Highlighting the possible secondary interactions in the role of balhimycin and its analogues for enantiorecognition in capillary electrophoresis

It is believed that the enantiorecognition mechanism based on macrocyclic antibiotics involves multimodal interactions via hydrogen bonding, π–π interaction, steric hindrance, hydrophobic interaction and so on. A variety of enantiomeric N-benzoylated amino acids were separated using balhimycin (A) or its analogues bromobalhimycin (B) and dechlorobalhimycin (C) as chiral mobile phase additive using a CE method, which combined the partial filling technique with the dynamic coating technique and the co-EOF electrophoresis technique. The enantioresolution and the migration time were highly relevant to the structure of analytes, especially to the substitutions on the N-tagged benzoyl moiety of the amino acids. A steric effect and π–π interaction based mechanism is proposed in order to explain some observed enantioresolution differences between positional isomers. Notably dechlorobalhimycin exhibited the best enantioresolution for several N-benzoylated derivatives of leucine, which was rarely observed for N-dansylated amino acid derivatives. The hydrophobicity difference of the aglycone pocket among three chiral selectors was assumed to account for this behaviour.     

Mannose‐Binding Geometry of Pradimicin A

Pradimicins (PRMs) and benanomicins are the only family of non‐peptidic natural products with lectin‐like properties, that is, they recognize D ‐mannopyranoside (Man) in the presence of Ca²⁺ ions. Coupled with their unique Man binding ability, they exhibit antifungal and anti‐HIV activities through binding to Man‐containing glycans of pathogens. Notwithstanding the great potential of PRMs as the lectin mimics and therapeutic leads, their molecular basis of Man recognition has yet to be established. Their aggregate‐forming propensity has impeded conventional interaction analysis in solution, and the analytical difficulty is exacerbated by the existence of two Man binding sites in PRMs. In this work, we investigated the geometry of the primary Man binding of PRM‐A, an original member of PRMs, by the recently developed analytical strategy using the solid aggregate composed of the 1:1 complex of PRM‐A and Man. Evaluation of intermolecular distances by solid‐state NMR spectroscopy revealed that the C2–C4 region of Man is in close contact with the primary binding site of PRM‐A, while the C1 and C6 positions of Man are relatively distant. The binding geometry was further validated by co‐precipitation experiments using deoxy‐Man derivatives, leading to the proposal that PRM‐A binds not only to terminal Man residues at the non‐reducing end of glycans, but also to internal 6‐substituted Man residues. The present study provides new insights into the molecular basis of Man recognition and glycan specificity of PRM‐A.     

preconcentration and determination of amoxicillin and ceftriaxone in hospital sewage using vortex-assisted liquid-phase microextraction based on the solidification of the deep eutectic solvent followed by HPLC–UV

In the present study, a new method for extraction and preconcentration of amoxicillin and ceftriaxone was used in hospitalised sewage samples, called vortex-assisted liquid-phase microextraction based on the solidification of deep eutectic solvent. Samples were analysed by high-performance liquid chromatography–ultraviolet detection after preparation and extraction. In this method, the new deep eutectic solvent is used as the extraction solvent, which is obtained from the combination of 1-decyl-3-methylimidazolium chloride and n-butanoic acid. The important advantages of this novel extraction solvent include material stability, low density and good freezing point near room temperature. Under the optimum conditions, enrichment factors are in the range of 164–172. Repeatability and reproducibility of the method based on seven replicate measurements of 50.0 µg L^?1 of the target analytes in analysed samples were in the range of 2.1–3.5% and 3.8–5.2%, respectively. The limit of detections and linearity are in the range of 0.005–0.10 and 3–600 µg L^?1, respectively. The method was successfully applied for the determination of amoxicillin and ceftriaxone in the real sewage samples. The relative recoveries of sewage samples spiked with amoxicillin and ceftriaxone are 91–107%.     

Elucidation of the Active Conformation of Vancomycin Dimers with Antibacterial Activity against Vancomycin‐Resistant Bacteria

Covalently linked vancomycin dimers have attracted a great deal of attention among researchers because of their enhanced antibacterial activity against vancomycin‐resistant strains. However, the lack of a clear insight into the mechanisms of action of these dimers hampers rational optimization of their antibacterial potency. Here, we describe the synthesis and antibacterial activity of novel vancomycin dimers with a constrained molecular conformation achieved by two tethers between vancomycin units. Conformational restriction is a useful strategy for studying the relationship between the molecular topology and biological activity of compounds. In this study, two vancomycin units were linked at three distinct positions of the glycopeptide (vancosamine residue (V), C terminus (C), and N terminus (N)) to form two types of novel vancomycin cyclic dimers. Active NC‐VV‐linked dimers with a stable conformation as indicated by molecular mechanics calculations selectively suppressed the peptidoglycan polymerization reaction of vancomycin‐resistant Staphylococcus aureus in vitro. In addition, double‐disk diffusion tests indicated that the antibacterial activity of these dimers against vancomycin‐resistant enterococci might arise from the inhibition of enzymes responsible for peptidoglycan polymerization. These findings provide a new insight into the biological targets of vancomycin dimers and the conformational requirements for efficient antibacterial activity against vancomycin‐resistant strains.     

