Luminescent polymeric hybrids functionalized by β-diketone with silicon-oxygen networks and carbon chains: Assembly and characterization

2-Thenoyltrifluoroacetone (TTA) was grafted onto the coupling agent 3-(triethoxysilyl)-propyl-isocyanate to construct the precursor I (TTA-Si), and polymer precursors II (PVPD, PMAA and PVPDMAA) were synthesized through the addition polymerization reactions. Then precursors I and II have coordinated to the rare-earth ions with the carbonyl, carboxyl group or nitrogen atom, respectively, and after hydrolysis and copolycondensation sol-gel process, the three kinds of polymeric hybrids were obtained. FTIR, ultraviolet-visible diffuse reflection and fluorescence absorption spectra, electronic micrographs, room-temperature X-ray diffraction patterns and TG plots were characterized and the results reveal that the hybrid materials showed uniformity in the microstructure, efficient intramolecular energy transfer system and excellent characteristic emission of terbium ions under UV irradiation.     

Polymeric complex micelle loaded with axially substituted silicon（IV） phthalocyanine

A novel axially substituted silicon(IV) phthalocyanine, namely di-pyridyloxy axially substituted silicon(IV) phthalocyanine 2 was synthesized and characterized by UV/vis, IR, elemental analysis, MS as well as ¹H NMR spectroscopy. Hydrophobic 2 was encapsulated by amphiphilic triblock copolymer poly[N^ε-(benzyloxycarbonyl-lysine]-poly(ethylene glycol)-poly[N^ε-(benzyl oxycarbonyl) (PLL(Z)-b-PEG-b-PLL(Z)) to form hydrophobic 2-loaded polymeric complex micelle (PIC) (2-loaded PIC). Atom force microscopy (AFM) image showed that 2-loaded PIC formed a spherical nanocarrier with approximately 35-50 nm in diameter. The fluorescence intensity and lifetime of 2-loaded PIC was significantly enhanced by the incorporation 2 into PIC nanocarrier.     

ATRP synthesis and association properties of thermoresponsive anionic block copolymers

Thermosensitive anionic block copolymers of sodium 2‐acrylamido‐2‐methylpropanesulfonate (AMPS) and N‐isopropylacrylamide (NIPAAM) with different block lengths were prepared by atom transfer radical polymerization (ATRP). Controlled polymerization was achieved by using ethyl 2‐chloropropionate (ECP) as initiator and CuCl/CuCl₂/tris(2‐dimethylaminoethyl)amine (Me₆TREN) catalytic system in DMF:water 50:50 (v/v) mixtures at 20 °C. Blocks lengths ranging from 36 to 98 repeating units were obtained. The association properties in aqueous solutions at different NaCl ionic strengths were studied as a function of temperature and polymer concentration by dynamic light scattering, fluorescence spectroscopy, and energy‐filtered transmission electron microscopy. The block copolymers with a higher pNIPAAM/pAMPS ratio formed spherical core‐shell type micelles independently of the ionic strength. The block copolymers with lower pNIPAAM/pAMPS ratio formed core‐shell type micelles at high ionic strength. Larger particles were observed at low ionic strength, which could be due to the formation of vesicles or compound micelles/micellar clusters. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4830–4842, 2008     

Ultrasound-assisted production and optimization of mini-emulsions in a microfluidic chip in continuous-flow

The use of ultrasound to generate mini-emulsions (50 nm to 1 μm in diameter) and nanoemulsions (mean droplet diameter < 200 nm) is of great relevance in drug delivery, particle synthesis and cosmetic and food industries. Therefore, it is desirable to develop new strategies to obtain new formulations faster and with less reagent consumption. Here, we present a polydimethylsiloxane (PDMS)-based microfluidic device that generates oil-in-water or water-in-oil mini-emulsions in continuous flow employing ultrasound as the driving force. A Langevin piezoelectric attached to the same glass slide as the microdevice provides enough power to create mini-emulsions in a single cycle and without reagents pre-homogenization. By introducing independently four different fluids into the microfluidic platform, it is possible to gradually modify the composition of oil, water and two different surfactants, to determine the most favorable formulation for minimizing droplet diameter and polydispersity, employing less than 500 µL of reagents. It was found that cavitation bubbles are the most important mechanism underlying emulsions formation in the microchannels and that degassing of the aqueous phase before its introduction to the device can be an important factor for reduction of droplet polydispersity. This idea is demonstrated by synthetizing solid polymeric particles with a narrow size distribution starting from a mini-emulsion produced by the device.     

Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers

A micromechanically based constitutive model for the elasto-viscoplastic deformation and texture evolution of semi-crystalline polymers is developed. The model idealizes the microstructure to consist of an aggregate of two-phase layered composite inclusions. A new framework for the composite inclusion model is formulated to facilitate the use of finite deformation elasto-viscoplastic constitutive models for each constituent phase. The crystalline lamellae are modeled as anisotropic elastic with plastic flow occurring via crystallographic slip. The amorphous phase is modeled as isotropic elastic with plastic flow being a rate-dependent process with strain hardening resulting from molecular orientation. The volume-averaged deformation and stress within the inclusions are related to the macroscopic fields by a hybrid interaction model. The uniaxial compression of initially isotropic high density polyethylene (HDPE) is taken as a case study. The ability of the model to capture the elasto-plastic stress-strain behavior of HDPE during monotonic and cyclic loading, the evolution of anisotropy, and the effect of crystallinity on initial modulus, yield stress, post-yield behavior and unloading-reloading cycles are presented.     

Effects of Acid and Base on the Inductive Efficiency of Oligonucleotide on the Vesicle Formation from Single-Chained Cationic Surfactant

Recently, we reported for the first time that oligonucleotide could induce single‐chained cationic surfactant molecules to aggregate into vesicles and the facilitative efficiency of oligonucleotide on vesicle formation was dependent on its size and sequence. In the present paper, we will continue to study the effects of acid and base on the facilitative efficiency of oligonucleotide on vesicle formation. It is found that proton ions show little effect on the facilitative efficiency while hydroxide ions make it decreased. Moreover, the percentage of oligonucleotide involved in vesicle formation in basic solution is much lower than that in acidic solution (which is almost equal to that in water). Since the structures and properties of DNA/amphiphile complex are very important for its application as nonviral gene carrier, this study may provide some helpful information for gene therapy.     

检测维生素C的囊泡荧光传感器的制备

利用合成的含有识别基团苯硼酸和荧光读出基团萘的新型双亲化合物(DNMPBA)在THF/水选择性溶剂中自组织成囊泡,囊泡的相变温度为56.8℃;当向囊泡体系加维生素C时,DNMPBA囊泡中的萘生色基在345nm的荧光峰强度急剧减弱.荧光强度减弱归于所形成的硼酸酯增强了DNMPBA双亲化合物中一个氧原子孤对电子对萘生色基的淬灭作用.DNMPBA囊泡与维生素C的相互作用而导致体系荧光强度变化,使该体系有可能应用于检测生物物质如维生素C的化学传感器.     

新型含苯硼酸和喹啉的囊泡荧光多糖传感器的制备

利用合成的含有识别基团苯硼酸和荧光读出基团喹啉的新型双亲化合物对硼酸苯甲基-8-十六烷氧基溴化喹啉(BHQB)在水中自组织成囊泡,囊泡的相变温度为52.4℃;当向囊泡体系加糖时,BHQB囊泡中的喹啉生色基在508nm的荧光峰强度急剧减弱,425nm处荧光逐渐增强.荧光强度变化可能归于所形成的硼酸酯改变了双亲化合物中硼原子的杂化轨道形式,进一步引起了整个分子内部的电子云排布所致.BHQB囊泡与糖的相互作用而导致体系荧光强度变化,并且这种变化的幅度与加入糖的种类和量均有关.因此体系有可能应用于检测生物物质如糖的化学传感器.     

Self‐Assembly of Discrete Homochiral,Helical, Hydrogen‐Bonded Nanocages: From Vesicles to Microspheres and Tubules Capable of Gelating Solvents

The chiral tris‐monodentate imidazolinyl ligands 1 a – c exhibit a strong tendency to form the discrete, helical [2+3] nanocages 3 ([ 1 ₂ ?2 ₃]) with tartaric acids 2 . Circular dichroism (CD) spectra and theoretical calculations reveal that supramolecular handedness of capsulelike architectures is determined only by the chirality of the imidazolinyl ligands rather than tartaric acids. The chirality of imidazolinyl ligands is transferred to the helicity of the complexes through the directed hydrogen bonds between the N3 atom of imidazoline rings and the carboxyl of tartaric acids. These hydrogen‐bonded nanocages can spontaneously self‐assemble into spherical vesicles, during which the hydrogen bonding that arises from the hydroxyl groups of tartaric acids plays a crucial issue. The vesicles formed by [{(S,S,S)‐ 1 a }₂( 2 ^L)₃] ( 3 a ) may further evolve into microspheres that gelate organic solvents after being aged at ?20 °C for 24 h, and can also be unprecedentedly transformed to tubular assemblies capable of rigidifying the solvents when subjected to ultrasound irradiation.     

Polymer supported calixarene derivative useful for solid-phase synthesis application

A calix[4]arene derivative has been anchored to carboxyl CPG and TentaGel supports by an easily cleavable ester bond and DMT groups allow a simple loading evaluation via UV-vis spectroscopy. The loading of the calixarene on TentaGel resin has also been estimated by HR-MAS NMR experiments. The potential of the polymer supported calixarenes (9 and 10) in solid phase synthesis has been tested by condensation of four thymine nucleotide units onto the upper rim of the calix[4]arene skeleton.