Application of vibrational spectroscopy techniques for material identification from fire debris

The primary goal of this research is to demonstrate the use of vibrational spectroscopy techniques as a tool for the identification of materials post fire. This paper discusses the use micro-Raman spectroscopy and ATR-FTIR to identify materials found in fire debris. The polymeric materials under study were high density and low density polyethylene (HDPE and LDPE), polyvinyl chloride (PVC), polymethyl methacrylate (PMMA) and cotton. These are commonly materials found in households around the world, their identification from the debris provides useful forensic information on the spatial distribution of fuels in a fire compartment, thus allowing for accurate analysis and modelling. Earlier work has established Raman spectroscopy to be a very good tool for material identification post fire. The addition of ATR-FTIR spectroscopy as a technique in developing this novel tool for identification of materials post fire has established vibrational spectroscopy in the area of fire investigation. This study indicated that the limitations associated with Raman spectroscopy in post fire identification, could be made insignificant by the strengths of ATR-FTIR spectroscopy and vice versa. To further establish the validity of this identification process principal component analysis was used to discriminate between the spectrum of the burnt materials and an error analysis computed. Both techniques demonstrated that identification could be done with very minimal confusion between the materials studied.     

β-CYCLODEXTRIN REGULATED STEREOREGULARITY AND MOLECULAR WEIGHT IN INCLUSION POLYMERIZATION OF ACRYLONITRILE

Polyacrylonitrile (PAN) polymers were prepared by inclusion polymerization of the monomer using various molar equivalents of β-cyclodextrin (β-CD). Stereoregular (isotactic, atactic and syndiotactic) distributions of the prepared PAN polymers were determined from terminal model Bernoullian statistics using ¹³C-NMR data. With an increase in acrylonitrile (AN): β-CD ratios, the proportion of isotactic polymers increased. Also, T_g increased along with degradation temperature at higher AN: β-CD ratios. However, molecular weight of the polymers prepared was lower at an AN: β-CD ratio of 10:1, but was found to be larger than the control at an AN: β-CD ratio of 20:1.     

Metal-like Charge Transport in PEDOT(OH) Films by Post-processing Side Chain Removal from a Soluble Precursor Polymer

Herein, a route to produce highly electrically conductive doped hydroxymethyl functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) films, termed PEDOT(OH) with metal-like charge transport properties using a fully solution processable precursor polymer is reported. This is achieved via an ester-functionalized PEDOT derivative [PEDOT(EHE)] that is soluble in a range of solvents with excellent film-forming ability. PEDOT(EHE) demonstrates moderate electrical conductivities of 20–60 S cm⁻¹ and hopping-like (i.e., thermally activated) transport when doped with ferric tosylate (FeTos₃). Upon basic hydrolysis of PEDOT(EHE) films, the electrically insulative side chains are cleaved and washed from the polymer film, leaving a densified film of PEDOT(OH). These films, when optimally doped, reach electrical conductivities of ≈1200 S cm⁻¹ and demonstrate metal-like (i.e., thermally deactivated and band-like) transport properties and high stability at comparable doping levels.     

An n-Type Polythiophene Derivative with Excellent Thermoelectric Performance

Typical n-type conjugated polymers are based on fused-ring electron-accepting building blocks. Herein, we report a non-fused-ring strategy to design n-type conjugated polymers, i.e. introducing electron-withdrawing imide or cyano groups to each thiophene unit of a non-fused-ring polythiophene backbone. The resulting polymer, n-PT1 , shows low LUMO/HOMO energy levels of −3.91 eV/−6.22 eV, high electron mobility of 0.39 cm² V⁻¹ s⁻¹ and high crystallinity in thin film. After n-doping, n-PT1 exhibits excellent thermoelectric performance with an electrical conductivity of 61.2 S cm⁻¹ and a power factor (PF) of 141.7 μW m⁻¹ K⁻². This PF is the highest value reported so far for n-type conjugated polymers and this is the first time for polythiophene derivatives to be used in n-type organic thermoelectrics. The excellent thermoelectric performance of n-PT1 is due to its superior tolerance to doping. This work indicates that polythiophene derivatives without fused rings are low-cost and high-performance n-type conjugated polymers.     

