New cut angle quartz crystal microbalance with low frequency-temperature coefficients in an aqueous phase

In a traditional quartz crystal microbalance (QCM), an AT-cut (cut angle φ = 35.25° in yxl orientation) quartz wafer is employed because it has low frequency–temperature coefficients (dF/dT) at room temperature region. But when a QCM is in contact with a liquid phase, its frequency is also related to the properties of the liquid, which are temperature dependent. The value of dF/dT is about 20 Hz/°C for a 9 MHz AT-cut QCM with one side facing water. In this work, a group of QCMs in new cut angles were prepared. The influence of the cut angle on the frequency–temperature characteristic, response sensitivities to surface mass loading and viscodensity of liquid were investigated. An intrinsically temperature-compensated QCM sensor that possesses low dF/dT values in aqueous solution was reported. When a 9 MHz QCM with φ = 35.65° was contacted with water with one side, its dF/dT value is close to zero at ca. 25 °C and its averaged value of |dF/dT| is only 0.6 Hz/°C in the temperature range of 23–27 °C. The frequency responses to surface mass loading and viscodensity of liquid phase are very close among the QCMs with the cut angles in the range of 35.15–35.7°. The intrinsically temperature-compensated QCM was applied to investigate the alternate adsorption processes of cationic polyelectrolyte and silica nanoparticle.     

Films based on chitosan polyelectrolyte complexes for skin drug delivery: Development and characterization

Novel chitosan based polyelectrolyte complexes (PEC) were developed and optimized in order to obtain films possessing the optimal functional properties (flexibility, resistance, water vapour transmission rate and bioadhesion) to be applied on skin. The development was based on the combination of chitosan and two polyacrylic acid (PAA) polymers with different crosslinkers and crosslinking densities. The interaction between the polymers was maximized controlling the pH, and by forming the films at a pH value close to the pK_a of the respective components as identified by potentiometric and turbidimetric titrations. The action of glycerol, PEG200, Hydrovance and trehalose upon the functional properties of the films was also evaluated. Glycerol was found to improve the film properties in terms of flexibility, resistance and water vapour transmission rate (WVTR) with a maximum effect at 30%. The application of a pressure sensitive adhesive (PSA) significantly improved bioadhesion with a negligible influence in the resistance and flexibility of the films.The optimized film, including adhesive, has shown very good properties for application in the skin and represents a very promising formulation for further incorporation of drugs for topical and transdermal administration.     

Nanocomposite-based lignocellulosic fibers 1. Thermal stability of modified fibers with clay-polyelectrolyte multilayers

The layer-by-layer (LbL) assembly process of creating highly structured thin films derived from layers of polyelectrolytes and nanoparticles was adopted in this study to modify the surface of lignocellulosic fibers. Aqueous dispersions of clay nanoplatelets were created with ultrasonication and characterized with dynamic light scattering and atomic force microscopy in which confirmed the presence of individual clay nanoplatelets. Film thickness of never-dried clay and poly(diallyldimethylammonium chloride) (PDDA) multilayers was studied with a quartz crystal microbalance with dissipation monitoring (QCM-D). Using identical LbL deposition parameters, a slurry of steam-exploded wood fibers was modified by alternate adsorption of PDDA and clay with multiple rinsing steps after each adsorption cycle. Zeta potential measurements were used to characterize the fiber surface charges after each adsorption step while SEM images revealed that the LbL film masked the cellulose microfibril structure. Using a thermogravimetric analyzer, LbL modified steam-exploded wood fibers were observed to attain increased thermal stability relative to the unmodified material tested in both air and nitrogen atmospheres. Significant char for the LbL clay coated steam-exploded wood suggests the multilayer film serves as a barrier creating an insulating layer to prevent further decomposition of the material. This nanotechnology may have a positive impact on the processing of lignocellulosic fibers in thermoplastic matrices, designing of paper-based overlays for building products, and modification of cellulosic fibers for textiles.     

Carboxyl groups in pre-treated regenerated cellulose fibres

The influence of peroxide bleaching and slack-mercerization on the amount of acidic groups in regenerated fibres (viscose, modal and lyocell) were studied. Conductometric titration was used to determine the total content of acidic carboxylic groups. Polyelectrolyte titration was used for surface and total charge determination, and to obtain information about the charge distribution and accessibilities of charged groups. Changes in fibre crystallinity to pre-treatment processes were characterized using iodine sorption (Schwertassek method) and correlated to treatments and the amount of carboxylic groups. For all three types of fibres the amount of accessible carboxyl groups was lowered by an increase in the degree of crystallinity. Bleaching with hydrogen peroxide causes some oxidative cellulose damage and, therefore, a larger amount of carboxyl groups (presumably formed at the end of cellulose chains). Slack-mercerization did not significantly change the total amount of acidic groups in the fibres, but their accessibility to cationic polyelectrolytes, in particular to polymers with high molecular weight was substantially lowered. Lidija Fras Zemljič, Zdenka Peršin, and Karin Stana Kleinschek are the members of the European Polysaccharide Network of Excellence (EPNOE).     

