Fluorinated,crosslinkable terpolymers based on vinylidene fluoride and bearing sulfonic acid side groups for fuel‐cell membranes

The radical terpolymerization of 8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene with vinylidene fluoride (VDF) and perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride is presented. Changing the feed compositions of these three fluorinated comonomers enabled us to obtain different random‐type poly[vinylidene fluoride‐ter‐perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride‐ter‐8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene] terpolymers containing various sulfonyl fluoride and brominated side groups. Yields higher than 70% were reached in all cases. The hydrolysis of the sulfonyl fluoride group into the ? SO₃Li function in the presence of lithium carbonate was quantitatively achieved without the content of VDF being affected, and so dehydrofluorination of the VDF base unit was avoided. These original terpolymers were then crosslinked via dangling bromine atoms in the presence of a peroxide/triallyl isocyanurate system, which produced films insoluble in organic solvents such as acetone and dimethylformamide (which totally dissolved uncured terpolymers). The acidification of ? SO₃Li into the ? SO₃H function enabled protonic membranes to be obtained. The thermal stabilities of the crosslinked materials were higher than those of the uncured terpolymers, and their electrochemical performances were investigated. According to the contents of the sulfonic acid side functions, the ion‐exchange capacities ranged from 0.6 to 1.5 mequiv of H⁺/g, whereas the water uptake and conductivities ranged from 5–26% (±11%) and from 0.5 to 6.0 mS/cm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4566–4578, 2006     

Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

Synthesis of well‐defined syndiotactic poly(methyl methacrylate) with low‐temperature atom transfer radical polymerization in fluoroalcohol

The copper‐mediated atom transfer radical polymerization of methyl methacrylate (MMA) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied to simultaneously control the molecular weight and tacticity. The polymerization using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as a ligand was performed even at ?78°C with a number‐average molecular weight (M_n) of 13,400 and a polydispersity (weight‐average molecular weight/number‐average molecular weight) of 1.31, although the measured M_n's were much higher than the theoretical ones. The addition of copper(II) bromide (CuBr₂) apparently affected the early stage of the polymerization; that is, the polymerization could proceed in a controlled manner under the condition of [MMA]₀/[methyl α‐bromoisobutyrate]₀/[CuBr]₀/[CuBr₂]₀/[Me₆TREN]₀ = 200/1/1/0.2/1.2 at ?20°C with an MMA/HFIP ratio of 1/4 (v/v). For the field desorption mass spectrum of Cu^IBr/Me₆TREN in HFIP, there were [Cu(Me₆TREN)Br]⁺ and [Cu(Me₆TREN)OCH(CF₃)₂]⁺, indicating that HFIP should coordinate to the Cu^I/Me₆TREN complex. The syndiotacticity of the obtained poly(methyl methacrylate)s increased with the decreasing polymerization temperature; the racemo content was 84% for ?78°C, 77% for ?30°C, 75% for ?20°C, and 63% for 30°C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1436–1446, 2006     

Study of the spectrum of CH335C1 between 4250 and 4600 CM?1: thev2+v4 andv4+v5 rovibrational bands

