Electrical, dielectric and surface wetting properties of multi-walled carbon nanotubes/nylon-6 nanocomposites

This paper reports that the multi-walled carbon nanotubes(MWCNT)/nylon-6 (PA6) nanocomposites with different MWCNT loadingshave been prepared by a simple melt-compounding method. Theelectrical, dielectric, and surface wetting properties of theCNT/PA6 composites have been studied. The temperature dependence ofthe conductivity of the CNT/PA6 composite with 10.0 wt{\%} CNTloading ($\sigma _{\rm RT} \sim 10^{-4}$ S/cm) are measured, andafterwards a charge-energy-limited tunnelling model (ln $\sigma (T)\sim T^{-1/2})$ is found. With increasing CNT weight percentage from0.0 to 10.0 wt%, the dielectric constant of the CNT/PA6composites enhances and the dielectric loss tangent increases twoorders of magnitude. In addition, water contact angles of theCNT/PA6 composites increase and the composites with CNT loadinglarger than 2.0 wt%even become hydrophobic. The obtainedresults indicate that the electrical and surface properties of thecomposites have been significantly enhanced by the embedded carbonnanotubes.     

Kinetics of self-interstitials reactions in p-type silicon irradiated with alpha particles

New findings on the self-interstitial migration in p-type silicon are presented. They are based on experimental studies of the formation kinetics of defects related to interstitial carbon after irradiation with alpha particles. The main parameters characterizing the interaction rate of silicon self-interstitials with substitutional carbon atoms have been determined. A preliminary interpretation of the experimental data is given. The interpretation takes into account different diffusivities of self-interstitials in their singly and doubly ionized states.     

Field—ion microscopy observation of single—walled carbon nanotubes

Field-ion microscopy(FIM),a tool for surface analysis with atomic resolution,has been employed to observe the end structure of single-walled carbon nanotubes(SWCNTs).FIM images revealed the existence of open SWCNT ends,Amorphous carbon atoms were also observed to occur around SWCNTs and traditional field evaporation failed to remove them.Heat treatment was found to be efficacious in altering the end structures of SWCNT bundles.Carbon and oxygen atoms released from heated tungsten filament are believed to be responsible for the decoration imposed on the SWCNT ends.     

基于选择性模型组合的三维荧光光谱水质分析方法

为提高三维荧光光谱水质分析的精度,提出一种选择性模型组合方法,采用相关系数法对三维荧光光谱激发波长进行选择,并将被选中的激发波长下的荧光发射光谱水质分析子模型采用岭回归法进行模型组合,得到对水质指标的组合模型。以一组总有机碳(TOC)范围在3.41～125.35 mg·L-1,化学需氧量(COD)范围在22.80～330.60 mg·L-1的32个地表水和城市生活污水水样做为研究对象,对其三维荧光光谱220～400 nm范围内的10个激发波长采用上述方法进行选择,分别针对TOC和COD指标筛选出260,280,400 nm和220,280,400 nm各3个激发波长。采用部分最小二乘方法建立上述激发波长下荧光发射光谱水质分析子模型,根据岭回归法计算各子模型的组合系数,分别得到对TOC和COD指标的组合模型。实验结果表明：采用该方法得到的组合模型对TOC和COD两种指标的预测误差均方根(RMSEP)相比精度最高的单一荧光发射光谱子模型分别减小了15.4%和17.5%,相比未经模型选择的组合模型分别减小了6.1%和10.9%。     

Influence of Cu electroplating solutions on boron carbon nitride (BCN) film

Cu electroplating is required for the fabrication of Cu/low-k interconnections. The permeation of a plating solution into low-k films during Cu electroplating is a serious challenge for 45-nm nodes and more complex devices. We investigated the influence of Cu electroplating solutions on boron carbon nitride (BCN) as a low-k film. After dipping it into a Cu electroplating solution that contained additives, the BCN film's hydrophilic surface changed to a hydrophobic surface, and the incorporation of water into the BCN film was suppressed by surfactant adsorption. Sulfuric residue was detected on the BCN sample by thermal desorption spectroscopy after treatment in the Cu electroplating solution with additives; however, it was found through electrical measurements that this solution did not affect the leakage current or the dielectric constant of the BCN film. We successfully fabricated an electroplating Cu layer on a BCN film with good adhesion, and we believe that this BCN film is a sufficiently useful material for Cu/BCN integration in LSI.     

Density functional theory study of surface catalysis and adsorption on several elements in Group I-B and VIII

This review deals with the high-throughput field in surface catalysis and adsorption. Special focus is placed on advanced methods for knowledge discovery such as density functional theory (DFT) simulations. An inventory of successful cases on several elements in Group I-B and VIII is reported, including the relevant data and knowledge management, which are very important in chemical industry, fuel cell, and environment protection, for both scientific and economical reasons.      

