负载茜素红S的纳米磁性碳粉修饰电极测定牛白蛋白

采用化学沉积法在纳米碳粉上合成磁性Fe3O4颗粒,纳米碳粉吸附茜素红S后通过磁力附着在石墨电极上,制成了负载茜素红S的纳米磁性碳粉修饰电极。研究了该电极在0.014 mol/L H2SO4-0.2 mol/L KC l溶液中对ARS-牛白蛋白的电还原作用,考察了多种实验条件对峰电流的影响。在-0.45 V电位下,牛白蛋白浓度在1.5×10-8~9×10-7mol/L范围内与线性扫描伏安法还原电流成反比,从而实现对牛白蛋白的测定,并初步研究了电化学反应机理。此方法制成的磁性纳米颗粒修饰电极集分离、富集、测定和更新于一体,具有更新方便的特点。     

手性镧系位移试剂核磁共振法测定芳氧丙酸酯类除草剂对映体纯度

以Eu(hfc)3和Pr(hfc)3为手性镧系位移试剂(CLSR),比较了两种CLSR对2,4-滴丙酸甲酯的1HNMR和13C NMR谱手性分离效果,结果表明:Pr(hfc)3比Eu(hfc)3对手性中心相连的甲基具有更好的手性分离效果。首次应用Pr(hfc)3测定了盖草能、稳杀得和喹禾灵3种手性芳氧丙酸酯类除草剂的1HNMR和13CNMR谱,其1HNMR谱分离度R约为1,盖草能和喹禾灵的13C NMR谱分离度R大于1.5,说明1H NMR和13CNMR谱手性分离效果适用于对映体纯度测定。与手性色谱法相比,CLSR-NMR法测定对映体纯度具有操作简便、分析速度快的显著优势。     

高分子相分离的分子动力学模拟

用粗粒化分子动力学(MD)模拟方法从分子层次研究两组分聚合物共混体系相分离过程中的动力学. 在相分离初期, 相区尺寸不随时间增加而变化; 在相分离中期, 相区尺寸与时间有很好的标度关系, 标度指数(α=1/3)符合Lifshiz-Slyozov提出的以扩散为主导的蒸发-凝聚机理的标度预测; 在相分离后期, 体系实现宏观相分离, 相区尺寸不再随时间改变而变化. 体积分数小的高分子链尺寸在相分离过程中先收缩再扩张, 在实现宏观相分离后, 高分子链尺寸又回到本体状态尺寸.     

原位聚合制备的离子液体/聚合物电解质的研究

采用原位聚合制备出新型的BMIPF6/PMMA聚合物电解质透明弹性膜. 研究结果表明, BMIPF6/PMMA聚合物电解质体系在305 ℃时仍具有较好的热稳定性, 其安全性能优于含有机溶剂的传统非水电解质体系. 随着离子液体含量的增加, 其玻璃化转变温度逐渐减小, 离子电导率升高; 且离子电导率与温度的关系服从VTF方程. 其中, 当BMIPF6的质量分数为50%时, 该聚合物电解质的室温离子电导率高达0.15 mS/cm.     

三功能合一的含铽高聚物的光谱性质研究

制备了一种新型的可平衡电荷(空穴与电子)传输的含铽高聚物。用红外光谱、飞行时间二次离子质谱、紫外光谱研究了其光谱性质,确认这种高聚物含有咔唑、铽络合物、噁二唑单元。用荧光光谱研究了不同状态下高聚物的荧光性质,来自共轭基团的荧光出现“荧光猝灭”。在紫外光照射下,高聚物可发出具有铽离子特征发射的纯绿光。     

How the Aggregates Determine Bound Rubber Models in Silicone Rubber? A Contrast Matching Neutron Scattering Study

The correlation between aggregates and bound rubber structures in silicone rubbers(S(phr)) with various silica fractions(ΦSi) has been investigated by contrast matching small-angle neutron scattering(SANS), swelling kinetics, and low-field nuclear magnetic resonance(NMR).Mixed solvents with deuterated cyclohexane fractions of 4.9% and 53.7% were chosen to match the scattering length densities of the matrix(SMP(phr)) and the filler(SMS(phr)), respectively. All the data consistently suggest that:(i) There is a critical threshold ΦSic between 10 and 30 phr;below ΦSic, the isolated aggregates are dominant, while beyond ΦSic, some rubber fraction is trapped among the agglomerate;(ii) ΦSiindependent thicknesses around 7.5 nm(NMR) and 8.6 nm(SANS) suggest that the bound rubber formation is determined by inherent properties of the components, and the power-law around 4.2 suggests an exponential changed gradient density of the bound rubber;(iii) SMS(80) presents a bicontinuous bound rubber with three characteristic lengths of 41, 100, and 234 nm. The expanded correlation length, a 20 nm smaller aggregate sizes suggest that such existent bicontinuous network in dry samples with less ΦSi is kind of impacted by swelling. With the obtained bound rubber models, the reinforcing mechanism of filled silicone rubber is elucidated.     

