Characterization of thermo-oxidative stability of polymer optical fibers using chemiluminescence technique

The thermo-oxidative stability of commercially available polymer optical fibers (POFs) and their components (cores and claddings) was investigated. All the bare POFs (core and cladding only) studied here were based on poly(methyl methacrylate) (PMMA) core. The fibers were exposed to 100 °C/low humidity for about 4200 h. Chemiluminescence (CL) technique was applied to investigate the thermo-oxidative stability and for measuring the transmission loss during exposure a prototype device called multiplexer was used. POFs exhibited variation in thermo-oxidative stability although they possessed identical core material PMMA. This was due to difference in the chemical compositions of claddings. Claddings were more susceptible to the thermo-oxidative degradation compared to cores. The thermo-oxidative degradation of both the cladding and the core was found in POFs as a result of climatic exposure. POFs showed an early drop-off followed by a slow decline of transmission. The early drop-off of transmission was attributed to physical changes like thermal expansion and the slow decline of transmission to chemical changes like oxidative degradation of POFs. A good linear relationship between optical transmission stability and thermo-oxidative stability of POFs was established from these studies.     

Chemical modification of polymer surfaces: a review

The main approaches that have been taken to chemically modify polymer surfaces are introduced and reviewed. These are wet chemical oxidation, plasma treatment, classical organic chemistry, and attachment of polymer chains. The extent to which each of these approaches can produce the specific modifications desired is discussed, and any unwanted effects that commonly occur are cited. Finally, the need for using several methods of surface analysis in concert to obtain adequate surface characterization is described.     

Micro-sized Sb2O3 octahedra fabricated via a PEG-1000 polymer-assisted hydrothermal route

The micro-sized Sb₂O₃ octahedra can be synthesized on a large scale via a simple PEG-1000 polymer-assisted hydrothermal route (PAHR) in the temperature range of 160-180 °C for 10-14 h. The structures, compositions, and morphologies of the as-synthesized products are derived from X-ray power diffraction pattern, X-ray photoelectron spectra, and field emission scanning electronic microscope. Meanwhile, the optical properties of the micro-sized Sb₂O₃ octahedra are studied by their photoluminescene spectroscopy and Raman spectrum. Furthermore, the possible growth mechanism of the micro-metered Sb₂O₃ octahedra is discussed on the basis of a series of supplementary experiments. And it has been found that PEG-1000, sodium tartrate, the reaction temperature, and the reaction time have considerable effects on the final morphology of Sb₂O₃, while the pH value has an influence on the formation of the Sb₂O₃ crystals.     

PERFORMANCE IMPROVEMENT OF POLYMERS BY THE ADDITION OF GRAFTED NANO-INORGANIC PARTICLES

An irradiation grafting method was applied for the modification of nanoparticles so that the latter can be added topolymeric materials for improving their mechanical performance using existing compounding techniques. The followingitems are discussed in this paper: (a) chemical interaction between the grafting monomers and the nanoparticles duringirradiation, (b) properties including modulus, yield strength, impact strength and fracture toughness of the resultantcomposites, and (c) possible morphological changes induced by the addition of nanoparticles. Though irradiation graftingpolymerization, nanoparticle agglomerates turn into a nano-composite microstructure (comprised of the nanoparticles and thegrafted, homopolymerized secondary polymer), which in turn builds up a strong interfacial interaction with the surrounding,primary polymeric matrix during the subsequent mixing procedure. Due to the fact that different grafting polymers broughtabout different nanoparticle/matrix interfacial features, microstructures and properties of the ultimate composites could thusbe tailored. It was found that the reinforcing and toughening effects of the nanoparticles on the polymer matrix can be fullybrought into play at a rather low filler loading in comparison to conventional particulate filled composites.     

刚性微粒填充高聚物的宏观本构关系

用微观力学和统计方法研究了含损伤过程的刚性粒子填充高聚物的非线性本构关系．在材料的变形过程中，粒子与基体间界面的开裂引发微孔洞的成核与长大，这虽然弱化了材料的宏观力学性能，但是带来了宏观本构的非线性效应，这为材料的增韧奠定了基础．该文分析了刚性粒子对材料的强化作用和微孔洞演化对材料的弱化作用，以及这两种竞争机制的耦合效应对宏观本构关系的影响，并从理论上给出了界面强度，粒径分散度，平均粒径等参量对材料宏观力学行为影响的定量分析结果．     

Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.     

含液晶聚合物的原位复合材料中界面相容性的改善策略

综述了近年来含液晶聚合物的原位复合材料中增容技术的一些进展,主要了四种增容技术,即加入具有增容作用的第三组分;在分散相液晶聚合物的主链上引入与基体树脂主链中相同或相似的单元,酯交换反应和多元共混技术,简要描术字原位复合材料的发展趋势。     

Production of submicron-size monodisperse polymer particles having aldehyde groups by the seeded aldol condensation polymerization of glutaraldehyde (II)

Submicron-size monodisperse polystyrene/polyglutaraldehyde (PS/PGLA) composite particles having aldehyde groups at the surfaces were produced by the seeded aldol condensation polymerization of glutaraldehyde at various temperatures of 040°C. Since a part of aldehyde groups was consumed by the Cannizzaro reaction (hemiacetal formation) as a intermolecular reaction of PGLA, the amount of aldehyde groups on PS/PGLA composite particles was varied by the competition between the aldol condensation reaction and the Cannizzaro reaction at the various temperatures.Part CXXXIX of the series Studies on Suspension and Emulsion     

Assembled catalyst of palladium and non-cross-linked amphiphilic polymer ligand for the efficient heterogeneous Heck reaction

The efficient heterogeneous Heck reaction was achieved by a new networked and supramolecular catalyst PdAS-V (1b). Employing of PdAS-V in 5.0×10⁻⁵ mol equiv. efficiently progressed the heterogeneous Heck reaction of a series of aryl iodides with acrylates, styrenes and acrylic acid. PdAS-V was successfully recycled five times without any decrease in its activity, and showed good stability in toluene and water, and hence the Heck reaction was efficiently performed in both reaction media. The use of 8.0×10⁻⁷ mol equiv. of PdAS-V resulted in the coupling product in 92% yield with the turnover number (TON) and the turnover frequency (TOF) of PdAS-V reached up to 1,150,000 and 12,000, respectively. The efficient synthesis of resveratrol was achieved via the PdAS-V-promoted Heck reaction.     

聚苯撑的合成、性能及其应用

对直链型、树枝形聚苯撑的合成、性能及其应用作了介绍，并着重描述了聚苯撑的应用。