The effect of slip in the flow of a branched PP melt: experiments and simulations

In this paper visualisation and direct velocity profile measurement experiments for a branched polypropylene melt in a 10:1 axisymmetric contraction demonstrate the onset of wall slip. Video processing of the flow shows the formation of vortices and their diminution with increasing flow rate. Numerical simulations using a multimode K-BKZ viscoelastic and a purely viscous (Cross) model—both of them incorporating a nonlinear slip law—were used to predict the flow kinematics and dynamics as well as to deduce the slip velocity function by performing fitting to the velocity profiles. It was found that the numerical predictions agree well with the experimental results for the velocity profiles, and vortex formation, growth and reduction. It is suggested that such experiments (visualisation of entrance flow and direct velocity profile measurement) can be useful in evaluating the validity of constitutive equations and slip laws in the flow of polymer melts through processing equipment.     

Insights into the Catalytic Activity of Nitridated Fibrous Silica (KCC‐1) Nanocatalysts from 15N and 29Si NMR Spectroscopy Enhanced by Dynamic Nuclear Polarization

Fibrous nanosilica (KCC‐1) oxynitrides are promising solid‐base catalysts. Paradoxically, when their nitrogen content increases, their catalytic activity decreases. This counterintuitive observation is explained here for the first time using ¹⁵N‐solid‐state NMR spectroscopy enhanced by dynamic nuclear polarization.     

Fracture toughness assessment of polypropylene random copolymer with multiple stress modes using the essential work of fracture theory

In recent years, the essential work of fracture (EWF) method has been extensively employed for assessing a material's toughness by specific essential fracture work, especially for polymers showing ductile failure. However, most research has studied either the in-plane stress mode or the out-of-plane stress mode. To obtain a more in-depth understanding of the EWF theory, the specific essential and non-essential fracture work of polypropylene random copolymer (PP-R) was investigated in both in-plane stress mode and out-of-plane stress mode. The effects of ligament length, amount of pre-cracking and pre-cracking method on the specific essential and non-essential fracture work were explored. The specific essential fracture work obtained in both stress modes is compared and discussed.     

Influence of polymer reprocessing cycles on the microstructure and rheological behavior of polypropylene/mineral oil oleogels

The overall objective of this work was to study the effect of reprocessing cycles of isotactic polypropylene (PP) on the rheological behavior and microstructure of gel-like dispersions in mineral oil. PP was subjected to 10 reprocessing cycles and oleogel samples were further prepared by using the mixing rheometry technique and characterized from a rheological point of view and polarized light optical microscopy (PLOM). Recycled polymer samples were also characterized by means of rheological measurements, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate the property changes induced by reprocessing. The values of different linear viscoelastic functions (elastic modulus and complex viscosity) of recycled PP decrease with the number of reprocessing cycles, which influences oleogel rheological response. An empirical exponential correlation between the storage modulus (G′) of PP samples and the plateau modulus ($G_N^o$) of oleogels has been proposed to predict the rheological behavior of oleogels. Results were explained considering the scission of PP chains induced by the thermomechanical reprocessing treatment applied.     

Flame-retardant Wrapped Ramie Fibers towards Suppressing “Candlewick Effect” of Polypropylene/Ramie Fiber Composites

In this work, a flame-retardant polypropylene(PP)/ramie fiber(RF) composite was prepared. The ramie fibers were wrapped chemically by a phosphorus- and nitrogen-containing flame retardant(FR) produced via in situ condensation reaction so as to suppress their candlewick effect. Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS) and scanning electron microscopy(SEM) demonstrated that the ramie fibers wrapped chemically by FR(FR-RF) were obtained successfully. Thermogravimatric test showed that the PP/FR-RF composite had more residue and better thermal stability at high temperatures than the PP/RF composite. Cone calorimeter(CC) results indicated that the peak of heat release rate(PHRR) and total heat release(THR) correspondingly decreased by 23.4% and 12.5% compared with the values of neat PP/RF. The PP/FR-RF composite created a continuous and compact char layer after the combustion. Combining FTIR analysis of char residue after CC test with heat conduction coefficient results, it could be concluded that the charring of FR on RF greatly weakened the candlewick effect of RF, and more char residue in the RF domain facilitated the formation of more continuous and compact char layer in the whole combustion zone, consequently protected PP composites during combustion, resulting in the better flame retardancy of PP/FR-RF composite than that of PP/RF composite.     

Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing

In this work, the effects of annealing conditions on the microstructure of polypropylene(PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD, FTIR, DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature, while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results, the permeability of the membranes increased with annealing temperature. On the other hand, it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability.     

含铵根离子等规聚丙烯离聚体的合成及性能研究

合成了一系列高分子量、窄分子量分布且高等规度,含有不同―NR_3~+X~-离子基团含量的聚丙烯离聚体(iPP-NR_3~+X~-).以PP/IUD共聚物作为反应中间体,与三乙胺或N-甲基咪唑氨化得到聚丙烯离聚体.通过离子交换反应制备不同反离子的N-甲基咪唑聚丙烯离聚体,包括双三氟甲基磺酰亚胺根离子(Tf_2N~-)、四氟硼酸根离子(BF_4~-)和六氟磷酸根离子(PF_6~-).热重分析结果发现N-甲基咪唑聚丙烯离聚体的热稳定性明显优于三乙胺聚丙烯离聚体,表明不含β-H的N-甲基咪唑聚丙烯离聚体具有较高的热稳定性.同时,聚丙烯离聚体的表面亲水性得到明显改善.并且,聚丙烯离聚体的断裂伸长率也得到显著提高,最高达到900%.比较不同反离子聚丙烯离聚体的屈服强度和断裂强度发现I~-聚丙烯离聚体具有最优的力学性能.     

Nonisothermal crystallization behavior of isotactic polypropylene/ thermoplastic rubber blends

The morphology and crystallization behavior of blends of polypropylene (PP) and an ethylene-based thermoplastic elastomer (TPO) were investigated by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The SEM images showed a two-phase morphology for these blends. As TPO was partially crystalline, two distinct peaks were observed in both heating and cooling scans of DSC. The crystallization temperature of TPO in blends was higher than pure TPO. In contrast, the crystallization temperature of PP in blends was lower than pure PP. The crystallization behavior of blends was modeled by Avrami equation. It was observed that the presence of TPO accelerated the growth rate of crystals of PP in PP/TPO blends.     

Stability of Plates Made of Fibrous Composite with Damageable Components

The bifurcation stability problem for rectangular plates made of fibrous composite with damageable matrix is formulated and solved__________Translated from Prikladnaya Mekhanika,Vol. 41, No. 5, pp. 83–90, May 2005.     

Structure of the constitutive relations for hereditarily elastic materials reinforced by hard fibers

The problem of simplifying the nonlinear hereditary elasticity relations is considered for strongly anisotropic materials such as fiber-reinforced composites. This is done using their property that the material stiffness is high along the reinforcement and is low in the cross-sectional direction. The material is considered transversally isotropic. The simplification is performed by analyzing asymptotic representations of creep relations. Relations of various degrees of accuracy for various types of composites and stress states are obtained. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 3, pp. 120–127, May–June, 2005.