考虑壁面滑移的Z-W流变模型及其应用

总结了聚合物熔体在剪切溶场壁面滑移研究的成果，提出了Z－W模型的物理概念。该模型考虑了界面分子链和固体壁面间解吸－吸附而发生的滑移。界面分子链和内部分子链间解缠－重新缠结而发生的表观滑移以及变形摩擦滑移。在稳态简单剪切流运过程，模型可以化简为应力和应变的二次微分方程，说明了壁面滑移来源于Cohesive滑移和Adhesive滑移两部分，对于自激振荡相关的多重内振荡和多重外振荡进行了归纳，应用统一模型定性地解释了毛细管实验中剪切应力的非线性，瞬态自激振荡、滑－粘转换和鲨鱼皮等现象，在聚合物熔体振动剪切流动（LAOS）中，统一模型可以简化为杜芬方程，通过模拟发现，该模型可解释小应变振幅下振动剪切时的线性流变行为和在大振幅振动流动中的复杂非线性行为。非线性行为与熔体粘弹性以及近壁面界面层的性质有关，统一模型在特殊情况下还可以简化Joshi模型，结构网络模型，Hatzikiriakos或等效的Graham模型，可见，Z－W模型内内涵比较丰富，适用面较广，也从一个侧面说明该模型具有相当的合理性。     

1,4-丁炔二醇的均聚及与苯乙炔的共聚研究

<正> 炔类聚合物由于具有长链π体系的结构特点,理论上可作为结构型导电聚合物,这一领域的研究工作正在迅速展开。 1,4-丁炔二醇(BD)可用PdCl_2,ZnCl_2,(Ph_3P)_2PdCl_2等多种催化剂催化聚合,得到长链共轭的聚(1,4-丁炔二醇)(PBD)。苯乙炔(PA)可用热聚合,光聚合、电聚合、自由基聚合、等离子体聚合、催化聚合等聚合方法,得到长链共轭的聚苯乙炔     

Carboxylic acid functionalization of nylon 6 by radiation grafting and conversion to zinc salts: Effects on physical properties

 Functionalization of polymers by grafting monomeric species on to the backbone of molecular chains with the use of γ-radiation has been used extensively. In this work methacrylic acid was grafted onto a commercial grade of polycaproamide (Nylon 6) by preirradiating the polymer granules to 15 kGy at a rate of 1.0 kGy per hour and subsequently immersing these in a 10% aqueous solution of methacrylic acid in the presence of small quantities of FeSO₄ as homopolymerization inhibitor. The polymer was subsequently neutralized by mixing it with zinc acetylacetonate in a laboratory scale melt mixing device. The acid-grafting polymer modification resulted in an increase in glass transition temperature, while the addition of zinc acetylacetonate gave rise to two transitions: The lower transition corresponds to a miscible mixture of free polyamide and acid-grafted polymer, both plasticized with undecomposed zinc compound, while the upper transition corresponds to the zinc salt of the acid grafted polyamide. Through rheological measurements it was shown that both the acid-grafted polymer and the derived zinc salt have a branched structure, possibly containing also some crosslinked domains. Large improvements in solvent resistance were observed for both type of polymer modifications. Received: 13 December 1996 Accepted: 10 February 1997     

氟化氢与涂有聚合物膜下二氧化硅的反应研究

ＨＦ与ＳｉＯ２的反应是一种亲核取代反应，但高温下此反应不能发生．当涂覆在ＳｉＯ２表面的聚合物膜中含有某些特殊的有机化合物或超强酸时，可以促进该反应的发生，这些化合物被称为诱蚀剂．诱蚀剂分三类：（１）三级胺与ＨＦ形成季铵盐得到浓度很高的氟阴离子使该反应很容易发生；（２）强的偶极非质子官能团化合物与ＨＦ中的氢形成氢键使氟的亲核活性增加，有助于该反应发生；（３）超强酸因其质子对ＳｉＯ２骨架中氧的牢固结合能力活化了反应的离去基团，对ＨＦ与ＳｉＯ２的亲核反应起到催化作用．聚合物膜对添加在其中的小分子诱蚀剂起到阻止逃逸的栅栏作用，而本身带有诱蚀官能团的聚合物可以同时充当成膜物及诱蚀剂的作用．通过光化学反应可以选择性地实现聚合物膜下ＨＦ与ＳｉＯ２的刻蚀反应．     

