Three New Iron(II) Thiocyanato Coordination Polymers Based on 4,4′‐Bipyridine as Ligand and the Influence of Methanol on Their Structures

Reaction of iron(II) thiocyanate with 4,4‐bipyridine (bipy) in methanol leads to the formation of three new solvates of different composition depending on the reaction conditions: At room temperature two new ligand‐rich 1:2 (1:2 = ratio between metal and N‐donor ligand) polymorphic forms [Fe(NCS)₂(bipy)₂ · 2MeOH]_n ( 1I ) and [Fe(NCS)₂(bipy)(MeOH)₂ · (bipy)]_n ( 1II ) are obtained, whereas solvothermal conditions leads to the formation of the new ligand‐deficient 1:1 compound [{Fe(NCS)₂(bipy)(MeOH)}₂]_n ( 2 ). All crystal structures were determined by X‐ray single crystal structure analysis. In the crystal structure of modification 1I the metal atoms are coordinated by four bridging bipy ligands, which connect them into layers. The methanol molecules occupy voids in the structure. Compared to 1I in modification 1II the crystal structure contains of linear Fe–bipy–Fe chains, which are further connected by hydrogen bonds between coordinating MeOH and noncoordinated bipy ligands into layers. The ligand‐deficient 1:1 compound 2 shows a completely different coordination topology with linear Fe–bipy–Fe chains, which are connected by coordinating methanol molecules into double‐chains. In all compounds the thiocyanato anions are terminal N‐bonded to the metal atoms. Investigation of the thermal behavior of compound 1I shows a two‐step decomposition, in which ligand‐deficient intermediates are formed. Magnetic measurements on 1I reveal Curie–Weiss paramagnetism with increasing antiferromagnetic interactions on cooling.     

Novel and highly sensitive mixed-polymeric electrokinetic chromatography system for determination of contaminants and impurities of heparin samples

A mixed‐polymeric electrokinetic chromatography system has been developed for the simultaneous determination of a contaminant like oversulfated condroitin sulfate (OSCS) and impurities expressed as dermatan (Der) in heparin (Hep) samples. The EKC system consisted of 0.5% w/v polymeric β‐CD, 0.4% w/v tetronic^® 1107 and 400 mM tris‐phosphate buffer at pH 3.5. The optimized electrophoretic conditions included the use of an uncoated‐silica capillary of 50 cm of total length and 75 μm id, an applied voltage of ?7 kV, a temperature of 30°C and 200 nm UV‐detection. The highly sensitive method developed showed low values of LOD, 0.07% w/w (0.07 μg/mL) (OSCS) and 0.1% w/w (0.1 μg/mL) (Der), and values of LOQ 0.2% w/w (0.2 μg/mL) (OSCS) and 0.3% w/w (0.3 μg/mL) (Der) with a concentration level of Hep sample as low as 0.1 mg/mL. Additional parameters of validation such as specificity, linearity, accuracy, and robustness were evaluated according to international guidelines. Owing to its simplicity, high sensitivity, and reliability, the proposed method can be an advantageous alternative to the traditional methodologies for the analysis of Hep in raw material and specially in finished products because of the low amounts of Hep sample required.     

Emission properties of femtosecond (fs) laser fabricated microstructures in Polystyrene (PS)

We fabricated microstructures and micro craters in thin films and bulk of PS. To the best of our knowledge, this is the first report of the emission from fs laser modified regions of PS when excited at 337, 400, 458, 488 and 514 nm wavelengths with different emission peaks. We systematically studied the emission in context of formation of optical centers and analyzed the spectra of irradiated PS. Change in the excitation wavelength leads to a shift in the emission peak, whereby, we infer that the emission should be due to a myriad of optical centers. Interestingly these optical centers have a similar excitation spectrum. Diphenylbutadiene (DPBD) is probably the main optical center among other optical centers thus formed in the process of fs laser irradiation of PS.     

Spectroscopic investigations of femtosecond laser irradiated polystyrene and fabrication of microstructures

We report microfabrication of structures in bulk and thin films of polystyrene (PS) using femtosecond (fs) laser pulses. For the first time to our knowledge, we report emission from the fs laser modified regions of bulk and thin films of PS when excited at 458, 488, and 514 nm. Moreover, we report the existence of peroxide type free radicals, for the first time, in fs laser irradiated bulk PS. We observed the suppression of Raman modes in case of structures fabricated at higher energies and the same effect was noticed in central portion of the structures fabricated. No appreciable broadening was observed in the case of structures fabricated at low energies. Possible applications resulting from such structures are discussed briefly.     

