Synthesis of ethylene/vinyl ester copolymers with pendent linear branches via ring‐opening metathesis polymerization of fatty acid‐derived cyclooctenes

Fatty acid‐derived cyclooctenes, including n‐hexanoic acid ( M1 ), n‐octanoic acid ( M2 ), lauric acid ( M3 ), and palmitic acid ( M4 ), were prepared as monomers and polymerized by ring‐opening metathesis polymerization (ROMP) using Grubbs second‐generation catalyst ( G2 ). In all the cases, the regio‐irregular unsaturated polymers with pendent linear branches were obtained, which could be saturated by chemical hydrogenation with TSH/TPA in high conversion, yielding ethylene/vinyl ester copolymers with pendent linear branches on precisely every eighth backbone carbon. Both unsaturated and saturated polymers were amorphous, and their structures were characterized by FTIR, ¹H and ¹³C NMR spectra, and elemental analysis. Differential scanning calorimetry (DSC) and thermo‐gravimetric analysis (TGA) were used to study their thermal properties. The chain length of branches greatly affected the thermal properties of polymers. After hydrogenation, the thermal degradation stability of polymers was relatively improved. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2211–2220     

基于聚丙交酯的光固化型可生物降解聚氨酯丙烯酸酯的合成和表征

基于聚醚酯的聚氨酯丙烯酸酯具有应用于组织工程支架材料及相关生物医用材料的潜力,研究其可生物降解性及影响因素非常重要.聚醚酯是由PEG(Mw=400)引发L-丙交酯开环聚合而得到的PLLA-PEGPLLA(PLEL)嵌段共聚物.它与二异氰酸酯(异佛尔酮二异氰酸酯和六亚甲基二异氰酸酯)反应,并用甲基丙烯酸羟乙酯封端,得到聚氨酯丙烯酸酯低聚物,然后通过紫外固化得到聚氨酯丙烯酸酯材料(PUA).用NMR和GPC对PLEL二醇和预聚物进行了组成和分子量表征,用DSC和DMA对PUA进行了结构和物理性能表征以及用接触角、吸水率和质量分析方法对材料的亲水性和降解性能进行了表征.结果发现,随着PLLA疏水链段变长,PLEL软段分子量增大,材料的亲水性降低,交联度和降解速率变小.相同的软段,基于硬段HDIHEMA的PUA材料比IPDI-HEMA的PUA有较低的T_g,较高的亲水性和降解速率.因为IPDI有环状结构,降低了PUA与水的相互作用.在3种不同降解条件下,氧化降解速率最高,酶解的速率高于水解.PUA材料的氧化降解速率取决于软段中PEG的含量,PLEL1000-HDI中PEG含量最高,其氧化降解最快,13周内失重率达到82.6%.     

A Simple Synthesis of Stable Phosphoranes Derived from Imidazole Derivatives

Stable crystalline phosphorus ylides were obtained in excellent yields from the 1:1:1 addition reaction between triphenylphosphine and dialkyl acetylenedicarboxylates, in the presence of strong NH-acids, such as imidazole, 2-methylimidazole, 4-methylimidazole, 2-ethylimidazole, benzimidazole, and 5,6-dimethylbezimidazole. These stable ylides exist in solution as a mixture of two geometrical isomers as a result of restricted rotation around the carbon–carbon partial double bond resulting from the conjugation of the ylide moiety with the adjacent carbonyl group.     

A Simple Synthesis of Stable Phosphorus Ylides from Indole and Some of Its Derivatives

Stable crystalline phosphorus ylides were obtained in excellent yields from the 1:1:1 addition reaction between triphenylphosphine and dialkyl acetylenedicarboxylates in the presence of strong NH acids, such as indole and 2-methyl indole, 3-methyl indole, and 5-boromo indole. These stable ylides exist in a solution as a mixture of two geometrical isomers as a result of the restricted rotation around the carbon–carbon partial double bond resulting from the conjugation of the ylide moiety with the adjacent carbonyl group.     

Oxidation of Poly(dimethylbutadiene) Popcorn Polymer

Poly(dimethylbutadiene) popcorn polymer oxidizes readily in the presence of oxygen at room temperature. Quantitative data are presented for the production of the major volatile product, 2,5-hexanedione, as well as for the secondary products: water, acetic acid, and acetaldehyde. Three reaction mechanisms formerly proposed for polyisoprene oxidation are considered for their applicability to poly(dimethylbutadiene) popcorn oxidation. Of these, one that assumes the formation of a Bevilacquatype peroxyalkoxy radical followed by hydrogen abstraction to form an alcohol group, double bond migration, formation of a peroxide radical adjacent to the alcohol, then elimination of a hydroxy radical and scission, can explain the experimental data.     