Complexation of well-controlled low-molecular weight polyelectrolytes with antisense oligonucleotides

The influences of polymer-related properties such as molecular weight, charge density, counter ion, and hydrophilic block on the complexation of polyelectrolytes and a fluorescein-labeled oligonucleotide (ON) were investigated. A series of well-defined and well-controlled 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA) polymers and block copolymers were prepared using living anionic and radical polymerization methods. Fluorescence measurement was used to reveal the effects of polymer molecular weight, charge density, and counter ion type on the complexation. PolyDMAEMA samples having double molecular weights of the chosen oligonucleotide gave the optimal complexation performance. Kinetic studies showed that high-molecular weight/high-charge density polymer samples produced very stable complexes. The fully charged polyDMAEMA displayed the strongest binding with the ON. These complexes were therefore less sensitive to the changes in the environment. PolyDMAEMA–DMSQ samples had slightly higher complexation ability than polyDMAEMA–MCQ (DMSQ: dimethylsulfate quat; MCQ: methylchloride quat). Both poly(DMAEMA-b-HEMA) and poly(DMAEMA–MCQ-b-PEG) block copolymers showed good complexation ability and steric stability [HEMA: 2-hydroxyethyl methacrylate; PEG: poly(ethylene glycol)]. PEG, but not HEMA block, enhanced the effectiveness of polyDMAEMA–MCQ binding with the ON.     

聚氯乙烯—丁腈橡胶—氯丁橡胶三元共混物的研究

测定了聚氯乙烯（ＰＶＣ）－丁脯橡胶（ＮＢＲ－２９）－氯丁橡胶（ＣＲ）三元共混物的冲击性能和应力－应变行为，用动态力分析、扫描电和透射电镜研究了共混物的相容性和形态结构。结果表明，ＮＢＲ－２９对ＰＶＣ，ＣＲ有良好的增容作用，三元共混物是部分相容的二相体系，具有良好的抗冲击性能。     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

The use of ATR-IR to identify the components separated by paper chromatography

Summary A modified procedure for the identification of separated components in paper chromatography using attenuated total reflection infrared spectroscopy is described. This combined method, though inferior in sensitivity and resolution to the modern separation systems interfaced with sophisticated analytical instruments, is simple, relatively less expensive and suitable for routine analysis of components like polymer additives.     

贫水电解质体系制备多孔阳极氧化铝模板的研究

在有机溶剂为主的含草酸电解质中,研究了大孔径有序度高的阳极氧化铝(AAO)的一步法电化学制备.实验证实,电解质中水含量的降低能够有效抑制铝的电氧化速率和溶解速率,使得其氧化膜孔道的生长能够稳定进行,所得到的六方孔道排列有序度明显高于纯水溶剂制备的电解质体系下的产物.考察了水含量、有机溶剂种类以及电解质浓度对AAO模板孔道形貌的影响.结果表明,有机溶剂贫水电解质体系使得电氧化电压的选取范围比水溶液电解质体系更宽,孔径连续可调,反应条件温和.该方法适合于制备均匀大孔径的AAO模板.     

Characterization of n-butyl acrylate centered triads in poly(n-butyl acrylate-co-carbon monoxide-co-ethylene) by isotopic labeling and two dimensional NMR

Poly(n-butylacrylate-co-carbon monoxide-co-ethylene) (polyEBC) samples prepared from 13C-labeled monomer, n-butyl acrylate, were characterized using two dimensional (2D) pulsed field gradient (PFG) 750 MHz NMR spectroscopy. To elucidate the complex structure of the terpolymer, 2D-1H/13C-heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) experiments were conducted by selectively exciting the enhanced resonances in the spectra of two polymer samples, one polymer resulting from synthesis with 1-13C-n-butylacrylate monomer and a second polymer obtained from a synthesis with 2-13C-n-butylacrylate monomer. High-resolution 2D-NMR combined with 13C-labeling of the polymer greatly simplifies the 2D-NMR spectra, selectively enhances the weak peaks from low occurrence B-centered triad structures, and aids in their resonance assignments. In all experiments, the sample temperature was 120 degrees C, to ensure a homogeneous solution and sufficient molecular mobility. Electronic Supplementary Material: Supplementary material (1D 13C NMR spectra of the 13C-labeled and unlabeled polymers) is available in the online version of this article at http://dx.doi.org/100.1007/s00216-003-2402-3.