Molecular modelling of some para-substituted aryl methyl telluride and diaryl telluride antioxidants

Quantum mechanical calculations using the 3-21G(d) basis-set were performed on some p-substituted diaryl tellurides and aryl methyl tellurides, and the corresponding cationic radicals of these compounds. Calculated relative radical stabilization energies (RSE:s) were shown to correlate with experimentally determined peak oxidation potentials (R=0.93) and ¹²⁵Te-NMR chemical shifts (R=0.91). A good correlation was also observed between the RSE:s and the Mulliken charge at the tellurium atoms (R=0.97). The results showed that Hartree–Fock calculations using the 3-21G(d) basis set was sufficiently accurate for estimating the impact of p-substituents in aryl tellurides on experimentally determined properties such as peak oxidation potentials and ¹²⁵Te-NMR chemical shifts.     

Formation of 4-N-Arylamino-1-butanol Derivatives from Aromatic Nitro Compounds via a Novel Palladium-Catalyzed Tetrahydrofuran Ring-Opening Reaction

Abstract

4-N-Arylamino-1-butanol derivatives are produced via a palladium-catalyzed tetrahydrofuran ring-opening reaction. This reaction occurs during the reduction of aromatic nitro groups with polymethylhydrosiloxane (PMHS) and potassium fluoride in the presence of hydrogen peroxide. This represents a novel route for the synthesis of 4-N-arylamino-1-butanols.     

Probing the pyrolysis of methyl formate in the dilute gas phase by synchrotron radiation and theory

The thermal dissociation of the atmospheric constituent methyl formate was probed by coupling pyrolysis with imaging photoelectron photoion coincidence spectroscopy (iPEPICO) using synchrotron VUV radiation at the Swiss Light Source (SLS). iPEPICO allows threshold photoelectron spectra to be obtained for pyrolysis products, distinguishing isomers and separating ionic and neutral dissociation pathways. In this work, the pyrolysis products of dilute methyl formate, CH₃OC(O)H, were elucidated to be CH₃OH + CO, 2 CH₂O and CH₄ + CO₂ as in part distinct from the dissociation of the radical cation (CH₃OH^+• + CO and CH₂OH⁺ + HCO). Density functional theory, CCSD(T), and CBS-QB3 calculations were used to describe the experimentally observed reaction mechanisms, and the thermal decomposition kinetics and the competition between the reaction channels are addressed in a statistical model. One result of the theoretical model is that CH₂O formation was predicted to come directly from methyl formate at temperatures below 1200 K, while above 1800 K, it is formed primarily from the thermal decomposition of methanol.     

Viscoelastic Behavior of Poly(Methyl Methacrylate-Co-Methyl Acrylate) Random Copolymer Studied by Dynamic Mechanical Analysis and Nanoindentation

The viscoelastic behavior of poly(methyl methacrylate) (PMMA) homopolymer and poly(methyl methacrylate-co-methyl acrylate) random copolymers was characterized by dynamic mechanical analysis and nanoindentation. Differential scanning calorimetric results showed only one glass transition, indicating the random distribution of comonomers in the copolymers. The α relaxation temperature (T_α) and activation energy (H_α) decreased with increasing content of methyl acrylate monomers (C_MA%). The β relaxation temperature (T_β) also decreased whereas the activation energy (H_β) showed only small variations compared with H_α. Moreover, the indention displacement and creep compliance strongly depended on C_MA%. Two creep stages were found in the creep compliance curves.     

Excited‐state deactivation channels via internal conversions in two position isomers of hydroxy‐methyl‐pyridine: a theoretical study

Two position isomers of hydroxy‐methyl‐pyridine (3‐hydroxy‐2‐methyl‐pyridine and 2‐hydroxy‐3‐methyl‐pyridine) were studied theoretically at the BLYP level of theory in order to find mechanisms explaining the excited‐state deactivations of isomers through ring puckering and “ethylene‐like” conical intersections. The study aims also to clarify the mechanisms of the ground‐state proton transfers. Three conical intersections S₀/S₁ for each isomer were found, which are accessible through the ¹ππ* excited states. In both isomers, there is a ¹ππ* excited‐state reaction path, which leads, in a completely barrierless manner, to the one of the conical intersections S₀/S₁. Copyright © 2015 John Wiley & Sons, Ltd.     

