Mass transfer determining parameter in facilitated transport through di-(2-ethylhexyl) dithiophosphoric acid activated composite membranes

Activated composite membranes (ACMs) containing di-(2-ethylhexyl) dithiophosphoric acid (D2EHDTPA) as a carrier have been found to facilitate the transport and separation of several cations. This paper describes an approach to the chemical characterisation of the transport phenomena of Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Sn²⁺ and In³⁺ by an ACM. The selectivity of D2EHDTPA based ACM towards different metal ions is presented and discussed focusing in Zn²⁺ and Cd²⁺ transport and recovery. Selectivity demonstrates that zinc ions are removable from mixtures due to the different extraction strength of D2EHDTPA. Such selectivity is based on the differences of the dynamic behaviour of the metal ions transport. In addition, a correlation of the chemical behaviour of those ACM systems with the corresponding solvent extraction systems has been found.     

Electrochemistry of capillary systems with narrow pores. I. Overview

In capillary systems with narrow pores the Helmholtz electrochemical double layer located at the pore wall extends over the entire cross section of the pores. It loses its character as the “charge on the wall”. It will be shown that not only the electrokinetic phenomena but also the electrical conductivity and the dialysis potential of membranes with narrow pores can be understood from the same point of view, namely: the electrolyte solution in the pores of a membrane with narrow pores is considered to be an approximately homogeneous solution in contact with immobilised charges located at the pore wall. In this case the electrochemical equations contain the fixed ion concentration as a parameter instead of the ζ potential. This makes it possible to describe quantitatively to a good approximation data on the electroosmosis, the electrical conductivity, the streaming potential and the dialysis potential taken from the literature, as well as results of our own measurements, by using a single membrane constant.     

Electrokinetic investigations of charged porous membranes

Asymmetric ultrafiltration membranes were prepared from fully aromatic polyamides differing in the diamine monomers of the polymeric backbone and from polysulfone. Nanofiltration membranes were made from polysulfone and polyethersulfone. The polysulfone as well as the polyethersulfone were chemically modified to change the surface charges of the membranes that were made from these polymers. This means neutral, positively as well as negatively charged membranes could be employed for the measurements. The surface properties of the membranes as a function of pH were determined by measuring the streaming potential in a perpendicular and horizontal mode. Applying proteins the values of the streaming potential changed depending on the original charges of the membranes as well as on the pH of the solution. The values shifted to either higher or lower absolute values. Thus, characterization of unused and used membranes can be carried out by electrokinetic measurements. This was also demonstrated using a membrane fitted out with invertase. The zeta potential of nanofiltration membranes, however, was only evaluated from the results obtained with the horizontally run cell.     

Synthesis of Nitroalkanes from Alkylhalides under Mild and Nonaqueous Conditions by Using Polymer Supported Nitrites

Alkyl halides are efficiently converted to their corresponding nitroalkanes under mild and nonaqueous conditions by using polymer supported nitrites. The polymeric reagent is regenerable.     

An NMR study of methanol diffusion in polymer electrolyte fuel cell membranes

Methanol diffusion in two polymer electrolyte membranes, Nafion 117 and BPSH 40 (a 40% disulfonated wholly aromatic polyarylene ether sulfone), was measured using a modified pulsed field gradient NMR method. This method allowed for the diffusion coefficient of methanol within the membrane to be determined while immersed in a methanol solution of known concentration. A second set of gradient pulses suppressed the signal from the solvent in solution, thus allowing the methanol within the membrane to be monitored unambiguously. Over a methanol concentration range of 0.5–8 M, methanol diffusion coefficients in Nafion 117 were found to increase from 2.9 × 10⁻⁶ to 4.0 × 10⁻⁶ cm² s⁻¹. For BPSH 40, the diffusion coefficient dropped significantly over the same concentration range, from 7.7 × 10⁻⁶ to 2.5 × 10⁻⁶cm² s⁻¹. The difference in diffusion behavior is largely related to the amount of solvent sorbed by the membranes. Increasing the methanol concentration results in an increase in solvent uptake for Nafion 117, while BPSH 40 actually excludes the solvent at higher concentrations. In contrast, diffusion of methanol measured via permeability measurements (assuming a partition coefficient of 1) was lower (1.3 × 10⁻⁶ and 6.4 × 10⁻⁷ cm² s⁻¹ for Nafion 117 and BPSH 40 respectively) and showed no concentration dependence. The differences observed between the two techniques are related to the length scale over which diffusion is monitored and the partition coefficient, or solubility, of methanol in the membranes as a function of concentration. For the permeability measurements, this length is equal to the thickness of the membrane (178 and 132 μm for Nafion 117 and BPSH 40 respectively) whereas the NMR method observes diffusion over a length of approximately 4–8 μm. Regardless of the measurement technique, BPSH 40 is a greater barrier to methanol permeability at high methanol concentrations.     

