Preparation and electrical characterization of (PVC + KBrO3) polymer electrolytes for solid state battery applications

This paper presents results of studies on dc electrical conductivity and transference number measurements on potassium bromate (KBrO₃) complexed polyvinyl chloride (PVC) films prepared by solution cast technique. Temperature dependence of dc electrical conductivity and transference number data indicated the dominance of ion type charge transport in these specimens. The magnitude of conductivity increased with increase in concentration of the salt and temperature. Using this (PVC + KBrO₃) electrolyte, solid-state electrochemical cells were fabricated, and their discharge profiles were studied under a constant load of 100 kΩ. Several cell profiles such as open circuit voltage, short circuit current, power density, and energy density associated with these cells were evaluated and were reported. The features of complexation of the electrolytes were studied by X-ray diffraction and Fourier transform infrared spectroscopy. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

SSIMS analysis of organics, polymer blends and interfaces

This paper gives a critical review on the applications of ToF SIMS in the areas of polymer additive characterization and in the study of polymer blends and interfaces. Polymer additives can readily be identified by ToF SIMS using their parent molecular ions or characteristic fragments. This analytical capability has been successfully applied to monitor the migration or segregation of additives during polymer processing. ToF SIMS is an ideal analytical tool for the study of polymer blends and interfaces because it is able to provide information on both surface composition and morphology. In combination with other analytical techniques such as AFM and XPS, ToF SIMS chemical imaging capability has opened up new horizons in the investigation of complex polymer blend systems. Finally the main advantages and limitations of ToF SIMS in these application areas are also discussed.     

Rugged distal tips for CO2 laser medicine

Low-loss and rugged distal tips for CO₂ laser have been proposed and fabricated based on a commercially available stainless steel (St) pipe. A method of smoothening the inner surface of the St pipe with a rough inner surface is put forward. Fabrication parameters, transmission properties, and mechanical strength of the cyclic olefin polymer-coated silver hollow St distal tip are experimentally discussed.     

ToF-SIMS analysis of a fluorocarbon-grafted PET with a gold cluster ion source

Cluster ions have been recognized as a superb primary species in time of flight secondary ion mass spectroscopy (ToF-SIMS) compared with monatomic primary ions, as they significantly enhance the secondary ion yields from bulk samples. Self-assembled monolayers provide an important system for studying the fundamental mechanism involved in the yield enhancement.We used a gold cluster ion source to analyze a new type of self-assembled monolayer: a fluorocarbon-grafted polyethylene terephthalate. In addition to the structure details, which helped to understand the grafting mechanism, ToF-SIMS analysis revealed that fluorocarbon secondary ion yield enhancements by cluster ions were due to the enhanced sputter efficiency. A larger information depth may also be expected from the enhancement. Both mathematical definitions of damage cross-section and disappearance cross-section were revisited under a new context. Another cross-section parameter, sputter cross-section, was introduced to differentiate the beam induced sputter process from damage process.     

Ab initio modelling of crosslinking in polymers. A case of chains with furan rings

A quantum chemical model (Abinitio HF-MO and DFT-B3LYP) of polyfurfuryl alcohol crosslinking is shown. Two pathways were considered: (a) a Diels–Alder (D–A) reaction between a dihydrofuran moiety and a furan ring; (b) the addition reaction of electrophilic specimens on conjugated double bonds. The ability for the formation of D–A adducts (dienes and dienophiles) was investigated by the frontier molecular orbital (FMO) theory. Energy gaps between the FMO's of diene and dienophile structures suggest that the occurrence of the D–A reaction is possible. The results suggest that the carbons of the exo double bonds attached to dihydrofuran rings are the sites most likely to be attacked by electrophilic species, while the C₃ and C₄ atoms display the opposite tendency due to their low HOMO electron densities. Results of a thermochemical approach to these reactions at the MP2 level was in agreement with reactivity modelled by MO predictions.     

