Design and fabrication of fluid controlled dynamic optical lens system

A novel small fluid controlled optical lens system that is capable of displaying dynamic variation of its focal length and field-of-view (FOV) is designed and fabricated. In this active lens system, appropriate volume of the optical fluid can be pumped into or out of the lens chamber to provide double-convex (DCX) or double-concave (DCV) lens effect. Simple optical imaging experiments were performed using different sets of glass lenses with fixed focal lengths to determine the optimum lens configuration required for designing a dynamic optical lens system. The experimental results obtained from the glass lenses demonstrate that a combination of a single DCX lens with three DCV lenses provides a wider FOV. The flexible membranes for fluid controlled lenses were fabricated using polydimethylsiloxane polymer material, which has good optical transparency and elasticity. A simple fluid injection system is used to vary the radius of curvature of the lenses, and thereby to change the focal length. A dynamic optical lens system with a combination of one DCX and multiple variable focal length DCV lenses as designed here can image an object with a wide range of focal length and FOV. With this fluid controlled optical system, the FOV and focal length could be continuously varied and a maximum FOV of 118.3° could be achieved. The smallest f-number (f_/#) for this fluid controlled single lens system was found to be 1.3, which corresponds to the numerical aperture value of 0.35.     

Progress in the quality assurance of environmental trace organic analysis

An overview is given on the stepwise learning programmes undertaken to identify the main sources of error associated with the determination of the mandatory organic contaminants in the marine monitoring programmes. Details are given on the preparation and use of LRMs and CRMs to maintain analytical control and quantify the laboratory errors in relation to the measurement of changes in the environment.     

FexNi100−x nanometric films deposited by laser ablation on SiO2/Si substrates

Fe_xNi_100−x nanometric films were deposited on SiO₂/Si substrates at room temperature using the pulsed laser deposition technique. The targets were Fe-Ni amorphous magnetic foils with composition Fe₅₀Ni₅₀, Fe₃₅Ni₆₅ and Fe₂₂Ni₇₈. Morphological and structural properties of the deposited films were investigated using scanning electron microscopy, Rutherford backscattering spectrometry, grazing incidence X-ray diffraction, and X-ray reflectivity. Electrical and magnetic characteristics of the films were investigated by using the four-point probe and the magneto-optic Kerr effect techniques, respectively. The film properties are strictly dependent on the Fe-Ni compositional ratio.     

一种高性能数字显微图像分析系统

给出了基于Windows操作系统的24位真彩色通用的高性能显微图像检测与分析软件系统，它采用先进的图像处理和形态分析算法，能对各种显微图像进行处理、分析和检测；并具有友好的操作界面、性能稳定等特点，可为材料、冶金、医药、生物、化工等相关领域的用户提供便捷的显微图像分析及处理测量工具。     

三片式液晶投影仪的立体视觉研究

基于对三原色信号进行偏振特性的分析,提出了一种在三片式液晶投影显示设备上实现立体显示的新方法。该方法利用红色和蓝色信号光与绿色信号光在偏振方向上正交的特性,在信号通道之间引入视差,实现了三维立体显示。因此这种方法被称为补色偏振体视。介绍了该方法的基本原理,并详细叙述了用PHOTOSHOP软件制作补色偏振立体图对的方法。     

A theory of coupled diffusion and large deformation in polymeric gels

A large quantity of small molecules may migrate into a network of long polymers, causing the network to swell, forming an aggregate known as a polymeric gel. This paper formulates a theory of the coupled mass transport and large deformation. The free energy of the gel results from two molecular processes: stretching the network and mixing the network with the small molecules. Both the small molecules and the long polymers are taken to be incompressible, a constraint that we enforce by using a Lagrange multiplier, which coincides with the osmosis pressure or the swelling stress. The gel can undergo large deformation of two modes. The first mode results from the fast process of local rearrangement of molecules, allowing the gel to change shape but not volume. The second mode results from the slow process of long-range migration of the small molecules, allowing the gel to change both shape and volume. We assume that the local rearrangement is instantaneous, and model the long-range migration by assuming that the small molecules diffuse inside the gel. The theory is illustrated with a layer of a gel constrained in its plane and subject to a weight in the normal direction. We also predict the scaling behavior of a gel under a conical indenter.     

Indentation responses of piezoelectric films

Frictionless indentation responses of transversely isotropic piezoelectric film/rigid substrate systems under circular cylindrical indenter (i.e., punch), conical indenter (i.e., cone), and spherical indenter (i.e., sphere) are investigated. Both insulating and conducting indenters are considered. The technique of Hankel transformation is employed to derive the corresponding dual integral equations for the mixed boundary value indentation problems. For the two limiting cases of infinitely thick and infinitely thin piezoelectric films, closed-form solutions are obtained. For piezoelectric films of finite thickness, a numerical method is constructed to solve the dual integral equations and semi-empirical models having only two unknown parameters are proposed for the responses of indentation force, electric charge and electric potential, and contact radius. With the two parameters inferred from the numerical results, the semi-empirical formulae are found to provide good estimates of the indentation responses for the two limiting cases of infinitely thick and thin piezoelectric films, as well as those in between. The inferred parameters in the proposed semi-empirical formulae for normalized indentation force and electric charge are checked against four different piezoelectric materials and are found to be insensitive to the selection of piezoelectric materials. It is believed that the proposed semi-empirical indentation formulae are useful in developing experimental indentation techniques to extract the material properties of piezoelectric films.     

Axisymmetric frictionless contact of functionally graded materials

The main interest of this study is a new method to solve the axisymmetric frictionless contact problem of functionally graded materials (FGMs). Based on the fact that an arbitrary curve can be approached by a series of continuous but piecewise linear curves, the FGM is divided into a series of sub-layers with shear modulus varying linearly in each sub-layer and continuous at the sub-interfaces. With this model, the axisymmetric frictionless contact problem of a functionally graded coated half-space is investigated. By using the transfer matrix method and Hankel integral transform technique, the problem is reduced to a Cauchy singular integral equation. The contact pressure, contact region and indentation are calculated for various indenters by solving the equations numerically. An erratum to this article can be found at     

Modification of multiwalled carbon nanotubes by carboxy groups and determination of the degree of functionalization

Multiwalled carbon nanotubes were modified by carboxy groups. Four independent methods for the determination of the degree of functionalization of the surface were proposed: ¹³C NMR spectroscopy, thermogravimetry, titrimetry, and fluorimetry. The first two methods show the total content of carboxy groups in the sample, and the latter two methods give information about the content of the surface groups only. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 291–295, February, 2008.