers such as ¹¹¹In or ¹⁵³Gd when these two radionuclides are complexed by a lipid‐chelating anchor, and that ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL enabled better visualization of the pancreatic tumor tissues, with a better result with ¹⁵³Gd–L–LDL. Copyright © 2004 John Wiley & Sons, Ltd.     

通过J/Ψ→N(N-)M衰变研究N*时的核子极点效应

研究了J／Ψ→pp^-π衰变过程中核子极点图的贡献，特别是由离壳效应带来的贡献．发现衰变宽度对形状因子是敏感的．在通过用J／Ψ→pp^-π衰变研究N^*时，核子极点图作为背景道的贡献是非常重要的；在通过J／Ψ→pp^-η和pp^-η研究N^*时，核子极点图的贡献可忽略不计；在通过J／Ψ→pp^-ω研究N^*时，核子极点图有明显的贡献．     

Castelnuovo-Mumford regularity by approximation

The Castelnuovo-Mumford regularity of a module gives a rough measure of its complexity. We bound the regularity of a module given a system of approximating modules whose regularities are known. Such approximations can arise naturally for modules constructed by inductive combinatorial means. We apply these methods to bound the regularity of ideals constructed as combinations of linear ideals and the module of derivations of a hyperplane arrangement as well as to give degree bounds for invariants of finite groups.     

Schiff碱水杨醛苯甲酰腙的特性

研究了 Schiff碱水杨醛苯甲酰腙 (简称 SBH)晶体在 DMSO及其 DMSO- H2 O的混合溶剂中的红外光谱 ,通过 SBH氘代前后的 IR对比发现 ,羟基氢质子与混合溶剂 DMSO- H2 O(3∶ 1 ,V/ V)产生较大的相互作用。向溶有 SBH的 75 % DMSO- 2 5 % H2 O的溶液滴加 KOH发现 ,SBH分子上的 C O羰基基团先与 KOH作用 ,其后与 O H 羟基基团作用     

Sulfur adsorption on Fe(1 1 0): a DFT study

The adsorption of atomic S on the Fe(1 1 0) surface is examined using density functional theory (DFT). Three different adsorption sites are considered, including the atop, hollow and bridge sites and the S is adsorbed at a quarter monolayer coverage in a p(2 × 2) arrangement. The hollow site is found to be the most stable, followed by the bridge and atop sites. At all three sites, S adsorption results in relatively minor surface reconstruction, with the most significant being that for the hollow site, with lateral displacements of 0.09 Å. Comparisons between S-adsorbed and pure Fe surfaces revealed reductions in the magnetic moments of surface-layer Fe atoms in the vicinity of the S. At the hollow site, the presence of S causes an increase in the surface Fe d-orbital density of states between 4 and 5 eV. However, S adsorption has no significant effect on the structure and magnetic properties of the lower substrate layers.     

Recent developments in the synthesis of 11β-aryl-estrone derivatives

An industrial synthesis of 11β-aryl-estrone derivatives is described, based on the 1,4-addition of the aryl side-chain, as a cuprate, on to a mixture of allylic 5(10) alpha and beta epoxides, followed by hydrolysis and subsequent aromatization.     

利用电泳技术在不锈钢和铁基底上制备MgB2带材

本文首次报道了利用电泳技术在铁和不锈钢基底上制备MgB2超导带材.电阻测量表明,沉积在铁和不锈钢基底上MgB2带材的超导零电阻转变温度分别为37.5K和31K,超导转变宽度分别为0.3K和1K.磁测量表明,(5K,OT)时不锈钢基底上带材的临界电流密度为6×105(A/cm2).X射线衍射谱和扫描电子显微镜图象表明样品结晶良好,晶粒生长致密.本工艺制备MgB2带材时不受系统真空度的限制,生长迅速,成本低廉,并且可以根据不同的需要任意选择基底的形状和大小.     

Dimer of Bis[trans-5-methyl-2-[2-（4-methoxylphenyl） ethenyl]-benzoxazole]di-μ-nitratosilver（I）

1 INTRODUCTION We are presently involved in the synthesis and photodimerization of the analogues of trans-2-sty- rylbenzoxazole (BOEP), which have been widely reported as fluorescent whiteners and remedies[1]. Some structures of BOEP derivatives and thei…