Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone

A hydrophilic polymer, poly(N-vinyl-2-pyrrolidone), was tethered on the surface of polypropylene microfiltration membrane (PPMM) by UV photo-assisted and γ-ray pre-irradiation induced graft polymerizations. Results revealed that the γ-ray pre-irradiation graft polymerization was more efficient in view of the grafting degree. The chemical changes of the membrane surface were confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Pure water contact angle on poly(N-vinyl-2-pyrrolidone)-grafted PPMM decreased with the increase of grafting degree, which indicated an enhanced hydrophilicity for the modified membrane. Both bovine serum albumin adsorption and static platelets adhesion were measured to evaluate the bio-compatibility of the poly(N-vinyl-2-pyrrolidone)-modified PPMM. The statistical amounts of adsorbed bovine serum albumin and adhered platelets on unit membrane area decreased significantly, which to a certain degree demonstrated that the hemocompatibility of PPMM was improved. The N₂ permeability and the mean pore diameters of different PPMMs increased at first, then decreased after certain grafting degree. The changes of water flux followed a similar tendency. These indicated that at low grafting degree pore degradation induced by γ-ray irradiation had a major impact on permeability, while this was overcompensated by the grafted polymer at high grafting degrees.     

MEASUREMENTS OF CHAIN INTERPENETRATION OF POLYMER GLASSES

The concept of entanglement provides the basis of our current understanding of the flow behavior of polymer melts, Current techniques developed to investigate the degree of interpenetration of polymer chains only provide indirectly the information of the degree of entanglement in a relatively large scale （several to tens of nanometer）. In this article, we report ^1H-NMR spectroscopy with dipolar filters under fast magic angle spinning for probing chain interpenetration of polymer glasses at the molecular level.     

单向应力条件下松弛时间率相关的非线性粘弹性本构模型

基于单向拉伸实验研究和内变量理论 ,提出了一种新的简单的一维非线性粘弹性本构关系 .对两种粘弹性材料 ,即高密度聚乙烯和聚丙烯进行了不同加载速率作用下的拉伸实验研究 ,实验结果表明 ,两种材料的应力应变关系与加载速率相关 ;对材料的应力应变实验数据进行拟合发现 ,材料的松弛时间具有很强的应变率相关性 ,当应变率发生数量级变化时 ,材料的松弛时间也发生数量级的变化 .采用内变量理论 ,导出了在单轴应力条件下松弛时间率相关的非线性粘弹性本构关系的迭代形式 ,并给出其收敛条件 .当采取一次迭代形式时 ,本构关系退化为松弛时间率相关的Maxwell模型 .数值拟合的结果表明 ,一次迭代形式的本构关系就可以很好地拟合和预测实验结果 .     

Study and characterization of virgin and recycled LDPE/PP blends

Recycling of mixed plastic wastes composed of low-density polyethylene (LDPE) matrix and polypropylene (PP) was carried out by compounding using single-screw or twin-screw extruders. Blends of virgin polymers have been prepared to compare mechanical properties of both virgin and regenerated materials. First, a model composition of virgin LDPE/PP blend was prepared to study the effect of process parameters and that of different types of compatibilizers. Second, the results were applied to plastic wastes coming from industrial post-consumer plastic wastes. By adding compatibilizing agents such as ethylene-propylene-diene monomer, ethylene-propylene monomer, or PE-g-(2-methyl-1,3-butadiene) graft copolymer, elongation at break and impact strength were improved for all blends. The effect of these various copolymers is quite different and is in relation with their chemical structure. The recycled blends exhibit suitable properties leading to applications that require good mechanical properties.     

Blood cell separation using crosslinkable copolymers containing N,N‐dimethylacrylamide

Amphiphilic copolymers using hydrophilic N,N‐dimethylacrylamide (DMA), hydrophobic methyl methacrylate (MMA) and a crosslinkable monomer, 3‐methacryloyloxypropyl trimethoxysilane (MTSi), were synthesized and evaluated as coating materials for leukocyte removal filters for whole blood. When filters composed of non‐woven fabrics were coated with crosslinked synthesized copolymers, the elution ratios of the copolymers to water were adequately low because of the crosslinking with trimethoxysilane groups of MTSi units in the copolymers. Filters coated with crosslinked poly(DMA‐co‐MTSi) having a 0.96 mole fraction of DMA units showed a 0.35 ± 0.44% platelet permeation ratio and a logarithmic reduction of 4.0 ± 0.68 for leukocytes. On the other hand, an increase in the content of MMA units in the DMA‐containing copolymers improved the permeation ratio of the platelets dramatically. Filters coated with crosslinked poly(DMA‐co‐MMA‐co‐MTSi) containing a 0.39 mole fraction of MMA units and a 0.58 mole fraction of DMA units showed an 86 ± 3.0% platelet permeation ratio and a logarithmic reduction of 2.1 ± 1.2 for leukocytes. This indicates that an adequate content of hydrophobic monomer units, such as MMA units, is necessary for effective platelet permeation. Copyright © 2007 John Wiley & Sons, Ltd.     