Discrimination and simultaneous determination of hydroquinone and catechol by tunable polymerization of imidazolium-based ionic liquid on multi-walled carbon nanotube surfaces

Tunable polymerization of ionic liquid on the surfaces of multi-walled carbon nanotubes (MWCNTs) was achieved by a mild thermal-initiation-free radical reaction of 3-ethy-1-vinylimidazolium tetrafluoroborate in the presence of MWCNTs. Successful modification of polymeric ionic liquid (PIL) on MWCNTs surfaces (PIL-MWCNTs) was demonstrated by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and X-ray photoelectron spectroscopy. The resulting PIL-MWCNTs possessed unique features of high dispersity in aqueous solution and tunable thickness of PIL layer, due to positive imidazole groups along PIL chains and controllable ionic liquid polymerization by tuning the ratio of precursor. Based on cation-π interaction between the positive imidazole groups on PIL-MWCNTs surface and hydroquinone (HQ) or catechol (CC), excellent discrimination ability toward HQ and CC and improved simultaneous detection performance were achieved. The linear range for HQ and CC were 1.0 × 10⁻⁶ to 5.0 × 10⁻⁴ M and 1.0 × 10⁻⁶ to 4.0 × 10⁻⁴ M, respectively. The detection limit for HQ was 4.0 × 10⁻⁷ M and for CC 1.7 × 10⁻⁷ M (S/N = 3), correspondingly.     

悬浮聚合制备大尺寸梭形聚苯乙烯粒子新方法及机理研究

利用氢氧化钾对苯乙烯-马来酸酐交替共聚物(SMA)进行水解,所得中等皂化程度的SMA水解产物(SMAA)在水溶液中具有刚性棒状直链构型;将此特殊结构的大分子作为分散剂用于苯乙烯悬浮聚合,通过控制搅拌速度和油水比,可得到梭形聚苯乙烯粒子;在优化条件下,粒子平均长度6.8 mm,宽度1.4 mm,厚度0.5 mm,长径比约5.0.其可能的机理为,中等皂化程度的刚棒直链型SMAA在聚合物"软粒子"表面能形成难以"回复"的有效保护层,使由剪切形成的变形聚合物"软粒子"在聚合过程中能保持形状和尺寸的稳定,从而得到梭形聚合物粒子.     

Synthesis, characterization and ion transport properties of hot-pressed solid polymer electrolytes (1−x) PEO:x KI

Synthesis and ion transport properties of hot-pressed solid polymer electrolytes (SPEs), (1-x) PEO: x KI, where x is the content of KI in wt%, are reported. A hot-press technique has been used for the formation of the polymeric membranes in place of the usual solution cast method. The composition (80PEO:20KI) was identified as the highest conducting polymer electrolyte on the basis of compositional dependent conductivity studies of PEO:KI films. A conductivity enhancement of more than two orders of magnitude from that of the pure PEO was achieved. Materials characterization and ion transport mechanism were explained by using various experimental techniques.     

Separation Membranes Constructed from Inorganic Nanofibers by Filtration Technique

Nanofibrous materials have been extensively investigated and used as building blocks for various nanodevices, due to their unique one‐dimensional structures. Recently, novel membranes constructed by using nanofibers have been reported by various techniques. Here, we will give a critical review of our recent research on the general solution processed unique sub‐3 nm thin metal hydroxide nanofibers and their application for constructing ultrathin separation membranes via filtration technique. The superior separation performances of these membranes hold the promising future for pressure‐driven membrane separation processes.     

Phosphoric acid‐doped imidazolium ionomers with enhanced stability for anhydrous proton‐exchange membrane applications

Phosphoric acid‐doped crosslinked proton‐conducting membranes with high anhydrous proton conductivity, and good chemical stability in phosphoric acid were synthesized and characterized. The synthetic procedure of the acid‐doped composite membranes mainly involves the in situ crosslinking of polymerizable monomer oils (styrene and acrylonitrile) and vinylimidazole, and followed by the sulfonation of pendant imidazole groups with butanesultone, and further doped with phosphoric acid. The resultant phosphoric acid‐doped composite electrolyte membranes are flexible and show high thermal stability and high‐proton conductivity up to the order of 10^?2 S cm^?1 at 160 °C under anhydrous conditions. The phosphoric acid uptake, swelling degree, and proton conductivity of the composite membranes increase with the vinylimidazole content. The resultant composite membranes also show good oxidative stability in Fenton's reagent (at 70 °C), and quite good chemical stability in phosphoric acid (at 160 °C). The properties of the prepared electrolyte membranes indicate their promising prospects in anhydrous proton‐exchange membrane applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013 , 51, 1311–1317