Experimental survey of the kinetics of acene Diels–Alder reactions

Second‐order rate constants were gathered for solution Diels–Alder reactions of substituted and unsubstituted acenes, with the intention of ascertaining ideal diene–dienophile combinations. Particular focus was placed on the larger ring systems namely tetracene, pentacene, and rubrene. The rate constants between the acenes ranged roughly six orders of magnitude, from the slowest reacting diene, rubrene, to the fastest diene, pentacene. The utilized dienophiles covered a large range of reactivity from 2,3‐dichloromaleic anhydride to tetracyanoethylene. To aid in the interpretation of acene reactivity, constants were compared to the extensive body of Diels–Alder literature with well‐studied dienes such as anthracene and trans‐1‐methoxy‐1,3‐butadiene serving as points of reference. Complex reaction kinetics for the addition of MeTAD and rubrene was found: initial fast consumption generated an intermediate, followed by dramatically slower product formation. The kinetic data creates a foundation for the analysis of prior and future reactions between organic semiconductor acene materials with volatized dienophiles, a surface functionalization technique for enhancing these electronic materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Facile Synthesis of Novel Polyethylene‐Based A‐B‐C Block Copolymers Containing Poly(methyl methacrylate) Using a Living Polymerization System

Ethylene–propylene–methyl methacrylate (MMA) and ethylene–hexene–MMA A‐B‐C block copolymers with high molecular weight (>100 000) are synthesized using fluorenylamide‐ligated titanium complex activated by modified methylaluminoxane and 2,6‐di‐tert‐butyl‐4‐methylphenol for the first time. After diblock copolymerization of olefin is conducted completely, MMA is added and activated by aluminum Lewis acid to promote anionic polymerization. The length of polyolefin and poly (methyl methacrylate) (PMMA) is controllable precisely by the change of the additive amount of olefin and polymerization time, respectively. A soft amorphous polypropylene or polyhexene segment is located between two hard segments of semicrystalline polyethylene and glassy PMMA blocks.

     

Ultrasonic investigation of interpenetrating networks of poly(methyl methacrylate) and polyurethane

Interpenetrating networks are the most recent development in polymeric blend materials. Due to the crosslinking of both the continuous and dispersed phases, a high degree of molecular mixing is achieved in these materials. Notwith-standing that poly(methyl methacrylate)-polyurethane (PMMA-PUR) interpene-trating and semi-interpenetrating networks have been extensively investigated by Meyer et al., ultrasonic relaxation technique has been applied here for the first time. These materials were found to be highly ultrasound absorbing.It is observed that ultrasonic absorption has a peak at a particular composition of PMMA-PUR interpenetrating network. The absorption coefficient increases with frequencyf. The absorption is of relaxational nature and is not due to the scattering of ultrasonic waves by the domains of the dispersed phase. At every composition of the interpenetrating network, the/f ² vs.f curve indicates the presence of a relaxation frequency below 2 MHz and that the absorption increases with the temperature at some compositions which indicates the presence of thermal relaxation. An attempt is made to relate the absorption with the relaxation of pendent groups of polyurethane in the continuous phase.     

NaY 分子筛超笼内离子液体和金属配合物自组装制备溶剂分子和金属配合物一体化催化剂

 采用自组装-瓶中造船法在 NaY 分子筛超笼内, 将溴化 1-癸基-3-甲基咪唑离子液体和邻菲罗啉钯组合成一体化催化剂, 并用于苯胺羰化反应. 结果表明, 相对于以离子液体为溶剂, 邻菲罗啉钯配合物/NaY 分子筛为催化剂的体系, 该一体化催化剂在离子液体和邻菲罗啉钯配合物用量显著降低的条件下, TOF 可达 23 000 h?1, 而相应均相催化剂体系的 TOF 仅为 3 060 h-1.     

钯催化 1,3-丁二烯羧酯化合成 3-戊烯酸甲酯

 以 1,3-丁二烯、CO 和甲醇为原料, 进行羧酯化反应合成 3-戊烯酸甲酯是 Altam 路线生产己内酰胺绿色工艺的关键步骤. 将 Pd 与三齿 N-杂环配体或双膦配体组成的催化体系用于 1,3-丁二烯的羧酯化反应中, 其中乙酸钯/2,6-二 (3,5-二甲基吡唑基) 吡啶催化剂表现出中等的催化活性, 在 150 ºC, p(CO) = 6.0 MPa 的优化条件下反应 6 h, 1,3-丁二烯转化率为 78.8%, 3-戊烯酸甲酯选择性达 92.2% (TON = 226); 而乙酸钯/2,2?-二 (二苯基膦基) 苯醚催化体系的活性更高, 在优化反应条件下, 1,3-丁二烯转化率达 90.4%, 3-戊烯酸甲酯选择性为 91.6% (TON = 181). 在 200 ºC 及类似的羧酯化反应条件下, 1,3-丁二烯发生二聚反应, 其转化率为 99% 以上, 二聚产物 4-乙烯基-1-环己烯选择性高于 96%.