The theoretical study of the efficiency of diffusion deposition of nanoaerosols in the extended range of the Peclet numbers

The efficiencies of the diffusion deposition of nanoaerosols for a single fiber for the models of aerosol filter and wire mesh screen are studied numerically in the extended range of the Peclet number Pe. The rectangular periodic cell model for fluid flow and convective-diffusive transport of small aerosol particles is used. Most of the previous theoretical and experimental studies of single fiber diffusion deposition efficiency were for the case of Pe > 1. The array with uniform square or chess grid of fibers and of a row of circular cylindrical fibers are considered as the filter and wire mesh screen models. The flow and particles transport equations are solved numerically using the Boundary Element Method.The obtained numerical data are used to derive the approximate formulas for the deposition efficiency in the entire range of the Peclet number for the various porosities of the filter medium or distances between fibers in a wire mesh screen. The derived dependencies take into account nonlinearity of the deposition efficiency at the low Peclet numbers. The obtained analytical dependencies compare well with the numerical and experimental data.     

10瓦级双包层光纤激光器

考虑到所用大功率激光二极管的光谱特性，对光纤激光器的基本法布里-珀罗腔型稍加改变，研制出激光二极管抽运的10w级双包层光纤激光器，获得最高功率为11．8w、波长1100mm的单模激光输出。     

掺Er光纤飞秒激光器载波包络位相偏移的探测

本文介绍了基于掺Er光纤飞秒激光器光学频率梳中光学部分的研制. 实验上采用重复频率为230 MHz的掺Er光纤飞秒激光器,通过放大、光谱展宽以及单臂f—2f系统,在优化及分析相关参数影响的基础上,获得了~30 dB信噪比f₀的输出,为光纤光学频率梳的建立奠定了基础. 关键词： 掺Er光纤激光器 光学频率计量 光纤光学频率梳 光谱展宽     

高精度动态光纤应变传感研究

传统的光纤应变传感技术无法在满足高精度和强环境适应性的同时实现稳定的动态应变传感.为了解决该问题,本文将光干涉原理应用于光纤应变传感,设计了一种强环境适应性的基于干涉结构的高精度光纤应变传感系统,基于扫频干涉信号的互相关系数,该系统可以稳定地探测应变.本文还提出一种动态探测算法,该算法弥补了系统只能探测较小应变的缺陷,大大提升了实际应变的探测范围,同时还实现了动态的应变检测;采用三次样条插值算法,提升了小应变探测的精度.理论分析和仿真模拟表明,在加入白噪声的信号信噪比为15dB时,插值后的探测精度是未插值探测精度的2.3倍,插值后本系统探测结果的最大误差只有约9nε.     

Ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber

An ultra-broadband polarization splitter based on graphene layer-filled dual-core photonic crystal fiber(GDC-PCF)that can work in a wavelength range from 1120 nm to 1730 nm is proposed in this paper. Through optimizing fiber configuration, the polarization splitter has an extinction ratio of-56.3 dB at 1.55 μm with a fiber length of 4.8 mm.Compared with the photonic crystal fiber reported splitters, to our knowledge, the GDC-PCF splitter with the extinction ratio below-20 dB has a super wide bandwidth of 610 nm. Due to the excellent splitting characteristics, the GDC-PCF will be used in coherent optical communication systems in a wavelength range from infrared to mid-infraed.     

High gain L-band erbium-doped fiber amplifier with two-stage double-pass configuration

An experiment on gain enhancement in the long wavelength band erbium-doped fiber amplifier (L-band EDFA) is demonstrated using dual forward pumping scheme in double-pass system. Compared to a single-stage single-pass scheme, the small signal gain for 1580 nm signal can be improved by 13.5 dB. However, a noise figure penalty of 2.9 dB was obtained due to the backward C-band ASE from second stage and the already amplified signal from the first pass that extracting energy from the forward C-band ASE. The maximum gain improvement of 13.7 dB was obtained at a signal wavelength of 1588 nm while signal and total pump powers were fixed at -30 dBm and 92 mW, respectively.     

Optical Single-Sideband Modulators and Their Applications

We review our recent work in the implementation of optical single-sideband (OSSB) modulation and in the application of this modulation format to microwave photonics and optical testing systems. We have developed an enhanced OSSB modulator for wide-band operation, the so-called bidirectional OSSB modulator, and a simplification of this scheme for narrow-band applications. These OSSB modulators are based on the use of a standard single-electrode Mach-Zehnder electro-optic modulator (MZ-EOM) and passive fiber-optic components. In both designs, the OSSB operation is shown to be independent of the MZ-EOM bias. Therefore, the optical modulation depth at the output of the device can be enhanced using minimum transmission biasing to provide suppression of the optical carrier. Finally, we demonstrate the application of OSSB modulators to the improvement of microwave/millimeter-wave subcarrier multiplexing fiber-optic links and to narrow-band fiber radio systems. In addition, we analyzed the feasibility and the limitations of an optical vector network analysis technique based on OSSB modulation that can provide sub-picometer wavelength resolution.     

Lamination Design Optimization for Continuous Fiber Reinforced Composites of Variable Thicknesses北大核心CSCD

由于具备高的比强度、比刚度,利用连续纤维增强复合材料代替传统金属材料以实现结构轻量化正受到设计者们的广泛关注。然而,结构的复杂性给复合材料的铺层设计与优化带来了很大的挑战。针对航空用复合材料铺层设计约束多的问题,通过逐步构建设计变量准确表达结构的铺层信息。基于经典遗传算法框架,结合各设计变量特点,定义了铺层优化算法中的遗传算子,通过引入“修复”策略保证了每一代解都能满足设计约束,分布在可行域区间内。最后利用精英保留策略提高了算法的局部寻优能力,可以降低复杂复合材料结构铺层设计的计算成本。通过解决经典benchmark问题并与已有优化结果的比较,验证了前述铺层优化算法的全局、局部寻优能力,为工程实际中的复合材料铺层设计优化提供了理论支撑。     

Titania-Doped Silica Fibers Prepared by Electrospinning and Sol-Gel Process

Titania-doped silica fibers were prepared by electrospinning of the sol of silica containing titania. The electrospun fibers had ribbon type morphology. The fibers had significant quantities of hydroxyl groups of Si—OH and Ti—OH. The fibers did not have crystalline structure. Diameters of the fibers were reduced by solvent evaporation and calcination. The hydroxyl groups on the fibers disappeared by calcination. The hydroxyl groups, M—OH (MSi, Ti) were changed to M—O—M by intermolecular and intramolecular condensation reactions.     

1.55-μm non-anti-reflection-coated fiber grating laser for single-longitudinal mode operation

A 1.55-m fiber grating laser (FGL) was fabricated by optically packaging a non-anti-reflection (AR) coated Fabry–Perot (FP) laser to a lensed fiber grating. The FGL demonstrates a single-longitudinal mode operation with a side-mode suppression ratio (SMSR) of up to 40 dB. The SMSR oscillates and diminishes to <30 dB as the increase of injection current above 38 mA, and the tilt of the fiber approaches 5° away from the facet normal of the FP laser. We have performed numerical simulations on the single-longitudinal mode operation for the FGL. The SMSR for the FGL increases over 40 dB as the increase of the fiber grating reflectivity (R _g) above 0.7 with non-AR-coated FP laser facet. Our calculations also show that the strong current-dependent SMSR oscillation is from the mode selection by the fiber grating external cavity and the heating effect in the FP laser.