Zusatzeffekt von Tensiden auf die Inkompatibilität zwischen Polymersäuren und nichtionischen Polymeren

Zusammenfassung Das Vorkommen der Ausfällung zwischen Polykarbonsäuren und nichtionischen Polymeren im Wasser wurde durch Zufügung der Tenside (anionisch, kationisch und nichtionisch) beeinflußt. Die Grenzkonzentrationen der Tenside für Auflösung wasserunlöslicher Komplexe von Polymersäuren (Polyakryl- und Polymethakrylsäure) und Polyvinylpyrrolidon (PVP) wurden bestimmt und in Bezug auf die Wechselwirkungen zwischen je zwei Komponenten im ternären System, d. i., Tensid-Polymersäure, Tensid-PVP, und Polymersäure-PVP, erläutert.

---

The precipitation formation between polycarboxylic acids and nonionic polymers in water was suppressed by addition of surfactants (anionic, cationic and nonionic). The critical surfactant concentrations needed for dissolving the precipitates were determined about the water-insoluble complexes of polymeric: acids (polyacrylic and polymethacrylic acids) with polyvinylpyrrolidone (PVP). The results were discussed with regard to each two component interaction in the ternary system, i. e., surfactant-polymeric acid, surfactant-PVP, and polymeric acid-PVP.

     

氟化氢与涂有聚合物膜下二氧化硅的反应研究

ＨＦ与ＳｉＯ２的反应是一种亲核取代反应，但高温下此反应不能发生．当涂覆在ＳｉＯ２表面的聚合物膜中含有某些特殊的有机化合物或超强酸时，可以促进该反应的发生，这些化合物被称为诱蚀剂．诱蚀剂分三类：（１）三级胺与ＨＦ形成季铵盐得到浓度很高的氟阴离子使该反应很容易发生；（２）强的偶极非质子官能团化合物与ＨＦ中的氢形成氢键使氟的亲核活性增加，有助于该反应发生；（３）超强酸因其质子对ＳｉＯ２骨架中氧的牢固结合能力活化了反应的离去基团，对ＨＦ与ＳｉＯ２的亲核反应起到催化作用．聚合物膜对添加在其中的小分子诱蚀剂起到阻止逃逸的栅栏作用，而本身带有诱蚀官能团的聚合物可以同时充当成膜物及诱蚀剂的作用．通过光化学反应可以选择性地实现聚合物膜下ＨＦ与ＳｉＯ２的刻蚀反应．     

Complexation of well-controlled low-molecular weight polyelectrolytes with antisense oligonucleotides

The influences of polymer-related properties such as molecular weight, charge density, counter ion, and hydrophilic block on the complexation of polyelectrolytes and a fluorescein-labeled oligonucleotide (ON) were investigated. A series of well-defined and well-controlled 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA) polymers and block copolymers were prepared using living anionic and radical polymerization methods. Fluorescence measurement was used to reveal the effects of polymer molecular weight, charge density, and counter ion type on the complexation. PolyDMAEMA samples having double molecular weights of the chosen oligonucleotide gave the optimal complexation performance. Kinetic studies showed that high-molecular weight/high-charge density polymer samples produced very stable complexes. The fully charged polyDMAEMA displayed the strongest binding with the ON. These complexes were therefore less sensitive to the changes in the environment. PolyDMAEMA–DMSQ samples had slightly higher complexation ability than polyDMAEMA–MCQ (DMSQ: dimethylsulfate quat; MCQ: methylchloride quat). Both poly(DMAEMA-b-HEMA) and poly(DMAEMA–MCQ-b-PEG) block copolymers showed good complexation ability and steric stability [HEMA: 2-hydroxyethyl methacrylate; PEG: poly(ethylene glycol)]. PEG, but not HEMA block, enhanced the effectiveness of polyDMAEMA–MCQ binding with the ON.     

Nanostructure evolution studies of bulk polymer materials with synchrotron radiation: progress in method development

The prospects of a modern analysis of nanostructure evolution during the processing of polymer materials by means of scattering from synchrotron radiation are demonstrated in examples. The beam sources have gained stability, shortages are located in beamline setups and in method development for the quantitative analysis of voluminous data sets.By using the proposed multidimensional chord distribution function (CDF) analysis method, nanostructure information from small-angle X-ray scattering (SAXS) data are extracted and visualised. The method can be automated if the beamline setup is able to deliver a full data set with simple constraints. In this case even a simultaneous data evaluation is possible (while one pattern is accumulated, the previous one is analysed). The advantages of the method are demonstrated in a study of the straining of a thermoplastic elastomer. The possibilities of an automated analysis are demonstrated in an investigation of the crystallisation behaviour of high-pressure injection-moulded polyethylene (HPIM-PE). The achievable results of nanostructure analysis of polymer materials are discussed. It is shown that the time-resolved SAXS of polymer materials studied during a transformation and analysed by the CDF method is not just a powerful tool to investigate the relationship between structure and properties of materials; the information that can be gained concerning the processes that control nanostructure evolution is equally important. In the future the enlightenment of such relationships may help to tailor polymer materials with respect to their properties and, beyond that, to improve assessments concerning their aging.     

