Electro-optic measurement system with high spatial resolution utilizing poled polymer film as external probe tip

A new external electro-optic probing technology has been first demonstrated using a poling electro-optic (EO) polymer film, spin-coated on 20 nm thick grounding perspective aluminum layer which sputtered on a piece of ITO glass as a probe tip, the aluminum layer which has 30% reflectance ratio is also a reference coating. A interdigital electrode was measured, and the spatial resolution of less than was obtained. Voltage sensitivity was approximately . The probing beam reflected from the metal line is phase-modulated by the signal electric field in the EO polymer film, and then converted to amplitude modulation by interference with the reference beam reflected from the 30% reflective coating. The reference electrode makes sure that the most signal voltage drops down in the EO polymer film.     

Morphology and Mechanical Properties of Polyamide 6/Acrylonitrile-Butadiene-Styrene Blends Containing Carbon Nanotubes

The blends of polyamide 6/acrylonitrile-butadiene-styrene (PA6/ABS), with added styrene-maleic acid copolymer (SMA) compatibilizer, were prepared through melt mixing in an internal mixer. The effects of blend composition and various process conditions, as well as the addition of multi-wall carbon nanotubes (MWCNTs) to the blends, on the morphology and mechanical properties were investigated. The morphology of the blends and blend nanocomposites were observed by scanning electron microscopy (SEM) and analyzed using an image analysis technique. The mechanical behavior of the blends was investigated by tensile and also impact testing. The results showed that the blend composition as well as the processing conditions significantly affected the morphology and mechanical properties of the PA6/ABS blends. Among the various compositions, the blend with 36?wt.% of ABS and 4?wt.% of SMA compatibilizer exhibited the best mechanical properties. Comparing various speeds and times of mixing, it was found that less mixing speed and longer mixing times resulted in the favorable morphology and conditions for achievement of the desired toughness for the polyamide 6. By adding different amounts of MWCNTs to the blends, it was found that the presence of the carbon nanotubes changed the viscosity of the resulting nanocomposite and thus changed the morphology. These nanocomposites also showed an improvement in mechanical properties. The MWCNTs acted as a second compatibilizer, resulting in a synergistic effect on the mechanical properties of the PA6/ABS blend nanocomposites.     

Anchoring of Fluorophores to Plasma-chemically Modified Polymer Surfaces and the Effect of Cucurbit[6]uril on Dye Emission

Polypropylene supports were functionalized by plasma-deposition of polymeric allylamine layers. The surface amino groups generated were wet-chemically reacted with xanthene dyes resulting in fluorescent polymer films. The effect of polymer-attachment of the dyes on their emission features was studied fluorometrically and different methods were tested to improve the fluorescence properties of the films. Modification with cucurbit[6]uril (CB6) yields a moderately enhanced fluorescence as well as an improved photostability. The observed effect is most likely due to CB6-induced rigidization of the linker molecules which seems to reduce fluorescence quenching dye–dye and fluorophore–surface interactions.     

活性层厚度对体异质结聚合物太阳能电池性能的影响

制备了MEH-PPV(poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene])和PCBM (1-(3-mehyloxycarbonyl)propy1-phenyl[6,6]C₆₁)共混体系的聚合物太阳能电池。通过改变MEH-PPV∶PCBM(质量比为1∶4)混合溶液的浓度及旋涂时的转速来改变活性层的厚度,研究了器件性能随活性层厚度的变化。当旋涂速率小于4 000 r·min-1时随着厚度的减小,开路电压没有明显的变化,基本在0.8 V左右,但短路电流呈现单调上升的趋势,填充因子略有下降。当旋涂速率大于5 000 r·min-1时,开路电压和短路电流都开始下降。其中,开路电压从5 000 r·min-1时的0.78 V下降到8 000 r·min-1时的0.67 V,短路电流更是从5 000 r·min-1时的3.96 mA·cm-2下降到8 000 r·min-1 时的1.76 mA·cm-2。短路电流受光吸收和载流子传输两方面的共同影响,而活性层厚度的变化使得这两方面的影响产生相悖的效果。活性层越厚,光生激子数越多,但同时内建电场变弱,而且激子解离后得到的载流子传输到相应电极的距离越长,载流子被电极收集的概率减小。开路电压的降低则源于激子在MEH-PPV和PCBM与相应电极界面处解离比重的增加。     

Fabrication and characterizations of a polymer hybrid OA/MA/St-TiO2

A nano-hybrid composite of octadecyl acrylate/maleic anhydride/styrene (OA/MA/St) encapsulating nano-TiO₂ with an average particle size of 30-60 nm was fabricated based on chemical modification of nanotitania. The polymer hybrid OA/MA/St-TiO₂ and nano-TiO₂ were characterized by infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), static contact angle (CA) as well as transmission electron microscopy (TEM). FT-IR spectra and TGA results suggest that the copolymer OA/MA/St adheres on the surface of nano-TiO₂ through physical adsorption and chemical bonding. The calculated reacted OH surface density is about 0.6 OH/nm², and the modification efficiency is approximately 27.28%. In addition, when the molar ratio of OA/MA/St is 7:2:1, the hybrid shows the strongest hydrophobicity, and its static contact angle reaches as high as 146°. TEM image of the hybrid OA/MA/St-TiO₂ reveals that the modified particles have good dispersibility and compatibility with n-hexane.     

