New Phase in the Bi–Sr–Ca–Cu–O System

Cooling a melt of a Bi–Sr–Ca–Cu–O system (Bi:Sr:Ca:Cu = 4:3:3:4 or 2:2:2:4) from 1000°C-1050°C yielded crystals of a new red-colored nonsuperconducting phase, accompanying the superconducting 2212 and 2201 phases. Based on the EPR spectra, it was concluded that copper is univalent in this compound. The new phase has a composition Bi_2.2Sr_1.6Ca_1.3Cu₂Ox. The X-ray diffraction pattern has been indexed, and the unit cell parameters of the phase have been determined: space group P2/m, a = 12.93, b = 4.55, c = 10.94 ; = 102.72°.     

基于课程标准的教学——以常见阴、阳离子的检验为例

以常见的阴、阳离子的检验为例，研究了如何实施基于标准的教学。校本教材的开发为标准、教材、教学、评价的一致性提供保障；以学生应知的和能做的驱动课堂活动；根据达成标准应有怎样的质量表现，试卷编制先于教学设计。课堂上，“教”“学”双方都明确学习目标，教师提供多种策略来满足学生多样的学习需要，如提供工具，搭建脚手架，并以“微”研究性学习的方式展开教学，给学生提供了充分的进步空间。     

Mechanical properties decay and morphological behaviour of biodegradable films for agricultural mulching in real scale experiment

The use of plastic materials in agriculture causes the serious drawback of huge quantities of waste. The introduction of biodegradable materials, which can be disposed directly into the soil, can be one possible solution to this problem. Biodegradable materials are actually innovative materials; therefore, their physical properties must be evaluated in relation to their functionality during the use in field. In the present research results of experimental tests carried out on biodegradable films used in strawberries protected cultivation are presented. The decay of some relevant physical parameters of biodegradable films during the cultivation period was monitored by laboratory tests (SEM analysis, mechanical tensile tests and infrared reflectance spectroscopy). Infrared spectroscopy clearly indicated that the mechanical degradation starts from the starch component of the material. Tensile tests showed that the value of elongation at break of biodegradable materials decreased in some cases by 300% after 10 days of field application.     

功能性超薄有序分子沉积膜的制备及其结构研究

1991年G.Decher等首次探讨了阴阳离子与聚电解质交替沉积制备有机超薄膜的方法。我们在完善成膜技术和发展成膜基质的基础上,详细研究了其成膜过程与膜的结构,并定义这种新的自组装超薄有序膜为分子沉积膜——MD膜。MD膜是利用阴阳离子的静电吸附反应特性,通过相反离子体系的交替分子沉积制备的层状有序自组装多层超薄膜。需要指出的是,分子沉积既是有机超薄膜的制备技术,本身又是一种自组装超薄有序膜。MD膜制备工艺简单,热稳定性和长期稳定性好,不受基体形状与面积限制。     

4-氯酚在TiO2纳米膜上光催化降解及反应动力学特征

氯酚(ＣＰ)化合物被广泛应用于木材防腐、金属防锈及杀虫剂等,因其毒性大、难降解,对环境造成严重污染[1,2]。目前用于ＣＰ的光催化降解的ＴｉＯ2粉体悬浮体系,催化剂不易回收利用。本文采用Ｓｏｌ Ｇｅｌ法制备的负载型ＴｉＯ2纳米粒子膜作为光催化剂,对4 ＣＰ进行了降解实验研究。同时应用ＸＲＤ法表征了不同实验条件下薄膜中ＴｉＯ2的晶相结构和粒度,考察了不同层数ＴｉＯ2膜的光催化活性,并对4 ＣＰ的降解条件及反应动力学特征进行了探讨。1　实验部分1.1　玻璃负载ＴｉＯ2膜的制备与表征[3-5]按照钛酸四丁酯∶无水乙醇∶水=3∶12∶…     

Sol-Gel Routes to Zeolite Membranes and Thin Films

The synthesis of zeolite membranes and thin films using the secondary growth process is briefly described. In this process colloidal zeolite particles (sols) are prepared hydrothermally and then subsequently deposited on substrates to produce uniform layers of controlled thickness, as illustrated with silicalite and zeolite-A. The formation and growth of the zeolite sols has been investigated in situ by small angle neutron scattering (SANS). SANS measurements on silicalite sols at progressively higher concentrations have provided details of the colloid interactions which lead to zeolite gel-layer structures which are uniform and free of defects.     