On-line analysis of polymer melt processes

Molten polymer process streams are difficult to analyze either in- or on-line because of sampling problems due to the high temperature and viscosity of the molten state. Real-time monitoring of chemical compositions in these processes can significantly improve safety and product quality and minimize process costs and waste. The information content of the mid-infrared spectrum combined with the recent development of rugged process Fourier transform (FT) IR spectrometers is stimulating the application of process FT-IR to industrial polymer melt processes. Sampling considerations for polymer melts are reviewed. Also, the use of FT-IR spectrometry for on-line measurements of the polymer composition for polymer blends and copolymers in the melt, and the question of how this information could be used to monitor and control the quality of the product given by the process are discussed.     

The spatial distribution of poly(methyloctylsiloxane) deposited by solvent evaporation in the pores of HPLC silica particles

Summary Poly(methyloctylsiloxane) (PMOS), sorbed into the pores of HPLC silica particles by solvent evaporation, can function as a useful stationary phase for reversed-phase chromatography. The present work addresses the question of how the PMOS is distributed in the pores. Measurements of the surface area (BET, N₂) of a series of partially loaded samples (0–40% PMOS, m/m) using a typical batch of HPLC silica (10 μm irregular particles with 6 nm pores) show that the specific surface area of the samples decreases linearly with the specific loading (mass of PMOS per gram of silica). This result is not consistent with a “film” model in which the PMOS is deposited uniformly on the pore walls, but is consistent with a model in which long segmented “plugs” of PMOS are deposited within the pore system. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

The use of ATR-IR to identify the components separated by paper chromatography

Summary A modified procedure for the identification of separated components in paper chromatography using attenuated total reflection infrared spectroscopy is described. This combined method, though inferior in sensitivity and resolution to the modern separation systems interfaced with sophisticated analytical instruments, is simple, relatively less expensive and suitable for routine analysis of components like polymer additives.     

Zr（Ⅳ）／PVA功能膜的膜催化酯化反应研究

在催化与渗透汽化分离技术相偶合的渗透汽化型膜反应器中，研究了羧酸酯的液相合成反应．实验中制备了两类具有强酸催化活性的ｚｒ（Ⅳ）／ＰＶＡ（聚乙烯醇）功能膜，采用管式膜方式，以乙酸正丁酯的合成反应为探针，对这类新型的催化反应技术在催化活性、分离性能以及分离对反应转化的影响等方面进行了探索性研究。从得到的结果看，膜催化酯化反应过程的反应条件和缓，转化率可达到９８％，反应的选择性为１００％．     

Plastic deformation and performance of engineering polymer materials

The plastic deformation mechanism operating in polymer glasses is analyzed. The whole process consists of two main stages: nucleation of special shear defects, called PSTs (plastic shear transformations), and their disappearance. The important feature of plastic deformation of glasses is the storage of a large amount of internal energy ΔU_def upon straining. Such energy storage is the critical issue for mechanical performance of polymeric material: if the amount of stored energy is high, the appearance of macroscopic failure is very probable while glassy materials collecting a small amount of stored deformation energy are quite ductile. It is proposed that the rate of disappearance of PSTs is a key factor in dissipation of stored deformation energy. A parameter describing the dissipation ability of material upon deformation is introduced.     

Characterization of n-butyl acrylate centered triads in poly(n-butyl acrylate-co-carbon monoxide-co-ethylene) by isotopic labeling and two dimensional NMR

Poly(n-butylacrylate-co-carbon monoxide-co-ethylene) (polyEBC) samples prepared from 13C-labeled monomer, n-butyl acrylate, were characterized using two dimensional (2D) pulsed field gradient (PFG) 750 MHz NMR spectroscopy. To elucidate the complex structure of the terpolymer, 2D-1H/13C-heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) experiments were conducted by selectively exciting the enhanced resonances in the spectra of two polymer samples, one polymer resulting from synthesis with 1-13C-n-butylacrylate monomer and a second polymer obtained from a synthesis with 2-13C-n-butylacrylate monomer. High-resolution 2D-NMR combined with 13C-labeling of the polymer greatly simplifies the 2D-NMR spectra, selectively enhances the weak peaks from low occurrence B-centered triad structures, and aids in their resonance assignments. In all experiments, the sample temperature was 120 degrees C, to ensure a homogeneous solution and sufficient molecular mobility. Electronic Supplementary Material: Supplementary material (1D 13C NMR spectra of the 13C-labeled and unlabeled polymers) is available in the online version of this article at http://dx.doi.org/100.1007/s00216-003-2402-3.