Controlled structure and density of “living” polystyrene brushes on flat silica surfaces

Thin layers of polystyrene were grown from surface-grafted nitroxide initiators via controlled “living” free radical polymerization. The “reactive” Langmuir-Blodgett deposition method allowed an effective control of the initiator layer density leading to PS brushes with different and high grafting density and stretching. The influence of the grafting density on the layer structure was studied. Comparison with theoretical predictions for monodispersed brushes in bad solvent was discussed. The thickness was found to vary linearly with molecular weight and the density dependence was shown using wetting measurements. Special features of controlled radical nitroxide polymerization from a surface were discussed. A direct comparison of the molecular weight and polydispersity between surface and bulk polymers was made by de-grafting the brushes into a toluene/HF solution. Finally, some evidence of a “surface Fischer” effect was shown from re-initiated layers. Received 20 December 2001     

The effect of microscopic features upon the transmissivity of enclosed laser ablated laminated metallised polymer films

A vacuum-deposited aluminium layer (20 nm) is sandwiched between two layers of laminated oriented polypropylene (OPP) film whose thickness varies from 20 to 40 μm. Selected areas of this sealed system were transparentised by the redistribution of the aluminium layer without breaking the seal or causing damage to the OPP film using a 75 W Q-switched Nd:YAG laser. The resultant transparentised films contain aluminium particles, distorted polymer areas and intact areas of the vacuum-coated aluminium layer. This paper investigates the effect of microscopic features upon the overall transmissivity of the laser-treated films and hence the quality of the transparentisation process.     

Quantitative and high mass ToF-SIMS studies of siloxane segregation in hydrogel polymers using cryogenic sample handling techniques

This paper examines the capabilities of cryogenic sample handling to examine composition and structure of hydrogel materials where siloxane components are central to the analysis. XPS analysis of multicomponent polymers with cryogenic sample handling following exposure to aqueous environments has revealed the composition and kinetics of near surface reorganization for siloxane and fluorocarbon containing polymers. In this study we report results from a ToF-SIMS protocol for cryogenic sample handling applied to the analysis of surface changes upon hydration/dehydration of hydrogel polymers. Comparison of results from angle dependent XPS and ToF-SIMS are discussed for a range of commercial soft contact lens materials. Both methods detected changes in surface chemistry between the hydrated (frozen) and dehydrated surfaces. Analysis of the hydrated surfaces detected polymer components indicative of the commercial formulation as well as ice clusters. Analysis of the dehydrated materials detected changes in surface chemistry relative to the hydrated surface in addition to loss of water due to sample dehydration. A quantitative standard additions method for ToF-SIMS data was used to determine submonolayer amounts of PDMS impurities at the surface of the hydrogels. ToF-SIMS analysis of a series of seven poly (allyl methacrylate-g-dimethylsiloxane), AMA-g-DMS, graft copolymers in the hydrated state revealed high mass oligomeric ion distributions for systems with bulk PDMS content greater than 25 wt.%. This marks the first time that detection of high mass oligomeric ion distributions from hydrated (frozen) surfaces has been reported. Analysis of the dehydrated surface detected formation of high mass oligomeric ion distributions for systems with PDMS bulk content greater than 15 wt.%, but only detected these ion distributions in wet (frozen) samples when the bulk concentration was greater than 25 wt.%.     

STUDY ON THE CONFORMATIONAL PROPERTIES OF RIGID POLYELECTROLYTE SPU IN SOLUTION

The conformation and dimension of SPU polyanion have been studied by viscosity and quasi-elastic light scattering methods. The rigidity of SPU is somewhat similar to CMC and its hydrodynamic radius decreases only slowly with increasing concentration of NaCl.     

Optimized analysis of the critical behavior in polymer mixtures from Monte Carlo simulations

A complete outline is given for how to determine the critical properties of polymer mixtures with extrapolation methods similar to the Ferrenberg-Swendsen techniques recently devised for spin systems. By measuring not only averages but the whole distribution of the quantities of interest, it is possible to extrapolate the data obtained in only a few simulations nearT _c over the entire critical region, thereby saving at least 90% of the computer time normally needed to locate susceptibility peaks or cumulant intersections and still getting more precise results. A complete picture of the critical properties of polymer mixtures in the thermodynamic limit is then obtained with finite-size scaling functions. Since the amount of information extracted from a simulation in this way is drastically increased as compared to conventional methods, the investigation of mixtures with long chains or built-in asymmetries is now possible. As an example, the critical points, exponents, and amplitudes of dense, symmetric polymer mixtures with chain lengths ranging fromN=16 up toN=256 are determined within the framework of the 3D bond fluctuation model using grand canonical simulation techniques. As an example for an asymmetry, the generalization of the method to asymmetric monomer potentials is briefly discussed.