POROUS MEMBRANE TEMPLATED SYNTHESIS OF POLYMER PILLARED LAYER

The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.     

富羧酸基团的共轭微孔聚合物:结构单元对孔隙和气体吸附性能的影响

Polar groups in the skeletons of conjugated microporous polymers (CMPs) play an important role in determining their porosity and gas sorption performance. Understanding the effect of the polar group on the properties of CMPs is essential for further advances in this field. To address this fundamental issue, we used benzene, the simplest aromatic system, as a monomer for the construction of two novel CMPs with multi-carboxylic acid groups in their skeletons (CMP-COOH@1 and CMP-COOH@2). We then explored the profound effect the amount of free carboxylic acid in each polymer had on their porosity, isosteric heat, gas adsorption, and gas selectivity. CMP-COOH@1 and CMP-COOH@2 showed Brunauer-Emmett-Teller (BET) surface areas of 835 and 765 m²·g^-1, respectively, displaying high potential for carbon dioxide storage applications. CMP-COOH@1 and CMP-COOH@2 exhibited CO₂ capture capabilities of 2.17 and 2.63 mmol·g^-1 (at 273 K and 1.05 × 10⁵ Pa), respectively, which were higher than those of their counterpart polymers, CMP-1 and CMP-2, which showed CO₂ capture capabilities of 1.66 and 2.28 mmol·g^-1, respectively. Our results revealed that increasing the number of carboxylic acid groups in polymers could improve their adsorption capacity and selectivity.     

Development of a prototype high-current low-energy ion implanter

A high current-low energy implant system for the processing of semiconductor devices at medium-high dopant levels is described. Criteria for selection and design of ion beam components such as ion beam optics, vacuum requirements and reliability are discussed. Variations in wafer uniformities for within wafer, wafer-to-wafer and run-to-run are presented.     

Molecular signal suppression by in situ microextraction in nuclear magnetic resonance spectroscopy

The detailed characterization of complex mixtures by NMR is often hampered by the presence of signals from uninformative compounds, the resonances of which overlap with those of the molecules of interest. We provide here a proof of principle for an approach to NMR signal suppression in complex samples using Molecularly Imprinted Polymers (MIPS). Addition of a few milligrams of polymer to a solution traps the target molecule in typical micromolar to millimolar concentration, thus achieving in situ signal suppression, without altering any other spectral features. This method minimized any manipulation or perturbation of the spectrum and was applied to a complex mixture of known compounds and to a plant extract, in both cases spiked with a compound (bisphenol A), which was subsequently removed by selective binding to a complementary MIP. What is described in this report is comparable with microextraction and may in due course be applied to a large number of analytical challenges. Copyright © 2014 John Wiley & Sons, Ltd.     

Stark Hole-Burning Spectroscopy of Cresylviolet Perchlorate in Amorphous Hosts

Stark hole-burning spectroscopy is used to investigate the effective dipole moment change of cresylviolet perchlorate (CVP) in various glass and polymer hosts such as ethanol:methanol (EM), polyvinyl alcohol (PVA), poly (2-hydroxyethyl) methacrylate (PHEMA), polyvinylbutyral (PVB), and formamide. The strong correlation between effective dipole moment change of the guest molecule and the holeburning efficiencies of the host matrices illustrates the sensitivity of the dipole moment change as a direct measure of guest-host interactions. Hole-burning is found to be more efficient as the dipole induced reaction field increases. This relationship is discussed in terms of the unusual hole-burning mechanism suggested for this molecule. The effective dipole moment change of cresylviolet perchlorate ranges from 0.14 to 0.59 Debye.     

Improvement of hydrophilic properties of electrospun polyamide-imide fibrous mats by atmospheric-pressure plasma treatment

Polyamide-imide (PAI) fibrous mats were fabricated through electrospinning and further treated with atmospheric-pressure plasma. The surface characteristics of the PAI fibrous mats were examined to determine the effect of plasma treatment on the hydrophilic properties. FT-IR, X-ray photoelectron spectroscopy, and contact-angle analysis indicated that the hydrophilicity of the PAI fibrous mats increased upon the introduction of hydrophilic groups by plasma treatment. The concentration of functional groups, including oxygen, and the surface roughness of the PAI fibrous mats increased with increasing treatment time. The optimum plasma treatment time for surface modification of the PAI fibrous mats under atmospheric pressure was 120 s.     

Polypyrrole Grafts Synthesized via Electrochemical Polymerization

Abstract

Electrically conducting polypyrrole grafts with poly[(methyl meth-acrylate)-co-(2-(N-pyrrolyl) ethyl methacrylate)] (PMMA-co-PEMA) were synthesized by constant potential electrolysis. Cyclic Voltammetry, DSC, TGA, SEM and elemental analysis were used in order to characterize the free standing films. Conductivities of the polymers were measured by a four-probe technique.     

Polybenzimidazole-Ester-Imides

Thermostable heterocyclic polymers containing benzimidazole and imide rings, as well as flexible ester groups, have been synthesized by solution polycondensation of diaminobenzimidazoles with dianhydrides incorporating preformed ester linkages. The thermal stability and the electrical insulating properties of these products are discussed and compared with related heterocyclic polymers.     

Interaction Between DNA and Some Salicylic Acid Derivatives and Characterization of Their DNA Targets

A nanofiber polypyrrole (PPy) film was electrochemically deposited on a Pt electrode and used for immobilization of single‐stranded DNA (ssDNA) and investigation of hybridization events. Then, the interaction of DNA with four salicylic acid (SA) derivatives was studied with electrochemical methods. The oxidation peak of guanine was decreased by increasing the concentrations of salicylic acid derivatives. The binding constants of these compounds with four different sequences of DNA including different percentages of guanine‐cytosine and adenine‐thymine bases were calculated and it was clarified that sequences with higher percentage of adenine‐thymine bases have a higher binding constant in their interaction with SA derivatives.