A mean-field,effective medium theory of random binary alloys III. The ising model with competing interactions

The Ising model with competing interactions is studied in a mean field effective medium approach. The phase diagram of such model alloys is studied. We conclude that for all ratios of the competing interaction moments, a spin glass phase always exists at low temperatures for certain concentration regimes.     

Preparation and electrical characterization of (PVC + KBrO3) polymer electrolytes for solid state battery applications

This paper presents results of studies on dc electrical conductivity and transference number measurements on potassium bromate (KBrO₃) complexed polyvinyl chloride (PVC) films prepared by solution cast technique. Temperature dependence of dc electrical conductivity and transference number data indicated the dominance of ion type charge transport in these specimens. The magnitude of conductivity increased with increase in concentration of the salt and temperature. Using this (PVC + KBrO₃) electrolyte, solid-state electrochemical cells were fabricated, and their discharge profiles were studied under a constant load of 100 kΩ. Several cell profiles such as open circuit voltage, short circuit current, power density, and energy density associated with these cells were evaluated and were reported. The features of complexation of the electrolytes were studied by X-ray diffraction and Fourier transform infrared spectroscopy. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

聚合物中长程关联能的动力学研究

本文计算采用扩展的SSH哈密顿模型, 加上长程关联哈密顿量,在自然边界条件下,用绝热动力学方法研究了有限长反式聚乙炔链中平均关联能随时间的演化,计算了长程电子关联对极化子动力学的影响并计算了极化子状态下的长程关联能。结果发现,加入一个电子或空穴,平均关联能的大小随着时间呈非周期性阻尼振荡,经过一定时间后,平均关联能趋近一个恒定值,此时得到比较稳定的极化子位形。当格点增加时,长程关联能趋于恒定的时间逐渐缩短。     

Investigations of Solid State Dynamics at the NRSSR Beamline at PETRA II. An Overview

The present status of the new nuclear resonance beamline PETRA 1 at HASYLAB, DESY, Hamburg is described. Besides an overview of the experimental setup some examples of recent experiments are given. Those cover the main applications, i.e., inelastic scattering from iron alloys and quasielastic scattering from glass-forming liquids. This revised version was published online in August 2006 with corrections to the Cover Date.     

Fe–Mn–Al–C Alloys: a Study of Their Corrosion Behaviour in SO2 Environments

The corrosion reaction of four Fe–Mn–Al alloys exposed to a cycling, dry–humid, SO₂ (0.001% by volume) polluted atmosphere was studied. ICEMS, XPS, AES-SAM and transmission Mössbauer spectroscopy at different temperatures were employed to characterize the corrosion products. The analytical results indicate that (i) ferrihydrite is the main component of the rust; (ii) there is an abundant presence of Mn²⁺ and SO₃ ^2–/SO₄ ^2– on the top of the corrosion layer, the concentration of SO₄ ^2– increasing with the number of cycles; and (iii) the magnetic hyperfine pattern exhibited by the series of low-temperature spectra of the rust is quite different from that observed in the rust formed under similar corrosive environments on iron and weathering steel. This latter finding is correlated with a slow rate of transformation of the Fe³⁺ species formed at the early stages of corrosion into -FeOOH, the usual final product of this type of corrosion processes. The sulphate anions, abundant inside the electrolyte during the wet periods, could be incorporated to the ferrihydrite structure being responsible for the Mössbauer spectral pattern recorded from the corrosion products at low temperatures.     

The effect of HCP on the formation of twin boundaries and dislocations in Ni–Co alloys

In this study, molecular dynamics (MD) was used to simulate the rapid solidification process of Ni₄₇Co₅₃ and Ni₄₈Co₅₂ alloys at a cooling rate of 10¹² K/s. The effects of HCP on the formation of twin boundaries and dislocations in two Ni–Co alloys are studied. It is found that the difference of HCP clusters is the main effect that producing discrepancies on microstructure of two alloys. The number of HCP clusters accounted for 9.23% in Ni₄₇Co₅₃ alloy. They are regularly arranged to form the number of single-layer twin boundaries, and each twin boundary ends in a dislocation. The FCC and HCP structures coexist in the same atomic layers, which is easy to create dislocations. The relatively standard FCC crystal and only 0.32% HCP clusters are formed in Ni₄₈Co₅₂ alloy at 300 K. That small amount of HCP clusters are dispersed on the surface, and cause the formation of dislocation in the border with FCC clusters.     

Improved charge transport and trap-state distribution in donor–acceptor-type semiconducting copolymer with a fluoropolymer dielectric film

This study presents a p-type doping method for donor–acceptor-type conjugated semiconducting copolymer-based field-effect transistors (FETs) with a fluoropolymer dielectric film. The polymeric FET, which initially comprises a non-polar polymer dielectric layer (poly (methyl methacrylate), PMMA), shows ambipolar behavior owing to the well-balanced electron-accepting and -donating properties of the cyclopentadithiophene (CDT) and pyridyl-2,1,3-thiadiazole (PTz)-based conjugated polymer backbone system. However, when combined with an amorphous fluoropolymer (CYTOP) dielectric layer, the FET device exhibits that their ambipolar behavior remarkably changes to a high-performance p-type FET; the hole mobility enhanced by a factor of ~3 and the threshold voltage significantly shifted from −29 V to −12 V. The density of trap states in the CDT-PTz-based polymeric FETs with a CYTOP dielectric layer, which was estimated from the temperature-dependent transfer characteristics, was narrower and shallower than that of polymeric FETs with a PMMA dielectric layer. As such, it can be inferred that the deep-trap states are filled with additional doped charges from the surface polarization induced by the fluorinated dielectrics at the semiconductor-dielectric interface.     

FP-LMTO method to calculate the structural,thermodynamic and optoelectronic properties of SixGe1−xC alloys

The structural and electronic properties of the ternary Si_xGe_1?xC alloys have been calculated using the full-potential linear muffin-tin-orbital (FP-LMTO) method based on density functional theory within both local density approximation (LDA) and generalised gradient approximation (GGA). The calculated equilibrium lattice constants and bulk moduli are compared with previous results. The concentration dependence of the electronic band structure and the direct and indirect band gaps are investigated. Using the approach of Zunger and co-workers, the microscopic origins of the band gap bowing are investigated also. Moreover, the refractive index and the optical dielectric constant for Si_xGe_1?xC are studied. The thermodynamic stability of the alloys of interest is investigated by means of the miscibility. This is the first quantitative theoretical prediction to investigate the effective masses, optical and thermodynamic properties for Si_xGe_1?xC alloy, and still awaits experimental confirmations.     

Adsorption of a spherical nanoparticle in polymer brushes: Brownian dynamics investigation

We use Brownian dynamics simulations to study the adsorption behavior of a nanosized particle in polymer brushes. The adsorption process, the dynamic behavior of the nanoparticle in the brush, the penetration depth, the diffusion coefficient of the nanoparticle in different depths of the brush, and the forces exerted on the nanoparticle by the surrounding brush are all investigated for different grafting densities.