Determination of personal care products in water using UHPLC–MS after solid phase extraction with mesoporous silica‐based MCM‐41 functionalized with cyanopropyl groups

A silica‐based MCM‐41 mesoporous material functionalized with cyanopropyl groups has been synthesized by cocondensation, characterized and applied to preconcentrate six parabens and three UV filters in river and swimming‐pool waters. The analytes were quantified by ultra‐high performance liquid chromatography‐tandem mass spectrometry, according to the Directive 96/23/EC. Even though matrix effect was negligible, quantification in river water samples with the standard addition approach improved the recoveries obtained using solvent‐based and even with matrix‐matched calibration. The method quantification limits in river water samples were 0.05 ng/mL for 2,4‐dihydroxybenzophenone and 0.01 ng/mL for the rest. Recoveries, evaluated for a concentration level of 0.5 ng/L, were in the range 93.5‐107.6% for parabens and in the range 64.2‐85.8% for UV filters, with relative standard deviations intraday ≤10.2 and 10.8%, respectively. This parameter, evaluated for a concentration level of 0.1 ng/L, ranged between 98.3 and 110.4% for parabens and between 61.9 and 89.9% for UV filters, with relative standard deviation intraday ≤15.3 and 15.5%, respectively. The two UV filters with lower recoveries were the most affected by the addition of sodium chloride. River and swimming pool waters were analyzed and all the personal care products were found in the swimming pool water, whereas only methylparaben was detected in the river water.     

Magnesium hydroperoxyacetate (MHPA) and magnesium dihydroperoxide (MDHP): New antibacterial agents for fibrous substrates

Water-dispersable products have been prepared from the reaction of magnesium acetate tetrahydrate with hydrogen peroxide at mole ratios of 1 : 2 to 1 : 40 to produce compositions with active oxygen or peroxide contents of 1–30%. The products are believed to be stoichiometric mixtures of HOO Mg OAc and HOO Mg OOH that vary in composition with the molar ratios used. These new compounds are hydrolytically stable at ambient temperatures for extended periods (at least 60 days) and thermally stable below 300°C. Pad-cure processes are described for applying the above reaction products as a dispersion in water or aqueous hydrogen peroxide or as a foam in aqueous hydrogen peroxide to impart antibacterial activity to celulosics, synthetic fibers and fiber blends. The textiles are treated with dispersions or foam containing 10–17% of the reaction products derived from mole ratios of 1 : 2 to 1 : 40 magnesium acetate tetrahydrate: hydrogen peroxide. On subsequent heating for 2–4 min at 120–150°C, washing and drying, the modified textiles contain durably bound active oxygen or peroxide (0.1–1.7%) that has activity against representative gram-positive and gramnegative bacteria for up to 50 launderings.     

适用于雷达系统的高温超导窄带滤波器

对雷达系统,通过在接收前端安置高Q、窄带、高带外抑制的滤波器,可以有效减少信号间的干扰,由此可见高性能的滤波器对于雷达系统来说,具有重要作用.与常规滤波器相比,高温超导滤波器具有带边陡峭、插入损耗小、带外抑制高、可以设计极窄带等特点.在本文中,我们设计加工了一种高性能的12阶切比雪夫(Chebyshev)高温超导带通滤波器,其中心频率为1341兆赫兹、带宽为5.035兆赫兹,可用于雷达系统.在滤波器设计中,我们用Sonnet软件对滤波器进行了仿真计算.最后滤波器在以氧化镁为衬底的双面超导薄膜上制作,衬底直径为2英寸、厚度为0.5毫米.测试结果表明,该滤波器符合设计要求,具有很好的选择性和带外抑制.     

