On-line analysis of polymer melt processes

Molten polymer process streams are difficult to analyze either in- or on-line because of sampling problems due to the high temperature and viscosity of the molten state. Real-time monitoring of chemical compositions in these processes can significantly improve safety and product quality and minimize process costs and waste. The information content of the mid-infrared spectrum combined with the recent development of rugged process Fourier transform (FT) IR spectrometers is stimulating the application of process FT-IR to industrial polymer melt processes. Sampling considerations for polymer melts are reviewed. Also, the use of FT-IR spectrometry for on-line measurements of the polymer composition for polymer blends and copolymers in the melt, and the question of how this information could be used to monitor and control the quality of the product given by the process are discussed.     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

The use of ATR-IR to identify the components separated by paper chromatography

Summary A modified procedure for the identification of separated components in paper chromatography using attenuated total reflection infrared spectroscopy is described. This combined method, though inferior in sensitivity and resolution to the modern separation systems interfaced with sophisticated analytical instruments, is simple, relatively less expensive and suitable for routine analysis of components like polymer additives.     

Zr（Ⅳ）／PVA功能膜的膜催化酯化反应研究

在催化与渗透汽化分离技术相偶合的渗透汽化型膜反应器中，研究了羧酸酯的液相合成反应．实验中制备了两类具有强酸催化活性的ｚｒ（Ⅳ）／ＰＶＡ（聚乙烯醇）功能膜，采用管式膜方式，以乙酸正丁酯的合成反应为探针，对这类新型的催化反应技术在催化活性、分离性能以及分离对反应转化的影响等方面进行了探索性研究。从得到的结果看，膜催化酯化反应过程的反应条件和缓，转化率可达到９８％，反应的选择性为１００％．     

Plastic deformation and performance of engineering polymer materials

The plastic deformation mechanism operating in polymer glasses is analyzed. The whole process consists of two main stages: nucleation of special shear defects, called PSTs (plastic shear transformations), and their disappearance. The important feature of plastic deformation of glasses is the storage of a large amount of internal energy ΔU_def upon straining. Such energy storage is the critical issue for mechanical performance of polymeric material: if the amount of stored energy is high, the appearance of macroscopic failure is very probable while glassy materials collecting a small amount of stored deformation energy are quite ductile. It is proposed that the rate of disappearance of PSTs is a key factor in dissipation of stored deformation energy. A parameter describing the dissipation ability of material upon deformation is introduced.     

Characterization of n-butyl acrylate centered triads in poly(n-butyl acrylate-co-carbon monoxide-co-ethylene) by isotopic labeling and two dimensional NMR

Poly(n-butylacrylate-co-carbon monoxide-co-ethylene) (polyEBC) samples prepared from 13C-labeled monomer, n-butyl acrylate, were characterized using two dimensional (2D) pulsed field gradient (PFG) 750 MHz NMR spectroscopy. To elucidate the complex structure of the terpolymer, 2D-1H/13C-heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) experiments were conducted by selectively exciting the enhanced resonances in the spectra of two polymer samples, one polymer resulting from synthesis with 1-13C-n-butylacrylate monomer and a second polymer obtained from a synthesis with 2-13C-n-butylacrylate monomer. High-resolution 2D-NMR combined with 13C-labeling of the polymer greatly simplifies the 2D-NMR spectra, selectively enhances the weak peaks from low occurrence B-centered triad structures, and aids in their resonance assignments. In all experiments, the sample temperature was 120 degrees C, to ensure a homogeneous solution and sufficient molecular mobility. Electronic Supplementary Material: Supplementary material (1D 13C NMR spectra of the 13C-labeled and unlabeled polymers) is available in the online version of this article at http://dx.doi.org/100.1007/s00216-003-2402-3.     

高分子玻璃化转变过程的分子动力学模拟本科教学实验

玻璃化转变是高分子专业教学中的重要内容,转变过程中自由体积的变化和分子链段的运动是理解玻璃化转变的难点。在计算机上使用分子模拟的方法得到三维的可视化图形,可以更直观地观察到自由体积和分子链的变化。提炼近年分子模拟技术在玻璃化转变研究中的最新科研成果,得到既有理论基础又适合本科教学的课程素材。分子模拟可以实现了仪器测试无法达到的超快速升降温,并与仪器测试得到的实验结果相对照,验证了普通实验很难验证的理论观点,从而拓展了本科实验的范围,达到了很好的教学效果。     

Initiation of polymer degradation via transfer of infectious species

A novel dual stage chemiluminescence detection system incorporating individually controlled hot stages has been developed and applied to probe for material interaction effects during polymer degradation. Utilization of this system has resulted in experimental confirmation for the first time that in an oxidizing environment a degrading polymer A (in this case polypropylene, PP) is capable of infecting a different polymer B (in this case polybutadiene, HTPB) over a relatively large distance. In the presence of the infectious degrading polymer A, the thermal degradation of polymer B is observed over a significantly shorter time period. Consistent with infectious volatiles from material A initiating the degradation process in material B it was demonstrated that traces (micrograms) of a thermally sensitive peroxide in the vicinity of PP could induce degradation remotely. This observation documents cross-infectious phenomena between different polymers and has major consequences for polymer interactions, understanding fundamental degradation processes and long-term aging effects under combined material exposures.     

共混合聚(醚-酯)多嵌段共聚物的表面表征及其血液相容性研究

本文通过X-射线光电子能谱(XPS)、表面接触角、表面ξ电位和血液相容性实验,研究了聚(醚-酯)多嵌段共聚物及其共混物的表面组成和性质与血液相容性的关系。实验结果表明,疏水性的PET-PTMO多嵌段共聚物的血液相容性很差,并且与表相中软段的富集量无关;当亲水性的PET-PEO多嵌段共聚物与疏水性的PET-PTMO多嵌段共聚物共混后,发现存在着一个最佳的共混比例,此时材料表面的血小板粘附量大大降低。对于共混物,表相△[C—O)/[C—O]和表面ξ电位可以较好地与血小板粘附量相关联。以上结果清楚地表明,材料表面的亲-疏水性平衡、软段深度层次分布及表面电位是影响血液相容性的重要因素。     

有机聚合物整体柱及其在生物大分子色谱分离中的应用

整体柱是近年发展起来的一种新型的色谱分离分析技术，与传统的色谱柱相比，具有制作简单、背压低、分辨率高、柱容量大等优点。本文介绍了有机聚合物整体柱及其在生物大分子色谱分离领域的应用，分析了其存在的问题，并展望了其应用前景。