The use of inverse gas chromatography to study surface thermal oxidation of polypropylene

Thermo-oxidative effects on the surface energy of polypropylene were measured by inverse gas chromatography as a function of exposure time and temperature. Unaltered polypropylene had a surface energy of 33 mJ/m². Oxidized polypropylene, after exposure to air at temperatures of 100 °C and 110 °C, had a range of maximum surface energies from 38 to 41 mJ/m². Comparisons between FTIR carbonyl peak growth and the surface energy showed that both methods detect oxidation, though the increase in surface energy is detected before the carbonyl peak growth is noticeable. The work of adhesion predicted by the surface free energies obtained in this work between a coated calcium carbonate and polypropylene changes by 10% due to the oxidation of the polymer at 110 °C.     

The melt elastic behavior of polypropylene/glass bead composites in capillary flow

The melt extrudate swell and entry pressure losses are important characteristics of elastic properties during die extrusion of polymeric fluids. They are usually expressed with die-swell ratio (B) and entry pressure drop (ΔP_o). In the present paper, the die-swell behavior and entrance pressure drop of a polypropylene (PP) filled with A-glass beads were investigated by using a Rosand capillary rheometer to identify the effects of the filler contents and extrusion rate on the elastic behavior of the sample melts. The experiments were carried out under the conditions with an apparent shear rate range of 50–10⁴ s⁻¹ and a temperature of 190 °C. The results showed that B increased nonlinearly with increasing shear rate at the wall (γ_w), and increased linearly with the increase of shear stress at the wall (τ_w). With the increase of the volume fraction of the fillers B decreased nonlinearly. Similarly, the entry pressure drop increased linearly with the increase of τ_w, whereas the influence of the filler concentration on ΔP_o was insignificant in this case. Furthermore, B increased as a linear function of ΔP_o, and extension stress (σ_e) increased nonlinearly with increasing γ_w.     

Lattice orientation within stirring-induced crystals of polyethylene

Micro-shish-kebab stirring-induced polyethylene crystals, as defined and described in the preceding paper, are flat, ribbon-shaped fibers. Selected area electron-diffraction techniques were used to determine the orientation of the crystal axes with respect to the external fiber shape. It has been shown that in addition to the crystal-lographic c-axis laying along the fiber direction, the normal to the ribbon plane is parallel to the crystallographic a-axis.     

Controlled Radical Polymerization

Various methods which lead to the control of molecular weight and polydispersities, and which allow for the preparation of block copolymers by radical polymerization are discussed. Thermal polymerizationof styrenes in the presence of stable radicals, polymerization of vinyl acetate and methyl methacrylate in the presence of chromium complexed by macrocyclic ligands polymerization of vinyl acetate initiated by organoaluminum compounds complexed by dipyridyl and activated by stable radicals, as well as in the presence of phosphites, are described in detail.     

INFLUENCE OF THERMAL TREATMENTS ON THE POLYMORPHISM IN STEREOIRREGULAR ISOTACTIC POLYPROPYLENE: EFFECT OF STEREO-DEFECT DISTRIBUTION

The influence of cooling rate from the melt on the polymorphism and crystallinity is investigated as a function of isotacticity and stereo-defect distribution in polypropylenes. Detailed analysis of wide angle x-ray diffraction patterns shows that crystallinity in the materials used is nearly independent of the experimental cooling rates (0.5–40°C/min). At high cooling rates, the materials exist mainly in the α-phase, whereas the amount of the γ-phase increases at the lower cooling rates. With an increasing amount of stereo-defects, this cooling-rate dependence of the polymorphism is enhanced. The effect of different stereo-defect distributions, as observed in metallocene-(random) and Ziegler–Natta (blocklike) derived isotactic polypropylenes, was investigated. The formation of the γ-phase is more prevalent in materials with a random defect distribution compared to the materials in which the stereo-defects have a blocklike distribution. The crystallinity decreases more rapidly as a function of the tacticity in the random defect-distributed materials.