Photopolymerization of enzymatically synthesized methacrylated poly(caprolactone) with poly(ethylene glycol) macromonomer

Polycaprolactone (PCL) based α,ω-methacrylated macromonomer (DMPCL) was synthesized via enzymatic ring-opening polymerization (eROP) by using Novozyme 435 as the enzyme immobilized catalyst. DMPCL was further photopolymerized with monofunctional poly(ethylene glycol) methyl ether methacrylate (PEGMA-950) macromonomer and trimethylolpropane triacrylate (TMPTA) as tri-functionalized crosslinking agent in glass vials when CHCl₃ was the solvent and Irgacure 819 was the photoinitiator. Ultraviolet (UV) Light Emitting Diode (LED) bulbs enabled photoinduced reactions at room temperature with low heat generation and high reaction efficiency. The obtained gels were characterized with Fourier Transform Infrared Spectroscopy (FT-IR) and Differential Scanning Calorimetry (DSC). DMPCL participated as an effective crosslinking agent in the photopolymerization of PEGMA-950. Combined usage of DMPCL and PEGMA-950 resulted in significantly more effective polymerization than the separate photopolymerizations of these macromonomers.     

Photoinitiated polymerization of methacrylates comprising phenyl moieties

Investigation of photopolymerization kinetics of 4-(4-methacryloyloxyphenyl)-butan-2-one (1) in comparison with 2-phenoxyethyl methacrylate (2) and phenyl methacrylate (3) using a UV-LED emitting at 395 nm shows significantly faster polymerization of 1 compared to both 2 and 3 at 40°C. Vitrification affects photopolymerization kinetics of all methacrylates under investigation. Interestingly, quantitative final conversion is observed during photoinitiated polymerization of 1 and 2 whereas 3 shows limited conversion at about 80%. Furthermore, higher degree of polymerization is obtained by photoinitiated polymerization of 1 compared to 2 and 3. This shows that the 3-oxobutyl substituent at the phenyl ring of 1 significantly affects both polymerization kinetics and final conversion of the photoinitiated polymerization. Moreover, an additional higher molecular weight fraction is observed in case of polymerization of 1 at 85°C that is above the glass transition temperature of the polymer formed during photoinitiated polymerization. As a thermal polymerization at 85°C in the absence of light results in a high molecular weight polymer as well, an additional thermal process may be discussed as reason for the higher molecular weight polymer fraction in case of the photopolymer made at 85°C.     

On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II

In this paper an inclined edge cracked short beam specimen subjected to symmetric three-point bend loading was designed and examined for conducting mixed-mode I/II fracture toughness experiments. The aspect ratio (i.e. length to width ratio) and the loading span distance are considered much lower than the other conventional cracked bend beam samples. Crack tip parameters such as stress intensity factors and T-stress were computed numerically for this specimen by several finite element analyses and it was demonstrated that the specimen is able to produce full combinations of mode I and II including pure mode II. The practical capability of the short bend beam specimen was studied experimentally by conducting a set of mixed-mode fracture tests on PolymethylMethacrylate (PMMA) as a well-known model brittle material. The critical stress intensity factors, the direction of fracture kinking and the path of fracture trajectory were investigated both experimentally and theoretically using two stress and strain-based fracture criteria. The fracture toughness of tested PMMA was decreased by moving towards mode II case due to the effect of T-stress on the fracture mechanism of the short bend beam specimen.     

Novel study on the liquid crystalline behavior of poly(methacrylate)s with biphenyl side groups

We report the synthesis and characterization of a series of liquid crystalline polymers substituted with the 4′-methoxybiphenyl-4-yloxy group. The spacer length is varied from 4–8 methylene units. The materials are characterized by polarized light microscopy, differential scanning calorimetry, and X-ray analysis. All homologues show highly ordered phases. Additionally, the butylene polymer shows a broad nematic mesophase. For the first time, the narrow nematic phase of the hexylene homologue could be confirmed experimentally. X-ray analysis of the polymers made exact assignments of the low temperature phases possible, thus giving access to the analysis of the arrangement of the mesogenes within the layers. The pentylene homologue shows a distinct deviation from the behavior of the other polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2669–2679, 1998     

Chemical surface modifications of microfibrillated cellulose

Microfibrillated cellulose (MFC) was prepared by disintegration of bleached softwood sulphite pulp through mechanical homogenization. The surface of the MFC was modified using different chemical treatments, using reactions both in aqueous- and organic solvents. The modified MFC was characterized with fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Epoxy functionality was introduced onto the MFC surface by oxidation with cerium (IV) followed by grafting of glycidyl methacrylate. The length of the polymer chains could be varied by regulating the amount of glycidyl methacrylate added. Positive charge was introduced to the MFC surface through grafting of hexamethylene diisocyanate, followed by reaction with the amines. Succinic and maleic acid groups could be introduced directly onto the MFC surface as a monolayer by a reaction between the corresponding anhydrides and the surface hydroxyl groups of the MFC.     