Polymers with spatial or topological constraints: Theoretical and computational results

In this review, we provide an organized summary of the theoretical and computational results that are available for polymers subject to spatial or topological constraints. Because of the interdisciplinary character of the topic, we provide an accessible, non-specialist introduction to the main topological concepts, polymer models, and theoretical/computational methods used to investigate dense and entangled polymer systems. The main body of our review deals with (i) the effect that spatial confinement has on the equilibrium topological entanglement of one or more polymer chains and (ii) the metric and entropic properties of polymer chains with fixed topological states. These problems have important technological applications and implications for life sciences. Both aspects, especially the latter, are amply covered. A number of selected open problems are finally highlighted.     

Dielectric study of polyaniline/poly (methylmethacrylate) composite films below the percolation threshold

We report results of dielectric relaxation studies of polyaniline/poly(methylmethacrylate) composites with polyaniline amount less than the percolation threshold in the frequency range of 0.1 Hz to 1 MHz and temperature range of 10 °C–170 °C. We find a significant dependence of the glass transition temperature Tg on the polyaniline amount in the composite. α and β relaxation processes relative to the PMMA matrix are also affected by the presence of polyaniline inclusion. We identify a relaxation process due to ionic conductivity and another process attributed to residual solvent. The characteristic relaxation frequency of each process and the activation energy depend on the polyaniline amount in the composite. The ac conductivity in the high frequency range is fitted to the universal power law of Jonscher characteristic of disordered materials.     

Perspectives in the Development of High-Temperature Polymers

Research on high-temperature organic polymers was initiated in the late 1950s primarily to meet the needs of the aerospace and electronics industry. Since then, many different heat-resistant polymer systems have been reported, of which several are now commercially available. These polymers are used in many diverse applications such as circuitry in microelectronic components, coatings on cookware, binders in brake systems, sealants for fuel tanks in high-speed aircraft, gears in copying machines, structural components in high-speed aircraft, and space vehicles, films and wire coatings for electrical insulation. Worldwide use for high-temperature polymers in 1988 was estimated at 90 million kilograms with a value of $ 2.3 billion. This market is expected to double by the end of this decade. The major polymer classes discussed in the present paper are polyimides and poly(aryl ethers).     

Enhanced Electrocatalytic Performance of Anthraquinonemonosulfonate‐Doped Polypyrrole Composite: Electroanalysis for the Specific Roles of Anthraquinone Derivative and Polypyrrole Layer on Oxygen Reduction Reaction

To analyze the specific roles of anthraquinone‐2‐sulfonate (AQS) and polypyrrole (PPy) layer on oxygen reduction reaction (ORR), the electrocatalytic reduction of oxygen was investigated on the AQS/PPy composite modified graphite electrode. Results show that the enhanced electrocatalytic performance is attributed to the excellent electrocatalytic activity of the immobilized AQS functional groups to mediate two‐electron reduction of O₂ to H₂O₂. The PPy layer may not participate in ORR, but it can further catalyze the two‐electron reduction of H₂O₂ to produce H₂O in the potential range more negative than that the two‐electron reduction of oxygen proceeds efficiently on the AQS sites.     

Energy Transfer and Trapping in Rigid Solutions of Aromatic Polymers

Energy transfer by excitons is now well established in films and solutions of aromatic polymers. Excitons in disordered systems can be considered as electronically excited states, which are transferred between the light absorbing groups in a random hopping process (the same is true in molecular crystals if, because of thermal vibrations, the coherence length of the exciton waves approaches the lattice constant and consequently the band model of the excitons breaks down).     

Swollen-collapsed transition in random hetero-polymers

A lattice model of a hetero-polymer with random hydrophilic-hydrophobic charges interacting with the solvent is introduced, whose continuum counterpart has been proposed by Garel, Leibler and Orland [#!GLO!#]. The transfer matrix technique is used to study various constrained annealed systems which approximate at various degrees of accuracy the original quenched model. For highly hydrophobic chains an ordinary -point transition is found from a high temperature swollen phase to a low temperature compact phase. Depending on the type of constrained averages, at very low temperatures a swollen phase or a coexistence between compact and swollen phases are found. The results are carefully compared with the corresponding ones obtained in the continuum limit, and various improvements in the original calculations are discussed. Received: 10 April 1998 / Revised: 4 June 1998 / Accepted: 1st July 1998