碳原子1s~22s~22pns~3P态的能量和波函数

提出了构造碳原子1s~22s~22pns~3P态波函数的新方法,以Rayleigh-Ritz变分法为基础开发了一套计算碳原子1s~22s2~2pns~3P态波函数和能量的Mathemtica程序,具体计算了碳原子1s~22s~22pns~3P(n=3～6)态的波函数和非相对论能量及其相对论修正值(包括质量修正、单体达尔文修正、双体达尔文修正、自旋-自旋接触相互作用修正),计算结果与实验值非常接近.     

FTIR spectra of plasticized high molecular weight PVC–LiCF3SO3 electrolytes

Fourier transform infrared spectroscopy studies have been conducted to investigate the interaction among components in a system of high molecular weight polyvinylchloride (PVC)–lithium trifluoromethanesulfonate (LiCF₃SO₃) incorporated with different type of plasticizers, namely, ethylene carbonate (EC), propylene carbonate (PC), and dibutylphthalate (DBP). Interaction between PVC and LiCF₃SO₃ was confirmed by C–H rocking mode at 1,255 cm⁻¹ for PVC shift to 1,252 cm⁻¹ in PVC–LiCF₃SO₃. The plasticizers’ carbonyl (C=O) oxygen atom which carries lone pair electrons interact with Li⁺ of LiCF₃SO₃ and methine hydrogen of PVC in LiCF₃SO₃–plasticizer system and PVC–plasticizer system, respectively. Changes in peaks assigned to 1,264 cm⁻¹ (ν _as(SO₃)), 1,033 cm⁻¹ (ν _s(SO₃)), 1,181 cm⁻¹ (ν _as(CF₃)), 1,230 cm⁻¹ (ν _s(CF₃)), 765 cm⁻¹ (δ _s(CF₃)), 644 cm⁻¹ (δ _s(SO₃)), 578 cm⁻¹ (δ _as(CF₃)), and 519 cm⁻¹ (δ _as(SO₃)) indicate the occurrence of complexation in the PVC–LiCF₃SO₃ system, LiCF₃SO₃–plasticizer system, and PVC–LiCF₃SO₃–plasticizer system.     

基于石墨相氮化碳量子点直接荧光猝灭法检测碘离子的研究

石墨相氮化碳(g-C₃N₄)荧光纳米材料具有原料便宜、制备容易、荧光量子产率高、光学稳定性好、毒性低等优点,并且避免有机荧光染料复杂的合成步骤或者金属半导体量子点对环境潜在的危害,这些优点使得g-C₃N₄纳米材料成为新兴的荧光探针用于检测金属离子。最近,已有文献报道重金属汞离子能够高灵敏高选择性地猝灭g-C₃N₄量子点的荧光,加入碘离子能够提取被键合的汞离子形成碘化汞(HgI₂)进而恢复g-C₃N₄量子点的荧光,从而建立一种高灵敏检测碘离子的荧光传感器。然而,该方法依然需要重金属汞离子的参与,限制了该方法的推广应用。通过硝酸氧化块体g-C₃N₄并结合水热法处理制备了一种水溶性好、荧光强度高的g-C₃N₄量子点。该量子点的荧光发射波长位于368 nm,且其荧光发射波长不随激发波长的改变而改变,表明该量子点的尺寸比较均一。笔者发现碘离子在220 nm处有一个较强的吸收峰,与该量子点的激发光谱(中心波长245 nm)具有较大的重叠,从而产生内滤效应引起该量子点的荧光发生猝灭。利用这一性质,构建了一种选择性检测碘离子的新型荧光传感器。在最优检测条件下,g-C₃N₄量子点的荧光猝灭强度(ΔF)与碘离子浓度(X,μmol·L-1)在10～400 μmol·L-1之间具有良好的线性关系,线性方程为ΔF=0.325 79X+6.039 05(R2=0.999 5),检出限为5.0 μmol·L-1。通过“混合即检测”并且不需要借助与重金属离子的配位作用就能够检测碘离子,因此该方法具有快速、环保以及操作简便等优点。     

Manufacturing of Volumetric Glass–Based Composites with Single‐ and Double‐QD Doping

Quantum dot (QD)‐based light‐emitting materials are gaining increased attention because of their easily tunable optical properties desired for various applications in biology, optoelectronics, and photonics. However, few methods can be used to manufacture volumetric materials doped with more than one type of QD other than QD‐polymer hybrids, and they often require complicated preparation processes and are prone to luminescence quenching by QD aggregation and separation from the matrix. Here, simultaneous doping of a volumetric glass‐based nanocomposite with two types of QDs is demonstrated for the first time in a single‐step process using the nanoparticle direct doping method. Glass rods doped with CdTe, CdSe/ZnS, or co‐doped with both QDs, are obtained. Photoluminescence and lifetime experiments confirm temperature‐dependent double emission with maxima at 596 and 720 nm with mean lifetimes up to 16 ns, as well as radiative energy transfer from the short wavelength–emitting QDs to the long wavelength–emitting QDs. This approach may enable the simple and cost‐efficient manufacturing of bulk materials that produce multicolor luminescence with cascade excitation pumping. Applications that could benefit from this include broadband optical fiber amplifiers, backlight systems in LCD screens, high‐power LEDs, or down‐converting solar concentrators used to increase the efficiency of solar panels.