生晒参、全须生晒参中19种有机氯残留农药的毛细管气相色谱测定

建立了生晒参、全须生晒参中19种有机氯农药残留的毛细管气相色谱分析方法。对样品中六六六的4种异构体、滴滴涕的5种异构体、四氯苯胺、六氯苯、五氯硝基苯、七氯、五氯苯胺、艾氏剂、百菌清、环氧七氯、狄氏剂及异狄氏剂共19种有机氯农药的残留量进行了测定。以石油醚-丙酮混合物作为提取剂,样品采用索氏提取,提取液用弗罗里硅土柱层析净化。采用OV-1701石英毛细管气相色谱柱分离样品,ECD检测器进行检测。在3个水平添加时的回收率(n=5)分别为75.7%~96.1%、78.8%~111.6%和81.7%~115·2%;相对标准偏差分别为2.4%~10.6%、2.1%~9.8%和1.4~10.0%。方法用于生晒参和全须生晒参样品中农药残留的测定,结果满意。     

预辐射聚丙烯反应挤出接枝丙烯酸的研究

利用电子束(EB)预辐照方法和反应挤出技术制备了聚丙烯接枝丙烯酸共聚物PP-g-AA. 采用化学滴定、红外光谱、偏光显微镜(PLM)、DSC和广角X射线衍射(WAXD)对接枝产物进行了表征. 研究结果表明, 接枝率随辐照剂量增加而增大并逐渐达到平台值, 但随单体浓度增大而表现为线性增加, 接枝链能起到异相成核作用, 从而提高了结晶速率并细化了球晶. 同时, 熔体流动速率(MFR)和力学性能测试结果表明, 预辐射和挤出过程造成了PP严重降解, 据此可认为接枝反应主要发生在聚丙烯断裂分子链的末端.     

聚丙烯/纳米级金红石型二氧化钛/聚烯烃弹性体复合材料的抗老化性能研究

采用TEM和UV-Vis等测试手段表征了金红石型纳米级TiO2和体相TiO2的性能特征;通过熔融共混法分别制备了PP/纳米级TiO2/POE和PP/体相TiO2/POE复合材料,采用GB/T16422·2-1999所述的塑料实验室光源暴露实验方法,用氙灯气候试验机对纯PP和复合材料进行28天人工加速老化.结果表明,二氧化钛粒子在PP/POE基体中分散性良好,而纳米粒子对PP/POE基体具有增韧作用;改性后的两类复合材料均具有优异的抗老化性能,而PP/(1·0wt%)纳米级TiO2/POE复合材料的抗老化性能更加优异,其加速老化28天后的无缺口冲击强度达到80·45kJ·m-2,比纯PP提高4倍多,而同期加速老化28天后的PP/(1·0wt%)体相TiO2/POE复合材料的无缺口冲击强度只有47·88kJ·m-2;对纯PP老化过程中的羰基指数和冲击性能的变化情况进行了分析,发现二者近似成线性关系,其相关系数r在0·9以上.     

Improving signal-to-noise ratio for the forensic analysis of glass using micro X-ray fluorescence spectrometry

Micro X-ray fluorescence spectrometry (μXRF) is a standard technique used for the elemental analysis of glass fragments in forensic casework. The glass specimens encountered in casework are usually small (<1 mm), thin fragments that are partially transparent to the exciting X-ray beam. In addition to providing fluorescence from the small glass fragments, the primary beam X-rays can scatter within the chamber and provide noise in the measurements. To reduce scatter from the sample stage, the fragments are typically mounted on a thin plastic film and raised on an XRF sample cup (≤3 cm in height). However, at these heights, there may still be significant scatter from the sample stage, which adversely affects the signal-to-noise ratio (SNR) and the limit of detection (LOD). A plastic mount was designed and 3D-printed in-house to allow fragments to be raised as high as possible from the sample stage, thereby minimizing stage scatter. Most elements detected in glass showed an improvement in the SNR when using the 3D-printed mount for analyses. The greatest improvement (>30%) was observed for lower atomic number elements (Na and Mg) and higher atomic number elements (Sr and Zr). Another simple method to improve SNR is the use of primary beam filters; when using primary beam filters during analyses, elements with characteristic lines in the high-energy range (Rb, Sr, and Zr) showed the greatest improvement (>70%) in SNR. The impact of both strategies for the improvement of SNR is presented here.     