The effects of polymer chain rigidification, zeolite pore size and pore blockage on polyethersulfone (PES)-zeolite A mixed matrix membranes

The polyethersulfone (PES)-zeolite 3A, 4A and 5A mixed matrix membranes (MMMs) were fabricated with a modified solution-casting procedure at high temperatures close to the glass transition temperatures (T_g) of polymer materials. The effects of membrane preparation methodology, zeolite loading and pore size of zeolite on the gas separation performance of these mixed matrix membranes were studied. SEM results show the interface between polymer and zeolite in MMMs experiencing natural cooling is better (i.e., less defective) than that in MMMs experiencing immediate quenching. The increment of glass transition temperature (T_g) of MMMs with zeolite loading confirms the polymer chain rigidification induced by zeolite. The experimental results indicate that a higher zeolite loading results in a decrease in gas permeability and an increase in gas pair selectivity. The unmodified Maxwell model fails to correctly predict the permeability decrease induced by polymer chain rigidification near the zeolite surface and the partial pore blockage of zeolites by the polymer chains. A new modified Maxwell model is therefore proposed. It takes the combined effects of chain rigidification and partial pore blockage of zeolites into calculation. The new model shows much consistent permeability and selectivity predication with experimental data. Surprisingly, an increase in zeolite pore size from 3 to 5 Å generally not only increase gas permeability, but also gas pair selectivity. The O₂/N₂ selectivity of PES-zeolite 3A and PES-zeolite 4A membranes is very similar, while the O₂/N₂ selectivity of PES-zeolite 5A membranes is much higher. This implies the blockage may narrow a part of zeolite 5A pores to approximately 4 Å, which can discriminate the gas pair of O₂ and N₂, and narrow a part of zeolites 3A and 4A pores to smaller sizes. It is concluded that the partial pore blockage of zeolites by the polymer chains has equivalent or more influence on the separation properties of mixed matrix membranes compared with that of the polymer chain rigidification.     

The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.     

CARRIER PHOTOGENERATION IN POLY（N-VINYL-CARBAZOLE）-BASED PHOTOCONDUCTIVE THIN-FILM DEVICES

In this paper, photoexcitation processes in the bilayer devices based on inorganic materials and poly（N-vinylcarbazole） （PVK） were investigated. In order to clarify the roles of inorganic materials in photoconductive properties of bilayer devices, TiO2 and ZnS were chosen to combine with PVK. A model for generation of photocurrent （Iph） in single layer device of PVK was obtained. It is deduced that the recombination rate constant （Pcomb） and the ionization rate constant （y） ofexcitons should be considered as the most important factors for Iph. For inorganic materials （TiO2 or ZnS）/PVK bilayer devices, in reverse bias of-4 V, the photocurrent of 115 mA/cm^2 in the TiO2/PVK device was observed, but the photocurrent in the ZnS/PVK device was only 10 mA/cma under the illumination light of 340 nm and the light intensity of 14.2 mW/cm^2. The weaker photocurrent is attributed to the absorption of ZnS within UV region and the energy offset at the interface between PVK and ZnS, which impedes the transport of charge carriers.     

含有偏好的DEA-BWM评价方法研究

针对传统的DEA模型在评估过程中并未考虑决策者对相关指标权重的偏好,将最优最差方法(BWM)嵌入到传统DEA模型中,基于决策者偏好排序的判断矩阵,构建一种含有偏好的DEA-BWM评价方法。首先在保持传统DEA方法的优势基础上,构建了CCR-BWM评价模型对各DMU进行评价。同时考虑为了便于各决策单元在统一权重基础上相互比较,构建了CSW-BWM公共权重模型。另外考虑决策单元自评和互评,构建了NCE-BWM中立型交叉效率。然后采用min-max方法分别将上述三种多目标评价模型转换为单目标线性规划进行求解。最后,选择一组算例对三种模型的有效性与合理性进行验证。