A mycelium with polyelectrolyte complex-bunched hyphae: preparation and fermentation performance

We studied the immobilization of a mycelium (Aspergillus niger) using the working hypothesis as follows: (a) when polycation was added to the cell suspension, a few parts of it would bind on the surface of a hypha, allowing to gather the hyphae in part but not all; (b) upon further addition of polyanion, such a gathering of the hyphae is tightly bunched by the polyelectrolyte complex (PEC) which is resulted from the remaining polycation; (c) as a result, a mycelium with partially bunched hyphae can be obtained. Potassium poly(vinyl alcohol) sulfate and trimethylammonium glycol chitosan iodide [6-O-(2-hydroxyethyl-2-(trimethylamonio)-chitosan iodide) were used as the polyanion and the polycation, respectively. The optical and electron microscopic analyses showed that our immobilized cell contains many of PEC-bunched hyphae. The sedimentation rate increased with the weight ratio of PEC to dry cells and leveled off at the weight ratio larger than 0.5. The gluconic acid production from glucose was studied by a semi-large scale (1 l) cultivation of the imobilized and free cells using a jar fermentor. It was found that an apparent specific activity of the immobilized cells for glucose oxidation becomes 1.44 times that of the free cells even at a high cell density of 40 g/l.     

Lower critical solution temperature type of phase separation in aqueous mixture of polyelectrolytes

Phase separation behavior in aqueous mixture of different polyelectorolytes having like charges has been investigated as functions of concentration and charge density. When the charge densities of both polyelectorolytes were equally high, the compatibility between different polyelectorolytes was relatively good and the phase separation behavior was a normal upper critical solution temperature (UCST) type. With decreasing the charge density of one polyelectorolyte keeping the charge density of another polyelectrolyte unchanged, the compatibility between different polyelectorolytes became poorer. When the charge density of one polyelectorolyte was lowered below a certain value, the phase separation behavior suddenly changed from the UCST type to a lower critical solution temperature (LCST) type.     

磺甲基酚醛树脂激基缔合物的荧光光谱

本文研究了磺甲基酚醛树脂(SMP)在无盐和外加盐的水溶液中的荧光光谱.证实了生色团在主链上的聚电解质SMP分子间激基缔合物的形成.探讨用SMP分子间激基缔合物荧光作为研究SMP分子形态变化探针的可能性.     

Flocculation of dilute titanium dioxide suspensions by graft cationic polyelectrolytes

The flocculation of a dilute titanium dioxide (TiO₂) suspension using homopolymers and graft copolymers of acrylamide (AM) and diallyldimethylammonium chloride (DADMAC) was investigated. The graft copolymers produced by γ-irradiating the mixtures of polyacrylamide (PAM) and polyDADMAC gave better flocculating performance than homopolymers, reflecting the higher fractions of large particles and bigger floc size. A kinetic delay in the onset of flocculation was observed after adding the copolymers in the dose range 5–30 [mg polymer]/ [g TiO₂]. Increasing dosage resulted in a longer delay period. No significant flocculation was observed when the dose was above 50 [mg polymer]/[g TiO₂]. This delay was interpreted in terms of the re-conformation of polymer chains driven by charge neutralization, between the positively charged polymer branches and the negative particle surface. Depending on the dosage used, the flocculation behavior of the graft copolymer has been suggested to be equilibrium and non-equilibrium flocculation. It was also observed that re-conformation is not affected by the ion strength of the media, but a strong shear force significantly reduces the chain reconformation time. Received: 9 April 1998 Accepted in revised form: 28 August 1998     

强电解质凝胶的溶胀平衡与体积相变

以作者近年来对强电解质凝胶的研究结果为中心,介绍了磺酸基凝胶和丙烯酸基凝胶在纯水,缓冲溶液中溶胀比与电荷密度的关系及其差异,揭示了磺酸基凝胶中的反离子凝聚现象和在有机溶剂中体积相变,还讨论了体积相变的滞后现象及其成因,最后就体积相变的驱动力,统一认识电解质和离聚体以及有关的实验结果阐述了作者的见解。     

SiO2微球表面吸附PDADMAC的研究

The effects of concentration of NaCl and pH values on the adsorption isotherms of poly（diallyldimethylammonium chloride）（ PDADMAC）on SiO2 microspheres and Zeta-potential of adsorbed-silica in different pH buffer have been investigated. The results show that the adsorption of the polyelectrolyte increases with increasing salt concentration and pH values,respectively. It follows the Langmiur isotherm. The isoelectric point of SiO2 microspheres gradually migrates toward the high pH values with increasing the adsorption of PDADMAC. Under alkaline conditions the PDADMAC adsorption on SiO2 microspheres shows good stability of disperse. The X-ray photoelectron spectroscopy（XPS）analysis of the PDADMAC adsorpted SiO2 microspheres sample exhibits the presence of nitrogen-containing intermediates with N1s XPS peaks at the binding energy of 401.7 eV. The O1s spectra show two distinct peaks which are oxygen-containing silica corresponding lower binding energy and adsorping oxygen corresponding higher binding energy,respectively. With the PDADMAC adsorption on SiO2 microspheres the peak of O1s contributed from the part of adsorping oxygen increases.