STRUCTURING ＆ RHEOLOGY OF MOLTEN POLYMER／CLAY NANOCOMPOSITES

The evolution and the origin of “solid-like state” in molten polymer/clay nanocomposites are studied. Using polypropylene/clay hybrid (PPCH) with sufficient maleic anhydride modified PP (PP-MA) as compatibilizer, well exfoliation yet solid-like state was achieved after annealing in molten state. Comprehensive linear viscoelasticity and non-linear rheological behaviors together with WAXD and TEM are studied on PPCH at various dispersion stages focusing on time,temperature and deformation dependencies of the “solid-like” state in molten nanocomposites. Based on these, it is revealed that the solid-structure is developed gradually along with annealing through the stages of inter-layer expansion by PP-MA,the diffusion and association of exfoliated silicate platelets, the formation of band/chain structure and, finally, a percolated clay associated network, which is responsible for the melt rigidity or solid-like state. The network will be broken down by melt frozen/crystallization and weakened at large shear or strong flow and, even more surprisingly, may be disrupted by using trace amount of silane coupling agent which may block the edge interaction of platelets. The solid-like structure causes characteristic non-linear rheological behaviors, e.g. residual stress after step shear, abnormal huge stress overshoots in step flows and, most remarkably, the negative first normal stress functions in steady shear or step flows. The rheological and structural arguments challenge the existing models of strengthened entangled polymer network by tethered polymer chains connecting clay particles or by chains in confined melts or frictional interaction among tactoids. A scheme of percolated networking of associated clay platelets, which may in band form of edge connecting exfoliated platelets, is suggested to explain previous experimental results.     

Comparative study of pretreatment methods for the determination of metals in atmospheric aerosol by electrothermal atomic absorption spectrometry

A comparative study of pretreatment methods for the determination of 10 elements (As, Cd, Pb, V, Ni, Mn, Cr, Cu, Fe, Al) in atmospheric aerosols by electrothermal atomic absorption spectrometry (ETAAS) was conducted. For the digestion of the particulates collected in filters, six methods were compared using a mixture of HNO₃ and HF with or without the addition of various oxidative agents (HClO₄ or H₂O₂) or acids (HCl). The comparative study was performed using loaded cellulose filter samples, which were digested in Parr bombs and heated in a conventional oven at 170 °C for 5 h. The extraction efficiency and blanks were compared and it was proved that the digestion method using only HNO₃–HF extracted most of the metals and gave the lowest blanks. The HNO₃–HF mixture was selected for the development of an improved microwave digestion method specific for aerosol-loaded filters. The operating parameters were optimized, so that quantitative recovery of the reference materials NIST 1649a urban dust and NIST 1648 urban particulate matter was achieved. The blank of cellulose and teflon filters were also determined and compared. Teflon filters present the lowest blanks for all the elements. The obtained limits of detection for each type of filters were adequate for environmental monitoring purposes. ETAAS instrumental operation was also optimized for the compensation and the elimination of interferences. The temperature optimization was performed for each metal in every type of filter and optimized parameters are proposed for 10 elements.     

聚丙烯/聚乙烯共混物的辐射凝胶生成动力学研究

本文研究辐照PP/HDPE共混物的溶胶生成分数s与辐照剂量R的关系,结果表明适用于某些纯聚合物辐射交联规律的Charlesby-Pinner关系式和陈-刘-唐关系式皆不适用于PP/HDPE共混体系。张万喜等人曾研究过许多纯聚合物的辐射交联,提出裂解度正比于R~β的假定,β是与高分子结构相关的参数,这个假定可与大多数聚合物的辐射交联实验数据符合。同样的假定被应用于本文的共混体系,不同的是根据共混物结构特点对R~β项进行了必要的修正,即共混物的R~β=∑f_iR~(βI),其中f_i,β_i分别为共混物第i组分的重量分数及β值。用修正后的R~β处理辐照PP/HDPE共混物的实验数据,R(s+√s)～R~β,有很好的线性关系。