AGET ATRP of methyl methacrylate with poly(ethylene glycol) (PEG) as solvent and TMEDA as both ligand and reducing agent

Activator generated by electron transfer atom transfer radical polymerization of methyl methacrylate (MMA) in inexpensive, non-toxic poly(ethylene glycol) (PEG), with air-stable Cu(II)X₂(X = Br, Cl) as the catalyst and N,N,N′,N′-tetramethylethylenediamine (TMEDA) as both ligand and reducing agent was investigated. The polymerizations in PEG proceeded in a well-controlled manner as evidenced by kinetic studies and chain extension results. The polydispersity of the polymer obtained was quite narrow, with a weight-average molecular weight/number-average molecular weight ratio of less than 1.2. Effects of the TMEDA content and the catalysts on polymerization were also investigated, respectively.     

Variation of anions in layered double hydroxides: Effects on dispersion and fire properties

Layered double hydroxides (LDHs) are interesting materials for nanocomposite formation because one can vary the identity of the metals, the anions and the stoichiometry to see the effect of these on the ability of the nano-material to disperse in a polymer and to see what effect dispersion has on the properties of the polymer. In this study, the anions 2-ethylhexyl sulfate (SEHS), bis(2-ethylhexyl) phosphate (HDEHP) and dodecyl benzenesulfonate (SDBS) have been utilized as the charge balancing anions to synthesize organo-LDHs. Nanocomposites of poly(methyl methacrylate) (PMMA) and polystyrene (PS) with organo-LDHs were prepared both by melt blending and bulk polymerization. X-ray diffraction and transmission electron microscopy were used to characterize the morphology of the nanocomposites while the thermal stability and fire properties of nanocomposites were studied by thermogravimetric analysis and cone calorimetry; the mechanical properties are also investigated. In general, it is easier to disperse these organo-LDHs in PMMA than in PS, but the sulfate cannot be dispersed at the nanometer level in either material. The addition of these organo-LDHs does not affect the mechanical properties. The best fire properties are obtained with the sulfonate LDH, SDBS; the reduction in the peak heat release rate is almost 50% for both polymers.     

Structure Characterization and Thermal Properties of PMMA／Montmorillonite Nanocomposites via Emulsion Polymerization

Montmorillonite(MMT) modified with sodium silicate can change the arrangement of its layers fromedge-face and edge-edge to face-face. With the fine dispersion of the modified MMT in water, the cation-ex-change reaction was carried out with cetyltrimethyl ammonium bromide (CTAB) to obtain organo-montmoril-lonite (OMMT). As OMMT was uniformly dispersed in methyl methacrylate (MMA) monomer, PMMA/OMMT nanocomposites were formed via a common emulsion polymerization. The products were extractedwith hot acetone and characterized by FTIR, molecular weight, X-ray diffraction(XRD), transmission elec-tron microscopy(TEM), DSC and TGA. These results show that most of the OMMT layers have been exfo-liated, while the thermal stability is increased obviously. By means of FTIR spectral analysis, the ratios ofthe macromolecular radicals‘ termination of disproportionation patterns to combination are increased with theaddition of OMMT. This result further confirms the increase of the thermal degradation temperatures andglass transition temperatures of the PMMA/OMMT nanocomposites.     

Synthesis of Poly(methyl methacrylate) Nanosize Particles by Differential Microemulsion Polymerization

Poly(methyl methacrylate) nanosize particles were synthesized by a differential microemulsion polymerization process. Sodium dodecylsulfate and ammonium persulfate were used as the surfactant and initiator, respectively. The effects of reaction conditions on the particle size have been investigated. A particle size of less than 20 nm in diameter has been achieved with surfactant/monomer and surfactant/water weight ratios of 1:18 and 1:120, i.e. much milder conditions than those previously reported in the literature.

TEM image of nanoparticles prepared via differential microemulsion polymerization.     

甲基丙烯酸三丁基锡酯与甲基丙烯酸甲酯共聚物的分子量测定和K、α值的订定

甲基丙烯酸三丁基锡酯与甲基丙烯酸甲酯共聚物的分子量测定和K、α值的订定