Mechanical degradation of filter polymer materials: Polyphenylene sulfide

Polyphenylene sulfide (PPS) is known as a material resistant to high temperature and chemicals; however, there are arguments on the durability of PPS non-woven fabrics to chemicals, such as nitric acid (HNO₃), sulfuric acid (H₂SO₄), and hydrochloric acid (HCl). Therefore, this work aims at investigating the degradation of PPS non-woven fabrics in HNO₃, H₂SO₄ and HCl, and at confirming acid durability of PPS non-woven fabrics. In addition, this paper also studies the interaction among these three acids by measuring the retention of strength in binary or tertiary mixtures of these three acids. A discussion has been made on the acceleration/retardation of PPS degradation by the interactive effects, and also on the chemistry related to the degradation by these acids. Furthermore, there is a linear relationship between the nitric acid concentration and the proportion of carbon in the remaining PPS structures after 100 h of acid exposure. Also, this proportion of carbon is a good indicator of the retained strength in PPS fabrics.     

外电场作用下寡聚苯分子导线的性质

利用Hartree-Fock 方法在6-31G*水平上对聚苯分子进行了计算研究. 分别从几何构型、分子轨道空间分布和分子轨道能级三个方面讨论了外电场对寡聚苯分子导线的影响, 给出了分子导线的性质与外电场的关系. 进一步, 连接硫原子于聚苯分子的两端, 并共价结合在金电极上. 利用非平衡格林函数方法对其在0-2.0 V 偏压下电子输运特征进行了深入研究.     

The Synthesis and the X‐Ray Structure of 1,4‐Bis(2‐{4‐[2‐(4‐methylthiophenyl)ethynyl]phenyl}ethynyl)‐2,5‐dihexyloxybenzene

The synthesis and the single crystal structure of the title compound (I), C₅₂H₅₀O₂S₂, consisting of five benzene rings and four carbon‐carbon triple bonds and with methylthio groups at both ends were described. The distance, according to the X‐ray data, between the two ended sulfur atoms of compound (I) was close to the calculated value from Spartan'04//Hartree‐Fock//3–21G(*). The dihedral angle between the adjacent two benzene rings in this linear conjugated molecule is about 17°.     

Polymers with alternating anthracene and phenylene building blocks linked by ethynylene and/or vinylene units: Studying structure‐properties‐relationships

Four conjugated polymers ( P1 – P4 ) consisting of alternating anthracene‐9,10‐diyl and 1,4‐phenylene building blocks connected via ethynylene as well as vinylene ( P1 and P2 ), ethynylene‐only ( P3 ), and vinylene‐only ( P4 ) moieties, respectively, were synthesized and studied. The phenylene units in all four polymers bear 2‐ethylhexyloxy side‐chains to promote good solubility. The three polymers with vinylene units ( P1 , P2 , and P4 ) were prepared using the Horner–Wadsworth–Emmons reaction. For the synthesis of the arylene‐ethynylene polymer P3, the palladium‐catalyzed Sonogashira cross‐coupling reaction was used. The polymers were characterized by NMR, Fourier transform infrared spectroscopy, and Raman spectroscopy. Photophysical, absorption and photoluminescence, and electrochemical properties were studied. Spectroscopic ellipsometry measurements were performed to gain more insight on the optical properties. In addition, the transport properties were investigated using admittance spectroscopy. The bulk hole mobility and its dependence on the electric field were evaluated for P1 and P2 . © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 129–143     

Synthesis,structure, and optical properties of an alternating calix[4]arene‐based meta‐linked phenylene ethynylene copolymer

