Controllable synthesis,characterization,and growth mechanism of hollow Zn_x Cd_(1-x) S spheres generated by a one-step thermal evaporation method

Novel hollow ZnxCdl xS spheres that are uniform in size are synthesized through the one-step thermal evaporation of a mixture of Zn and CdS powder. From an X-ray diffraction （XRD） study, the hexagonal wurtzite phase of ZnxCdl_xS is verified, and the Zn mole fraction （x） is determined to be 0.09. According to the experimental results, we propose a mechanism for the growth of Zn0.09Cd0.91S hollow spheres. The results of the cathodoluminescence investigation indicate uniform Zn, Cd, and S distribution of alloyed Zn0.09Cd0.91S, instead of separate CdS, ZnS, or nanocrystals of a core- shell structure. To the best of our knowledge, the fabrication of ZnxCd1-xS hollow spheres of this kind by one-step thermal evaporation has never been reported. This work would present a new method of growing and applying hollow spheres on Si substrates, and the discovery of the Zn0.09Cd0.91S hollow spheres would make the investigation of ZnxCd1-xS micro/nanostructures more interesting and intriguing.     

SYNTHESIS OF MACROMONOMER USING END FUNCTIONAL POLYSTYRENE PREPARED FROM p-METHOXYBENZYL p-TRIMETHYL-SILYLPHENYL SELENIDE AS A PHOTOINIFERTER

The end functional polystyrene having phenylseleno group at ω-chain end was prepared from radical polymerization of styrene in the presence of p-methoxybenzyl p-trimethylsilylphenyl selenide as a photoiniferter. The phenylseleno group at ω-chain end in polystyrene was eliminated by hydrogen peroxide. The resulting polystyrene was interconverted quantitatively to polystyrene having epoxy end group by the oxidation with m-chloroperbenzoic acid. The macromonomer having a meth-acryloyl end group was synthesized from polystyrene containing epoxy end group with methacrylic acid in xylene at 140°C. Copolymerization of this macromonomer with methyl methacrylate afforded effectively a graft copolymer composed of a poly-(methyl methacrylate) backbone and polystyrene branches.     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.     

Higher‐Dimensional Unification with continuous and fuzzy coset spaces as extra dimensions

We first review the Coset Space Dimensional Reduction (CSDR) programme and present the best model constructed so far based on the , 10‐dimensional E₈ gauge theory reduced over the nearly‐Kähler manifold with the additional use of the Wilson flux mechanism. Then we present the corresponding programme in the case that the extra dimensions are considered to be fuzzy coset spaces and the best model that has been constructed in this framework too. In both cases the best model appears to be the trinification GUT .     

Ultrathin MnO2 nanosheets grown on hollow carbon spheres with enhanced capacitive performance

Ultrathin MnO₂ nanosheets grown on the surface of hollow carbon spheres (MnO₂/HCSs) were fabricated by the redox reaction between carbon spheres with KMnO₄ in aqueous solution. Due to the porous structure and large amounts of active sites, MnO₂/HCSs exhibit excellent capacitive performance with 227.5 F g⁻¹ at 1 A g⁻¹. After 5000 cycles, the capacity retention of MnO₂/HCSs remains 96%, indicating its good cycling stability. These results demonstrate that MnO₂/HCSs are promising supercapacitor electrode material and this work provide a facile method for growth of ultrathin MnO₂ nanosheets on carbon substrate.     

The Effect of the Modification of Carbon Spheres with ZnCl2 on the Adsorption Properties towards CO2

Zinc chloride and potassium oxalate are often applied as activating agents for carbon materials. In this work, we present the preparation of ZnO/carbon spheres composites using resorcinol-formaldehyde resin as a carbon source in a solvothermal reactor heated with microwaves. Zinc chloride as a zinc oxide source and potassium oxalate as an activating agent were applied. The effect of their addition and preparation conditions on the adsorption properties towards carbon dioxide at 0 °C and 25 °C were investigated. Additionally, for all tested sorbents, the CO₂ sorption tests at 40 °C, carried out utilizing a thermobalance, confirmed the trend of sorption capacity measured at 0 and 25 °C. Furthermore, the sample activated using potassium oxalate and modified using zinc chloride (a carbon-to-zinc ratio equal to 10:1) displayed not only a high CO₂ adsorption capacity (2.69 mmol CO₂/g at 40 °C) but also exhibited a stable performance during the consecutive multicycle adsorption–desorption process.     

球面稳定同伦元素α1β1βs的非平凡性

决定球面稳定同伦群是同伦论中的核心问题之一,是非常重要的．该文证明:球面稳定同伦元素α1β1βs是一个阶为p的非平凡元素,其中p≥5是任意奇素数,1≤s相似文献   

Investigations on Pd:SnO2/porous silicon structures for sensing LPG and NO2 gas

P-type porous silicon (PS) structure has been prepared by anodic electrochemical etching process under optimized conditions. Photoluminescence studies of the PS structure show emission at longer wavelengths (red) for the excitation at 365 nm. Scanning electron microscope investigations of the PS surface confirm the formation of uniform porous structure, and the pore diameter have been estimated as 25 μm. Pd:SnO₂/PS/p-Si heterojunction with top gold ohmic contact developed by conventional methods has been used as the sensor device. Sensing properties of the device towards liquefied petroleum gas (LPG) and NO₂ gas have been investigated in an indigenously developed sensor test rig. The response and recovery characteristics of the sensor device at different operating temperatures show short response time for LPG. From the studies, maximum sensitivity and optimum operating temperature of the device towards LPG and NO₂ gas sensing has been estimated as 69% at 180 °C and 52% at 220 °C, respectively. The developed sensor device shows a short response time of 25 and 57 s for sensing LPG and NO₂ gases, respectively. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

83 K光系统Ⅱ核心复合物不同激发的荧光光谱学

在83 K低温下,利用稳态荧光光谱技术对光系统Ⅱ（PSⅡ）核心复合物中激发能的传递进行了研究,激励波长分别选择为436 nm,480 nm,495 nm和507 nm,得到4种波长激发下的稳态荧光光谱.经过比较发现其最大峰值所在的位置没有因激发波长的不同而发生改变,都在696 nm处,在不同激发波长下经过高斯解析获得不同的谱带.根据发射光谱与吸收光谱的对应性,反映了不同的光谱特性,说明在不同波长光的激发下,核心复合物中能量传递的途径不同.同时,可以分析出在核心复合物中,至少有Chl a670.4670,Chl a684.7,685.1683,Chl a689.0687,Chl a690.9,693.4,695.2,698.06904种Chl a组分参与了能量的传递.     

Nanometer Calibration Particles: What is Available and What is Needed?

Information on available polystyrene calibration spheres is presented regarding the particle diameter, uncertainty in the size, and the width of the size distribution for particles in a size range between 20 and 100nm. The use of differential mobility analysis for measuring the single primary calibration standard in this size range, 100nm NIST Standard Reference Material®1963, is described along with the key factors in the uncertainty assessment. The issues of differences between international standards and traceability to the NIST Standard are presented. The lack of suitable polystyrene spheres in the 20–40nm size range will be discussed in terms of measurement uncertainty and width of the size distributions. Results on characterizing a new class of molecular particles known as dendrimers will be described and the possibilities of using these as size calibration standards for the size range from 3 to 15nm will be discussed.