Emerging Materials for Interfacial Solar-Driven Water Purification

Solar-driven water purification is considered as an effective and sustainable technology for water treatment using green solar energy. One major goal for practical applications is to improve the solar evaporation performance by the design of novel photothermal materials, with optimized heat localization and water transport pathways to achieve reduced energy consumption for water vaporization. Recently, some emerging materials like polymers, metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and also single molecules were employed to construct novel solar evaporation systems. In this minireview, we present an overview of the recent efforts on materials development for water purification systems. The state-of-the-art applications of these emerging materials for solar-driven water treatment, including desalination, wastewater purification, sterilization and energy production, are also summarized.     

Synchronously Manipulating Absorption and Extinction Coefficient of Semiconducting Polymers via Precise Dual-Acceptor Engineering for NIR-II Excited Photothermal Theranostics

Integrating the ultralong excitation wavelength, high extinction coefficient, and prominent photothermal conversion ability into a single photothermal agent is an appealing yet significantly challenging task. Herein, a precise dual-acceptor engineering strategy is exploited for this attempt based on donor-acceptor (D-A) type semiconductor polymers by subtly regulating the molar proportions of the two employed electron acceptor moieties featuring different electronic affinity and π-conjugation degrees, and making full use of the active intramolecular motion-induced photothermal effect. The optimal polymer SP4 synchronously shows desirable second near-infrared (NIR-II) absorption, an extremely high extinction coefficient, and satisfactory photothermal conversion behavior. Consequently, the unprecedented performance of SP4 NPs on 1064 nm laser-excited photoacoustic imaging (PAI)-guided photothermal therapy (PTT) is demonstrated by the precise tumor diagnosis and complete tumor elimination.     

Conformational Kinetics in Chiral Poly(diphenylacetylene)s: A Dynamic P/M Memory Effect

Dynamic P/M (plus/minus) helical memory in chiral dissymmetric poly(diphenylacetylene)s (PDPA) is shown using a PDPA that bears the benzamide of (L)-alanine methyl ester as pendant. For a single chiral polymer, it is possible to obtain either P or M helical structures in a specific solvent without the presence of any chiral external stimuli. To do that, it is necessary to combine the conformational control at the pendant group with a high steric hindrance at the backbone. In this case, by thermal annealing in low-polar solvents, an anti-conformer is stabilized at the pendant which commands a P helix in the PDPA. Next, solvent removal followed by addition of a polar solvent such as dimethyl sulfoxide (DMSO), results in the kinetic conformationally trapped P helix. However, in this medium, the preferred handedness and the thermodynamic macromolecular helix for poly-(L)- 1 is M. This process also occurs in the opposite way. Electronic circular dichroism (ECD) and circularly polarized luminescence (CPL) studies show that the dynamic memory effect is present both in ground and excited states.     

Frontispiece: The Effect of the Axle End Structure and Number of Through-Space Bonds on the Properties of Rotaxane Crosslinked Polymers

A rotaxane crosslinker (RC) is known to toughen the resulting rotaxane crosslinked polymer (RCP) via a stress dispersion effect that is attributed to the movable nature of the crosslinking structure. To evaluate this toughening mechanism in detail, a series of structure-definite RCs equipped with different axle end structures or different numbers of wheel components were synthesized, and subjected to free radical polymerization with a vinyl monomer to obtain RCPs. Analyses of the obtained RCPs revealed that the size of the axle end structure should be well-balanced to produce a strong toughening effect, and a [3]rotaxane crosslinker works more effectively than [2]rotaxane to toughen RCPs. The mobility of the crosslinking points, in terms of rotational and flipping movements, was more crucial to toughening the RCP than that of translational movement along the axle. The first observation of the above crucial findings proved the utility of the systematic molecular design used in this study.     

合成聚合物在手性分离中的应用进展

介绍了合成聚合物在手性分离中的应用,合成聚合物包括：包含有环糊精的聚合物、包含有冠醚的聚合物、聚丙烯酰胺衍生物、聚甲基丙烯酸酯衍生物、聚表面活性剂等。共引用文献44篇。     

8—羟基喹啉的高分子化及其应用展望

综述了８－羟基喹啉的各种高分子化方法,介绍了其在分析,环境,材料等领域中的应用情况,并展望了其在有机电致发光领域和导电聚合物等领域中的应用前景,提出了一些与之相关的值得深入研究的问题。