一种包覆型聚合物高效液相色谱固定相的制备与评价

当代应用最广的HPLC固定相中,硅胶基质填料化学稳定性较低,并且由于残存硅羟基而表现所谓第二效应,特别使碱性化合物的峰形拖尾;聚合物基质填料虽提高了化学稳定性,没有离子基团,但刚性降低,并且由于溶胀难于进行梯度淋洗;面包覆型聚合物填料则可综合二者的优点,本文对我们制备的这种固定相作初步报道。     

Direct coupling of capillary supercritical fluid chromatography with double-focusing high resolution mass spectrometry

An integral restrictor interface with jet separator for coupling capillary column supercritical fluid extraction – supercritical fluid chromatography with high resolution mass spectrometry (SFE-SFC-MS) has been built and used for the analysis of a fatty acid ester, and of polymer additives with a wide range of masses. The mobile phase used was supercritical carbon dioxide; a flame ionization detector (FID) was used in parallel with the mass spectrometer. Different SFC-MS interface operating conditions, e.g. temperature, restrictor position, flow rate, and sample transfer conditions were optimized to obtain good sensitivity and separation for these applications. In addition, the sensitivity of measurements performed with the direct insertion probe and by SFC-MS interface have been compared.     

交联助剂对PPC／NBR弹性体结构和性能的影响

研究了马来酸酐（ＭＡ）及异氰脲酸三烯丙酯（ＴＡＩＣ）对聚丙撑碳酸酯／丁腈橡胶共混弹性体结构和性能的影响，发出加入ＭＡ或ＴＡＩＣ能有效地改善交联网络；加入适量ＭＡ能显著改善共混弹性体热氧老化稳定性；加入ＴＡＩＣ使共混弹性体具有优良的高弹特性和力学性能。     

合成高分子膜透气速率的温度依赖性

近年来以气体选择性分离为目的的合成高分子膜的研究取得了巨大的进步。气体分离膜的两个基本性能参数是透气速率J及选择系数α。同一个膜,在较高温度使用时,往往是J值增大,α值下降,因此选择适当地操作温度,以便得到最佳的J-α搭配是很重要的。本文讨论了甲基硅橡胶(MSR)、天然橡胶(NR)、乙丙橡胶(EPR)、聚乙烯(PE)、聚(4-甲基戊烯-1)(TPX)等材料的均质膜或复合膜,在不同温度下的氧、氮透过速率,计算了各种膜材料的氧、氮表观透过活化能,并对其本质进行了探讨。     

聚酰亚胺的性能、应用及发概况

介绍了近年来聚酰亚胺（PI）的发展状况，总结了它们的结构特点、性能改进和在各领域的应用．为高性能的工程塑料的研究提供了基本资料。     

Synthesis of sodium-polystyrenesulfonate-grafted nanoparticles by core-cross-linking of block copolymer micelles

Sodium poly(styrenesulfonate)(polySSNa)-grafted polymer nanoparticles were synthesized by core-cross-linking of block copolymer micelles and subsequent chemical transformation. Block copolymers, poly(p-((1-methyl)silacyclobutyl)styrene-block-poly(neopentyl p-styrenesulfonate)s, polySBS-b-polySSPen, were synthesized by nitroxy-mediated living radical polymerization. The block copolymers formed micelles (R_h=15-23 nm, where R_h represents the hydrodynamic radius) with a polySBS core and polySSPen shell in acetone. The micelle core was cross-linked by ring-opening polymerization of silacyclobutyl groups in polySBS. Hydrolysis of the neopentyl groups provided polySSNa-grafted nanoparticles. The R_h of the particles before the hydrolysis ranged from 12 to 21 nm in acetone, while they varied to the range from 50 to 110 nm in water after the hydrolysis.     