Dioxygen Reactivity of Copper(I)/Manganese(II)-Porphyrin Assemblies: Mechanistic Studies and Cooperative Activation of O2

The oxidation of transition metals such as manganese and copper by dioxygen (O₂) is of great interest to chemists and biochemists for fundamental and practical reasons. In this report, the O₂ reactivities of 1:1 and 1:2 mixtures of [(TPP)Mn^II] (1; TPP: Tetraphenylporphyrin) and [(tmpa)Cu^I(MeCN)]⁺ (2; TMPA: Tris(2-pyridylmethyl)amine) in 2-methyltetrahydrofuran (MeTHF) are described. Variable-temperature (−110 °C to room temperature) absorption spectroscopic measurements support that, at low temperature, oxygenation of the (TPP)Mn/Cu mixtures leads to rapid formation of a cupric superoxo intermediate, [(tmpa)Cu^II(O₂^•–)]⁺ (3), independent of the presence of the manganese porphyrin complex (1). Complex 3 subsequently reacts with 1 to form a heterobinuclear μ-peroxo species, [(tmpa)Cu^II–(O₂^2–)–Mn^III(TPP)]⁺ (4; λ_max = 443 nm), which thermally converts to a μ-oxo complex, [(tmpa)Cu^II–O–Mn^III(TPP)]⁺ (5; λ_max = 434 and 466 nm), confirmed by electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy. In the 1:2 (TPP)Mn/Cu mixture, 4 is subsequently attacked by a second equivalent of 3, giving a bis-μ-peroxo species, i.e., [(tmpa)Cu^II−(O₂²⁻)−Mn^IV(TPP)−(O₂²⁻)−Cu^II(tmpa)]²⁺ (7; λ_max = 420 nm and δ_pyrrolic = −44.90 ppm). The final decomposition product of the (TPP)Mn/Cu/O₂ chemistry in MeTHF is [(TPP)Mn^III(MeTHF)₂]⁺ (6), whose X-ray structure is also presented and compared to literature analogs.     

3D-ASL灌注成像与静息态功能MRI在癫痫诊断及鉴别中的价值

选取123例癫痫患者作为研究组,同期69例健康体检者作为对照组,均行三维动脉自旋标记技术(3D-ASL)灌注成像与静息态功能MRI(rs-FMRI)检查,研究二者在癫痫病诊断及鉴别中的价值.结果发现,研究组全面发作脑血流量(CBF)、低频振幅(ALFF)＜部分发作和对照组,全面发作血清脑源性神经细胞营养因子(BDNF)...     

基于级联卷积神经网络的前列腺磁共振图像分类

针对深度学习训练成本高,以及基于磁共振图像的前列腺癌临床诊断需要大量医学常识且极为耗时的问题,本文提出了一种基于级联卷积神经网络（Convolutional Neural Network,CNN）和磁共振图像的前列腺癌（Prostate Cancer,PCa）自动分类诊断方法,该网络以Faster-RCNN作为前网络,对前列腺区域进行提取分割,用于排除前列腺附近组织器官的干扰;以基于ResNet改进的网络结构CNN40_bottleneck作为后网络,用于对前列腺区域病变进行分类.后网络由瓶颈结构串联组成,其中使用批量标准化（Batch Normalization,BN）、全局平均池化（Global Average Pooling,GAP）进行优化.实验结果证明,本文方法对前列腺癌诊断结果较好,而且缩减了训练时间和参数量,有效降低了训练成本.     

1.3 GHz超导腔磁通排出效应研究

设计并搭建了一套高精度的磁场测量和补偿系统,并结合中国科学院高能物理研究所(IHEP)的2K超导腔垂直测试平台对1.3 GHz单加速间隙超导腔的磁通排出效应开展了实验研究:利用研制的磁场测量和补偿系统能够精密地测量超导腔赤道位置磁场,并能够将磁场补偿至小于5.0×10-8 T;并对超导腔不同表面温度梯度下的磁通排出效应进行了测量分析;对钉扎了磁场的超导腔进行了射频性能测试,研究了超导腔电阻对磁通钉扎的敏感度,以及在不同电场梯度下超导腔的表面电阻变化情况。结果表明,研制的高精度磁场测量和补偿系统能够满足超导腔磁通排出研究的需求;高的超导腔表面温度梯度有利于磁通的排出;磁通钉扎电阻的敏感度随着加速电场梯度的增加而增大,导致超导腔的性能下降。此实验研究也为后续超导腔的研制奠定了一定基础。