Effect of storage time on the properties of PVA–KOH alkaline solid polymer electrolyte system

Polyvinyl alcohol (PVA) and potassium hydroxide (KOH) have been used to prepare alkaline solid polymer electrolytes (ASPE) films. The films were stored in a dry environment for 30 and 100 days. The highest room temperature conductivity for the PVA:KOH film with weight percentage ratio of 1:0.67 during storage for 30 and 100 days were (8.5±0.2)×10⁻⁴ and (1.3±0.1)×10⁻⁷ S cm⁻¹, respectively. The conductivity–temperature behaviour after 30 and 100 days of storage of the alkaline polymer electrolytes is Arrhenian and liquid-like. The structural, morphological and thermal studies of the ASPE films are also presented in this paper.     

Synthesis and luminescent properties of PEO/lanthanide oxide nanoparticle hybrid films

In this study, we investigate the optical properties of lanthanide oxide nanoparticles dispersed in poly(ethylene oxide) (PEO) network as thermally stable polymeric films. The aim of this work is both to keep a good optical transparency in the visible domain and to obtain luminescent materials after incorporation of nanoparticles. For this purpose, we develop luminescent nanocrystals of oxides containing terbium ion as a doping element in Gd₂O₃. These sub-5-nm lanthanide oxides nanoparticles have been prepared by direct oxide precipitation in high-boiling polyalcohol solutions and characterized by luminescence spectroscopy. PEO/lanthanide oxide nanohybrid films are prepared by radical polymerization of poly(ethylene glycol) methacrylate after introduction of lanthanide oxide particles.As a first result; the obtained films present interesting luminescence properties with a very low lanthanide oxide content (up to 0.29 wt%). Furthermore, these films are still transparent and keep their original mechanical properties.Prior to describe the specific applications to optical use, we report here the dynamic mechanical analysis (DMA), X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM), and luminescent properties of. nanohybrid films.     

A 1 × 4 polarization and wavelength independent optical power splitter based on a novel wide-angle low-loss Y-junction

A 1 × 4 polarization and wavelength independent optical power splitter is reported. This device is based on a novel wide-angle low-loss Y-junction structure which can give a theoretical TE junction excess loss of 0.26 dB at a branching angle of 16°. To the best of our knowledge, it is so far the lowest reported loss at such a large angle. The detailed design of the device and its fabrication are described. Our experimental results show the measured TE excess loss to be 1.2 dB and TM excess loss 1.8 dB for the whole splitter over the wavelength between 1.47 μm and 1.57 μm.     

电极修饰层PEO/LiF对聚合物发光二极管发光性能的提高

在以聚合物发光材料poly(2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylene vinylene)(MEH-PPV)为发光层的聚合物发光二极管(PLEDs)的金属阴极与聚合物发光层之间插入一层绝缘的聚合物poly(ethylene oxide)(PEO),发光器件的发光性能有所提高,尤其是PEO/LiF共同对Al电极修饰时发光器件的开启电压、发光强度、电流效率等性能显著提高。初步分析表明修饰层的插入造成了发光聚合物层与金属电极界面形成势垒,通过空穴堆积抑制空穴的注入,增加电子的注入,并且PEO层可以有效抑制激子在阴极的猝灭。     

Effects of ultrasonic vibration on the micro-molding processing of polylactide

A new ultrasonic micro-molding system was used to process polylactide (PLA) and fabricate reduced dimension specimens. Plasticization and molding of PLA were achieved by applying ultrasonic waves after feeding the polymer into a plasticizing chamber. Chemical and physical characteristics of processed PLA varied depending on the processing window (i.e. changes in ultrasonic wave amplitude between 14.2 and 48.1 μm and molding pressure between 0.5 in 6 bars). In terms of chemical effects, the application of ultrasound can lead to lower molecular weights (e.g. decreases of more than 45% in the weight average molecular weight), revealing partial degradation of the material. Also, the processed materials exhibited slightly higher thermal degradability than pure PLA because ultrasonic vibrations break molecular linkages and worsen the polymer structure. Finally, the processing conditions for the preparation of PLA specimens could be optimized without causing degradation and preserving structural characteristics and mechanical properties. Specifically, the use of an amplitude of 48.1 μm and a pressure of 3 bars gave samples with the same molecular weight as the raw material (i.e. 117,500 g/mol as opposed to 117,300 g/mol for M_w).