Nitroxide‐Mediated Polymerization of Bio‐Based Farnesene with a Functionalized Methacrylate

Farnesene (Far) is a bio‐based terpene monomer that is similar in structure to commercially used dienes like butadiene and isoprene. Nitroxide‐mediated polymerization (NMP) is adept for the polymerization of dienes, but not particularly effective at controlling the polymerization of methacrylates using commercial nitroxides. In this study, Far is statistically copolymerized with a functional methacrylate, glycidyl methacrylate (GMA), by NMP using N‐succinimidyl modified commercial BlocBuilder (NHS‐BB) initiator. Reactivity ratios are determined to be r _Far = 0.54 ± 0.04 and r _GMA = 0.24 ± 0.02. The ability of the poly(Far‐stat‐GMA) chains to reinitiate for chain extension with styrene showed a clear shift in molecular weight and monomodal distribution. Copolymerizations using a new alkoxyamine, Dispolreg 007 (D7), is explored as it is shown to homopolymerize methacrylates, but not yet reported for statistical copolymerizations. Bimodal molecular weight distributions are observed when an equimolar ratio of Far and GMA is copolymerized with D7 due to slow decomposition of the initiator, but chain ends are active as shown by successful chain extension with styrene. Both NHS‐BB and D7 initiators are used to synthesize poly[Far‐b‐(GMA‐stat‐Far)] and poly(Far‐b‐GMA) diblock copolymers. While the NHS‐BB initiated polymer chains have lower dispersity, D7 exhibits more linear polymerization kinetics and maintains more active chain ends.     

Ecofriendly synthesis and biological evaluation of 4-(4-nitro-phenyl)-2-phenyl-1,4-dihydro-benzo[4,5]imidazo[1,2-a]pyrimidine-3-carboxylic acid ethyl ester derivatives as an antitubercular agents

An ecofriendly route has been investigated for the synthesis of 4-(4-nitro-phenyl)-2-phenyl-1,4-dihydro-benzo[4,5]imidazo[1,2-a]pyrimidine-3-carboxylic acid ethyl ester derivatives by one-pot, three-component condensation of ethyl benzoylacetate, aromatic aldehydes, and 2-amino benzimidazole using 260?mol% of citric acid as reaction mediator. Citric acid is an inexpensive, nontoxic, and green medium with smoothly activates the rate of reaction. The synthesized compounds were assessed for in vitro antimycobacterial activity against Mycobacterium tuberculosis H₃₇RV strain using the microplate alamar blue assay (MABA). The results indicate that among all the synthesized compound series, P-4 and P-9 compounds illustrate effective activity with a minimum inhibitory concentration of 25?µg/ml.     

Construction of Charring-Functional Polyheptanazine towards Improvements in Flame Retardants of Polyurethane

Nitrogen-containing flame retardants have been extensively applied due to their low toxicity and smoke-suppression properties; however, their poor charring ability restricts their applications. Herein, a representative nitrogen-containing flame retardant, polyheptanazine, was investigated. Two novel, cost-effective phosphorus-doped polyheptazine (PCN) and cobalt-anchored PCN (Co@PCN) flame retardants were synthesized via a thermal condensation method. The X-ray photoelectron spectroscopy (XPS) results indicated effective doping of P into triazine. Then, flame-retardant particles were introduced into thermoplastic polyurethane (TPU) using a melt-blending approach. The introduction of 3 wt% PCN and Co@PCN could remarkably suppress peak heat release rate (pHRR) (48.5% and 40.0%), peak smoke production rate (pSPR) (25.5% and 21.8%), and increasing residues (10.18 wt%→17.04 wt% and 14.08 wt%). Improvements in charring stability and flame retardancy were ascribed to the formation of P–N bonds and P=N bonds in triazine rings, which promoted the retention of P in the condensed phase, which produced additional high-quality residues.     

Synergistic effect of thermoplastic phenolic resin and multiwalled carbon nanotubes on the crystallization of polyoxymethylene

To reduce the crystallization rate of polyoxymethylene (POM) to meet the requirement of thick-walled and large-sized articles production, and maintain high crystallinity as well as obtain refined crystalline grains to ensure the strength and stiffness simultaneously, thermoplastic phenolic resin (PF) and multiwalled carbon nanotubes (MWCNTs) were used as crystal growth inhibitor and nucleating agent, respectively, and their effects on the crystallization of POM were studied in details. The results showed that PF is an effective inhibitor and MWCNTs exhibits excellent nucleation effect on POM. Based on the obtained results, their synergistic influences on the crystallization process of POM were investigated. It is found that the objective of decreasing the crystallization rate while maintaining high crystallinity and forming fine crystalline grains can be realized. The 97/3/1 wt% POM/PF/MWCNTs, compared with those of neat POM, The T _c shifts by 3.3°C to a lower temperature, the crystallization enthalpy increases by 16.1 J/g and the full width at half-maximum widens by 48.5%. The modulation effect of PF and MWCNTs on the crystallization is closely related to the PF content and dispersion, the distribution and dispersion of MWCNTs in the PF and POM phases.     

Facile amidation of esters with aromatic amines promoted by lanthanide tris (amide) complexes

The development of catalysts capable of catalyzing amidation of esters with amines to construct amides under mild conditions is of great importance. Compared to aliphatic amines, the direct catalytic amidation of esters with less nucleophilic aromatic amines is rather difficult. Employing simple lanthanide tris (amide) complexes Ln[N (SiMe₃)₂]₃(μ-Cl)Li (THF)₃ as the catalysts, it was found a broad range of aromatic amines and esters were efficiently converted into various amides in good yields under mild conditions. A plausible mechanism for this transformation was experimentally supported as starting from an amide exchange reaction between the lanthanide tris (amide) complex and the substrate amine.