Amoxicillin removal from aqueous matrices by sorption with almond shell ashes

The adsorption of the antibiotic amoxicillin at low concentration levels (µg?L^?1 order) from aqueous solution on almond shell ashes has been investigated, either by kinetic or equilibrium assays. The effect of the adsorbent amount, initial concentration of the antibiotic, particle diameter (d_p) and temperature were considered to evaluate the adsorption capacity of the adsorbent. The results showed that amoxicillin sorption is dependent on these four factors. The adsorption process was relatively fast and equilibrium was established in about 12 hours. The optimum parameters for an initial concentration of 450?µg?L^?1 were 50?mg of adsorbent, 303?K and d_p?<?600?µm. A comparison of kinetic models showed that pseudo-second order kinetics provides the best correlation of the experimental data. Isotherm data adjusted better to Langmuir equation, with an adsorption capacity of 2.5?±?0.1?mg?g^?1 at 303?K. The desorption process was also evaluated (maximum efficiency of 5%). Thermodynamic parameters were calculated and the negative value of ΔH⁰ and ΔG⁰ showed that adsorption was exothermic and a spontaneous process.     

抗癌药物柔红霉素的光谱电化学研究

采用现场光谱电化学技术,结合循环伏安和红外光谱等手段,研究了柔红霉素的电极过程,并提出了可能的还原机理.结果表明,柔红霉素的还原途径与其浓度存在一定的联系:稀溶液的还原经历一ECE过程--得到两个电子还原为柔红霉氢醌后,发生化学反应脱去7位上的糖基侧链,得到的7-去氧柔红霉醌继续被还原,生成的自由基中间体可发生歧化反应或通过分子间缔合而稳定;当溶液浓度较大时,柔红霉素分子在得到一电子生成半醌自由基中间体后,以其双分子缔合物的形式稳定存在.     

Determination of macrolide antibiotics by liquid chromatography

The liquid chromatographic separation of seven macrolides used in food producing animals in the European Union has been studied. Separation was performed by using an end-capped high-purity silica-based C₁₈ column and mobile phases consisting of phosphate buffer (pH 2.5)–acetonitrile mixtures. The effect of pH and acetonitrile percentage on the separation was examined. Two UV-based detection systems, wavelength programming and diode array, were assayed. Detection limits were in the range 6–33 μg l⁻¹ for spiramycin, tilmicosin, tylosin, kitasamicin and josamicin and about 400 μg l⁻¹ for erythromycin and oleandomycin. The suitability of the method for multiresidue determination of the five macrolides is demonstrated by the analysis of spiked samples of chicken muscle.     

Development and validation of a simple solid‐phase extraction method coupled with liquid chromatography–triple quadrupole tandem mass spectrometry for simultaneous determination of lincomycin,tylosin A and tylosin B in royal jelly

We have developed an analytical method for the determination of lincomycin, tylosin A and tylosin B residues in royal jelly using liquid chromatography–triple quadrupole tandem mass spectrometry analysis. For extraction and purification, we employed 1% trifluoroacetic acid and 0.1 m Na₂EDTA solutions along with an Oasis HLB cartridge. The target antibiotics were well separated in a Kinetex EVO C₁₈ reversed‐phase analytical column using a combination of 0.1% formate acid in ultrapure water (A) and acetonitrile (B) as the mobile phase. Good linearity was achieved over the tested concentration range (5–50 μg/kg) in matrix‐matched standard calibration. The coefficients of determination (R²) were 0.9933, 0.9933 and 0.996, for tylosin A, tylosin B and lincomycin, respectively. Fortified royal jelly spiked with three different concentrations of the tested antibiotics (5, 10 and 20 μg/kg) yielded recoveries in the range 80.94–109.26% with relative standard deviations ≤4%. The proposed method was applied to monitor 11 brand of royal jelly collected from domestic markets and an imported brand from New Zealand; all the samples tested negative for lincomycin, tylosin A and tylosin B residues. In conclusion, 1% trifluoroacetic acid and 0.1 m Na₂EDTA aqueous solvents combined with solid‐phase extraction could effectively complete the sample preparation process for royal jelly before analysis. The developed approach can be applied for a routine analysis of lincomycin, tylosin A and tylosin B residues in royal jelly.     

Aqueous chlorination of sulfamethazine and sulfamethoxypyridazine: Kinetics and transformation products identification

Sulfonamides (SNs) are synthetic antimicrobial agents. These substances are continually introduced into the environment, and they may spread and maintain bacterial resistance in the different compartments. The chlorination of 2 SNs, namely, sulfamethazine (SMT) and sulfamethoxypyridazine (SMP), was investigated to study their reactivity with chlorine at typical concentrations for water treatment conditions. Experiments conducted in purified water show an acceleration of SMT and SMP degradation of a factor 1.5 by comparison to drinking water matrix. This difference is due to pH variation and competitive reactions between SNs and mineral and organic compounds, with chlorine in drinking water. In the presence of an excess of chlorine (6.7 μmol·L⁻¹) in ultrapure water at pH 7.2, second‐order degradation rate constants were equal to 4.5 × 10²M⁻¹·s⁻¹ and 5.2 × 10²M⁻¹·s⁻¹ for SMT and SMP, respectively. The structures of transformation products were investigated by liquid chromatography tandem mass spectrometry analyses with equimolar concentrations between chlorine and SNs. SO₂ elimination, cyclization, and electrophilic substitutions were the main pathways of by‐products formation. Moreover, the toxicity of the proposed structures was predicted by using toxicity estimation software tool program. The results indicated that most by‐products may present developmental toxicity.