α－甲基苯乙烯对HIPS／SBS共混物流变行为及力学性能的影响

用锥板式流变仪研究了α－ＭＳ对ＨＩＰＳ／ＳＢＳ共混物流动行为的影响，结果表明：不同α－ＭＳ用量的共混物和如曲线相似．均随增加τ＿ｗ增大、η＿ａ下降。流动指数，ｎ均小于１为非牛顿假塑性流体。加入少量（约２．５％）α－ＭＳ使共混物熔融指数提高３倍，其总体力学性能变化不大。     

Activity coefficients of electrolytes from the E.M.F. of liquid membrane cells. II - multicharged electrolyte solutions

The activity coefficients of Co(en)₃Cl₃ and K₂SO₄ were measured by means of a cell with ion-exchange liquid membranes following the method described in paper I. The results prove that this method is even more valuable with multicharged salts than with 1-1 electrolytes. The values obtained are precise and reliable down to dilution limits never before accessible, e.g., 4×10^–5 mol-kg^–1 in Co(en)₃Cl₃. High dilution levels are of particular importance when dealing with highly charged electrolytes since the trend at higher concentrations often leads to errors both in extrapolation to infinite dilution and in the absolute activity coefficients. As an application, the activity coefficients of [Co(en)₃]₂(SO₄)₃-suspected to be wrongly evaluated in past literature-were measured, and their values at low concentrations were actually lower than those quoted before.     

Ag+ ion transport studies in a polyvinyl alcohol-based polymer electrolyte system

Thick films of pure polyvinyl alcohol and polyvinyl alcohol doped with silver nitrate with different compositions have been prepared by solution cast technique. The FT-IR spectrum confirms the complexation process. The conductivity of the pure polyvinyl alcohol is of the order of 10⁻⁷ Sm⁻¹ at 90 °C, and its value increases by two orders of magnitude when doped with 20 wt% of AgNO₃. The activation energy, calculated from the Arrhenius plot for all compositions of the poly vinyl alcohol doped with silver nitrate, is between 0.24 and 0.35 eV. The migration energy for the ion in polymer electrolyte has been calculated from the modulus spectrum, and is in good agreement with the activation energy calculated from the Arrhenius plot. The modulus spectra indicate the non-Debye nature of the material.     

An NMR study of methanol diffusion in polymer electrolyte fuel cell membranes

Methanol diffusion in two polymer electrolyte membranes, Nafion 117 and BPSH 40 (a 40% disulfonated wholly aromatic polyarylene ether sulfone), was measured using a modified pulsed field gradient NMR method. This method allowed for the diffusion coefficient of methanol within the membrane to be determined while immersed in a methanol solution of known concentration. A second set of gradient pulses suppressed the signal from the solvent in solution, thus allowing the methanol within the membrane to be monitored unambiguously. Over a methanol concentration range of 0.5–8 M, methanol diffusion coefficients in Nafion 117 were found to increase from 2.9 × 10⁻⁶ to 4.0 × 10⁻⁶ cm² s⁻¹. For BPSH 40, the diffusion coefficient dropped significantly over the same concentration range, from 7.7 × 10⁻⁶ to 2.5 × 10⁻⁶cm² s⁻¹. The difference in diffusion behavior is largely related to the amount of solvent sorbed by the membranes. Increasing the methanol concentration results in an increase in solvent uptake for Nafion 117, while BPSH 40 actually excludes the solvent at higher concentrations. In contrast, diffusion of methanol measured via permeability measurements (assuming a partition coefficient of 1) was lower (1.3 × 10⁻⁶ and 6.4 × 10⁻⁷ cm² s⁻¹ for Nafion 117 and BPSH 40 respectively) and showed no concentration dependence. The differences observed between the two techniques are related to the length scale over which diffusion is monitored and the partition coefficient, or solubility, of methanol in the membranes as a function of concentration. For the permeability measurements, this length is equal to the thickness of the membrane (178 and 132 μm for Nafion 117 and BPSH 40 respectively) whereas the NMR method observes diffusion over a length of approximately 4–8 μm. Regardless of the measurement technique, BPSH 40 is a greater barrier to methanol permeability at high methanol concentrations.