About 2500 lines of CH₃ ³⁵Cl have been assigned. The strong xy Coriolis resonance between thev ₂ andv ₅ modes is quite visible between thev ₄+v ₄ ^±1 perpendicular band, centered around 4383 cm^–1, and thev ₄ ^±1 +v ₅ ^±1 perpendicular component, centered around 4475 cm^–1, with a crossing of upper energy levels allowing the observation of lines which are normally forbidden. Although not yet observed with certainty, because of the great density of lines of the spectrum, thev ₄ ¹ +v ₅ ^±1 parallel component is nevertheless detectable by its effects onv ₂+v ₄ ^±1 which is linked by Coriolis resonance to both components ofv ₄+v ₅. Moreover the spectrum is much complicated by many other resonances with weak bands which occur at level crossings: it is the case ofv ₂+3v ₆ ^±1 , connected tov ₂+v ₄ ^±1 by the well known Darling Dennison resonance which couplesv ₄ ^±1 and 3v ₆ ^±1 , and also ofv ₅ ^±1 +3v ₆ ^±1 connected tov ₄ ^±1 +v ₅ ^±1 by the same resonance; but this last case is complicated by an anharmonic resonance betweenv ₅ ^±1 +3v ₆ ^±1 and 2v ₃+3v ₆ ¹ . Two more perturbations occur on the K=–1 side ofv ₂+v ₄: a weak Coriolis resonance gives rise to one subband ofv ₁+v ₂ at a level crossing withv ₂+v ₄, and thev ₁+v ₅ band (linked of course tov ₁+v ₂ by the Coriolis resonance between thev ₂ andv ₅ modes) is quite visible and perturbs several subbands ofv ₂+v ₄ of high values of K through an anharmonic resonance. Moreover, the complex (3v ₅ ^±1 ,v+2v ₅ ⁰ , 2v ₂+v ₅ ^±1 , 3v ₂,v ₂+2v ₅ ^±2 , 3v ₅ ^±3 ) system of Coriolis-connected bands is linked to the bands studied in the present work by two Fermi resonances: one betweenv ₂+2v ₅ ⁰ andv ₁+v ₂, and the other one betweenv ₁+v ₅ and 3v ₅ ^±1 , whose several subbands have been observed on the low part of the spectrum. The values of all the band centres and of the different coupling constants have been estimated, but all these interactions make the line assignments and the interpretation of the spectrum very difficult.     

微乳液法制备超细K2Ln2Ti3O10及其光催化活性研究

以钛酸四丁酯、氢氧化钾和镧系金属氧化物为原料。采用微乳液法制备了系列超细K2Ln2Ti3O10（Ln=La．Ce,Pr．Nd，Sm，Eu，Gd）光催化剂。并考察了其光催化活性。通过X射线衍射（XRD）、透射电镜（TEM）和紫外可见吸收光谱（UV—Vis）对其进行了表征。结果表明：用微乳液法制备催化剂可以在较低的温度下（900℃），用较短的烧结时间（3h）合成结晶度高、粒径较小（200Mm）的K2Ln2Ti3O10钙钛矿型层状结构化合物。催化剂在紫外光和可见光条件下均具有光催化降解甲基橙的活性。紫外光条件下可以明显提高光催化降解活性，降解率达到60％。     

Unprecedented intermolecular aldol-type condensation involving CH-acid and the nitro group

The first evidence that α-acylnitrone is an intermediate in the base-promoted reaction of 4-nitro-N,N-diethylaniline with aceptophenome to give an enaminoketone was obtained. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1645–1647, August, 1998.     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.     

Properties and Photoelectrocatalytic Behaviour of Sol-Gel Derived TiO2 Thin Films

Titanium dioxide (TiO₂) thin films have been prepared on indium doped tin oxide (ITO) glass by sol-gel dip-coating method. Properties of the films were determined as a function of heat-treatment by X-ray diffraction, scanning electron microscopy and photoelectrochemical tests. The films heat-treated at higher temperatures show better crystallinity and photoresponse. The microscopic structure on the film after heat-treatment is attributed to the incorporation of organic polymer into the precursor solution. The performance of the electrodes treated at different temperature on photoelectrocatalytic degradation of methyl orange was investigated. The effect of applied potential and the ability of the electrode to be repeatedly used in photoelectrocatalytic degradation were also evaluated.     

二铁取代硅钨酸盐光解引发甲基橙的脱色

合成了SiW10Fe2的季胺盐(Fe2POM),并对其结构进行了表征.以Fe2POM为催化剂,研究了甲基橙的起始浓度、催化剂添加量、不同pH值等因素对光脱色速率的影响.利用异丙醇作为·OH捕获剂,探讨了甲基橙在Fe2POM-H2O2体系中的光化学脱色规律和机制.结果表明:体系在较宽的pH范围内具有高的光脱色活性,40—160mg/L初始质量浓度范围内,甲基橙的脱色速率随初始浓度降低而升高,脱色过程符合表观一级反应动力学规律.各体系的光脱色活性依次为:Fe2POM-H2O2单纯的Fe2POM>单纯的光照.     

(R)-4-Menthenone in the synthesis of optically pure sex pheromone of the peach leafminer moth (Lyonetia clerkella)

The synthesis of (14S)-methyloctadec-1-ene, sex pheromone of the peach leafminer moth (Lyonetia clerkella), is described to demonstrate a new potential of the synthetic use of (R)-4-menthenone.