Novel alternating copolymers comprising bis‐ calix[4]arene‐p‐phenylene ethynylene and m‐phenylene ethynylene units ( CALIX‐m‐PPE ) were synthesized using the Sonogashira‐Hagihara cross‐coupling polymerization. Good isolated yields (60–80%) were achieved for the polymers that show M_n ranging from 1.4 × 10⁴ to 5.1 × 10⁴ gmol^?1 (gel permeation chromatography analysis), depending on specific polymerization conditions. The structural analysis of CALIX‐m‐PPE was performed by ¹H, ¹³C, ¹³C–¹H heteronuclear single quantum correlation (HSQC), ¹³C–¹H heteronuclear multiple bond correlation (HMBC), correlation spectroscopy (COSY), and nuclear overhauser effect spectroscopy (NOESY) in addition to Fourier transform‐Infrared spectroscopy and microanalysis allowing its full characterization. Depending on the reaction setup, variable amounts (16–45%) of diyne units were found in polymers although their photophysical properties are essentially the same. It is demonstrated that CALIX‐m‐PPE does not form ground‐ or excited‐state interchain interactions owing to the highly crowded environment of the main‐chain imparted by both calix[4]arene side units which behave as insulators inhibiting main‐chain π–π staking. It was also found that the luminescent properties of CALIX‐m‐PPE are markedly different from those of an all‐p‐linked phenylene ethynylene copolymer ( CALIX‐p‐PPE ) previously reported. The unexpected appearance of a low‐energy emission band at 426 nm, in addition to the locally excited‐state emission (365 nm), together with a quite low fluorescence quantum yield (? = 0.02) and a double‐exponential decay dynamics led to the formulation of an intramolecular exciplex as the new emissive species. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

带内取向柔性多醚链苯炔大环合成

采用分子间Glaser半环闭环法合成了带内取向柔性多醚链的苯炔大环.用1H NMR,13C NMR,HRMS,UV及PL(photduminescence)确证了目标大环结构,凝胶色谱测定了目标大环纯度.经偏光显微镜(POM)和差热分析仪(DSC)测试表明大环没有呈现预期的液晶性质,可能是由于环内柔性链过于拥挤,不能形成与环平面共面结构,以至于难于进行有序堆积的缘故.     

Aggregation-induced emission enhancement in poly(phenylene-ethynylene)s bearing aniline groups

Poly(phenylene ethynylene)s(P1) with 4-vinylaniline pendant groups were successfully prepared by the Sonogashira coupling polymerization between l,4-diethynyl-2,5-bis(pentyloxy)benzene and 4-[2-(2,5-dibromophenyl)vinyl]-aniline. In comparison with its analogue P2 without amino group,the emission of P1 is only enhanced by aggregation when adding n-hexane into its THF solution,exhibiting an aggregation-induced emission enhancement(AIEE) effect.When methanol or water instead of hexane was added into THF solution,P1,however,didn’t show AIEE.The results indicated that amino groups strengthen the inter-chain and intra-chain interactions in P1 and restrict the non-radiative energy transition. This strategy can provide a platform for developing highly sensitive and efficient bio- and chemosensors.     

Research Deyelopment of Composite Coating of Polyphenylene Sulfide and Polytetrafluroethylene

聚苯硫醚、聚四氟乙烯均是耐高温、耐腐蚀的树脂,同时聚四氟乙烯有极低表面能,而聚苯硫醚与金属有良好结合力,结合二者的优点,有望制备出集合耐腐蚀、耐高温、超疏水等优异性能为一体的功能涂层,因此以聚苯硫醚、聚四氟乙烯为主要原料的复合涂料自1992年以来便倍受关注。本文从聚苯硫醚、聚四氟乙烯各自的性能出发,综述了聚苯硫醚／聚四氟乙烯复合涂层三种不同制备工艺：分层涂覆、共混涂覆、梯度涂覆;详细说明了涂层的五大优异性能：耐腐蚀性、超疏水性能、阻垢性能、耐高温性以及耐磨性能,最后本文还描述了聚苯硫醚／聚四氟乙烯复合涂层的广阔应用前景。     

5，8-二呋喃基萘基喹喔啉与对苯撑乙炔交替共聚物的合成及其性能

利用Stille耦合反应合成了新型单体5,8-二呋喃基萘基喹喔啉,溴化后与不同长链烷氧基侧链的对苯撑乙炔共聚,合成了聚[2,5-二（辛氧基）-1,4苯撑乙炔撑-5,8-二（呋喃基）萘基喹喔啉]（PⅠ）和聚[2,5-二（十二烷氧基）-1,4-苯撑乙炔撑-5,8-二（呋喃基）萘基喹喔啉]（PⅡ）。通过FT—IR、1H—NMR等手段对单体和共聚物的结构进行了表征,采用紫外-可见吸收光谱、荧光发射光谱和循环伏安法对聚合物的光、电性能进行了探讨。结果表明：单体和共聚物PⅠ、PⅡ在长波处的紫外-可见吸收峰分别为435、418、423nm,相应的荧光发射峰分别为551、589、579nm。2种共聚物均在1．54V处出现氧化峰,无相应的还原峰。